Component Flat Washer, Brass, Round Shape, USA Made, #4 Bolt Size, 0.125" ID, 0.250" OD, 0.063" Thick (Pack of 10)

Component Flat Washer, Brass, Round Shape, USA Made, #4 Bolt Size, 0.125" ID, 0.250" OD, 0.063" Thick (Pack of 10) Reviews

Other Picture

Component Flat Washer, Brass, Round Shape, USA Made, #4 Bolt Size, 0.125" ID, 0.250" OD, 0.063" Thick (Pack of 10) Feature

• An extra thick flat washer that comes in steel, 18-8 and 316 Stainless, and Brass
• A stamped flatwasher originally used in the tool and die industry, and now used for its' extra thick design which has superior load distribution properties
• Brass is a soft material that offers excellent corrosion resistance, especially in marine environments, and are not magnetic
• Used for general MRO and industrial applications - excellent for marine environments
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. Brass material offers excellent corrosion resistance, are non magnetic, soft, and are an attractive gold color.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Brass C260 Seamless Round Tubing, 3/8" OD,0.317"ID, 0.029" Wall, 12" Length
• Advanced Tool Design Model ATD-359 110 Piece Copper Washer Assortment
• Dremel 512E EZ Lock Fine Grit Finishing Abrasive Buffs, 2-Pack
• SE Pick Set, 12Pc
• SE Diamond Wheel Set 6PC DW13 1/8" Shank

Detail Reviews

Sep 24, 2011 23:50:03

Hard Fiber Flat Washer, 5/16", 0.344" ID, 0.875" OD, 0.063" Thick (Pack of 100)

Hard Fiber Flat Washer, 5/16", 0.344" ID, 0.875" OD, 0.063" Thick (Pack of 100) Reviews

Other Picture

Hard Fiber Flat Washer, 5/16", 0.344" ID, 0.875" OD, 0.063" Thick (Pack of 100) Feature

• Flat Washers are an economical choice^Hard Vulcanized Fiber is suitable for insulation or light duty sealing jobs^Hard Fiber Washers resist compression and help maintain appropriate spacing between materials or parts^Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

This commercial grade vulcanized fiber material performs with continuous heat resistance to 212 degrees Fahrenheit under no load conditions.

Visit Store Now !!

Detail Products

• Nylon 6/6 Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #5-40, 1/4" Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.140" ID, 0.187" OD, 0.035" Thick, 0.312" Shoulder Diameter, 0.062" Length (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, MIL-SPEC, 1/4"-20, 2" Length (Pack of 100)

Detail Reviews

Sep 20, 2011 06:01:07

Component Flat Washer, Brass, Round Shape, USA Made, #0 Bolt Size, 0.063" ID, 0.125" OD, 0.019" Thick (Pack of 25)

Component Flat Washer, Brass, Round Shape, USA Made, #0 Bolt Size, 0.063" ID, 0.125" OD, 0.019" Thick (Pack of 25) Reviews

Other Picture

Component Flat Washer, Brass, Round Shape, USA Made, #0 Bolt Size, 0.063" ID, 0.125" OD, 0.019" Thick (Pack of 25) Feature

• An extra thick flat washer that comes in steel, 18-8 and 316 Stainless, and Brass
• A stamped flatwasher originally used in the tool and die industry, and now used for its' extra thick design which has superior load distribution properties
• Brass is a soft material that offers excellent corrosion resistance, especially in marine environments, and are not magnetic
• Used for general MRO and industrial applications - excellent for marine environments
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. Brass material offers excellent corrosion resistance, are non magnetic, soft, and are an attractive gold color.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Brass C260 Seamless Round Tubing, 3/8" OD,0.317"ID, 0.029" Wall, 12" Length
• Advanced Tool Design Model ATD-359 110 Piece Copper Washer Assortment
• Dremel 512E EZ Lock Fine Grit Finishing Abrasive Buffs, 2-Pack
• SE Pick Set, 12Pc
• SE Diamond Wheel Set 6PC DW13 1/8" Shank

Detail Reviews

Aug 29, 2011 00:56:04

Hard Fiber Flat Washer, 1/4", 0.281" ID, 0.734" OD, 0.063" Thick (Pack of 100)

Hard Fiber Flat Washer, 1/4", 0.281" ID, 0.734" OD, 0.063" Thick (Pack of 100) Reviews

Other Picture

Hard Fiber Flat Washer, 1/4", 0.281" ID, 0.734" OD, 0.063" Thick (Pack of 100) Feature

• Flat Washers are an economical choice^Hard Vulcanized Fiber is suitable for insulation or light duty sealing jobs^Hard Fiber Washers resist compression and help maintain appropriate spacing between materials or parts^Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

This commercial grade vulcanized fiber material performs with continuous heat resistance to 212 degrees Fahrenheit under no load conditions.

Visit Store Now !!

Detail Products

• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #6-32, 2" Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.120" ID, 0.154" OD, 0.062" Thick, 0.291" Shoulder Diameter, 0.296" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #1-72, 5/16" Length (Pack of 100)

Detail Reviews

Jun 11, 2011 08:33:03

Fiberglass Flat Washer, ANSI, 3/8", 0.406" ID, 1" OD, 0.063" Thick (Pack of 10)

Fiberglass Flat Washer, ANSI, 3/8", 0.406" ID, 1" OD, 0.063" Thick (Pack of 10) Reviews

Other Picture

Fiberglass Flat Washer, ANSI, 3/8", 0.406" ID, 1" OD, 0.063" Thick (Pack of 10) Feature

• Washers distribute load on a fastener
• Fiberglass is suitable for applications where tensile strength to weight, non-conductivity and corrosion resistance are all important considerations
• Size Name corresponds to matching screw or bolt size

Washers are generally round plates with a hole, designed to distribute the load on a threaded fastener. They can also be used as spacers or to reduce vibration.

Nonconductive and resistant to many corrosives, Fiberglass is a good choice for applications threatened by salt water, oils, mild solvents, and other harsh environments. G-10 is a glass reinforced fiberglass, utilizing a continuous woven glass fabric laminated with an epoxy resin. The glass reinforcing increases tensile strength over non-reinforced fiberglass, G-10 in particular is rated at 38,000 psi (pounds per square inch range). G-10 exhibits a high tensile strength to weight ratio, approximately twice that of Aluminum 2024, for example. G-10 is very non-porous, and will only absorb 0.1% of water if left to soak for 24 hours. G-10 is flame retardant and will operate at temperatures up to 280 degrees without degrading. This material is recommended for applications where superior strength and excellent electrical insulative properties are required over a wide range of temperatures.

Visit Store Now !!

Detail Products

• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Nylon 6/6 Shoulder Washer, #10, 0.201" ID, 0.437" OD, 0.06" Thick (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #0-80, 1/4" Length (Pack of 100)
• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #6-32, 1/2" Length (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #12-24, 1/2" Length (Pack of 100)

Detail Reviews

Jun 05, 2011 04:25:06

MIL-SPEC Flat Washer, Meets Spec NAS1149, 18-8 Stainless Steel, Round Shape, USA Made, 7/16" Bolt Size , 0.453" ID, 0.750" OD, 0.063" Thick (Pack of 25)

MIL-SPEC Flat Washer, Meets Spec NAS1149, 18-8 Stainless Steel, Round Shape, USA Made, 7/16" Bolt Size , 0.453" ID, 0.750" OD, 0.063" Thick (Pack of 25) Reviews

Other Picture

MIL-SPEC Flat Washer, Meets Spec NAS1149, 18-8 Stainless Steel, Round Shape, USA Made, 7/16" Bolt Size , 0.453" ID, 0.750" OD, 0.063" Thick (Pack of 25) Feature

• Made in the USA to Military Specifications
• NAS1149 is an updated version of the general purpose Military Specification Flat Washer
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• The sizes listed in this specification cover most industrial and military uses
• Tight tolerances allow use in precision applications

The 3 most popular Military Specification Flat Washers that we offer are MS15795, AN960, NAS1149, and NAS620. These specifications were originally formulated by the Armed Forces of the USA to standardize fasteners being used on military equipment. Over time they have become a popular choice for designers in all industries and programs. All of these specs call out the same material - a 300 series Stainless with passivation. The differences are in the manufacturing tolerances, and the different dimension traits. the first choice should be the MS15795 series, which has the largest OD, and the largest hole diameters. Second choice should be the NAS1149 series. This has a smaller outer diameter, and a tight tolerance on the inner diameter as well as the thickness. AN960 offers an equal to the NAS1149 but with a larger tolerance on the thickness. NAS620 should be the last choice - this series has the smallest outer diameter, and the widest range of thickness tolerance.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

May 11, 2011 18:00:06