Component Flat Washer, 17-4PH Stainless Steel, Plain Finish, Round Shape, USA Made, 0.781" ID, 1.625" OD, 0.156" Thick (Pack of 1)

Component Flat Washer, 17-4PH Stainless Steel, Plain Finish, Round Shape, USA Made, 0.781" ID, 1.625" OD, 0.156" Thick (Pack of 1) Reviews

Other Picture

Component Flat Washer, 17-4PH Stainless Steel, Plain Finish, Round Shape, USA Made, 0.781" ID, 1.625" OD, 0.156" Thick (Pack of 1) Feature

• Component Flat Washers are manufactured with thicker materials for extra strength and load distribution properties
• The most popular sizes of extra strength steel washers in a corrosion resistant stainless steel, that is also Thru Hardened - parts are magnetic
• 17-4 Stainless Steel allows for Thru Hardening for extra strength - the carbon present in the stainless that allows for hardening does reduce the corrosion resistance
• Used anywhere a thick, strong, and corrosion resistant good looking washer is required
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. 17-4PH Stainless Steel material which is Thru Hardened offers excellent strength and hardness. They are magnetic, and are a dark mottled blue color.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 06, 2011 23:33:04

Machined Flat Washer with Beveled Outside Edge, Soft Steel, Plain Finish, Round Shape, USA Made, 0.781" ID, 1.500" OD, 0.250" Thick (Pack of 5)

Machined Flat Washer with Beveled Outside Edge, Soft Steel, Plain Finish, Round Shape, USA Made, 0.781" ID, 1.500" OD, 0.250" Thick (Pack of 5) Reviews

Other Picture

Machined Flat Washer with Beveled Outside Edge, Soft Steel, Plain Finish, Round Shape, USA Made, 0.781" ID, 1.500" OD, 0.250" Thick (Pack of 5) Feature

• Beveled Flat Washers are machined on Lathes, and feature a large bevel or chamfer on the top side
• Originally called "Williams Washers" the large beveled edge on the top of the washer assists operators in assembling products in mass quantities
• 12L14 Low Carbon Steel is machined, and then left soft and plain
• Used in many general industrial applications where corrosion resistance is not needed
• Made In USA for excellent quality conformance

Beveled Flat Washers (also known as "Williams Washers") are turned from solid bar, and feature a large bevel or chamfer on the top outside edge. Originally manufactured for the dual purpose of protecting assemblers from the sharp edges that are possible with a stamped washer, and also to allow them to orient the washer quickly, these washers have gained popularity for other purposes. Used in construction and architectural applications as an interesting visual part of the design, they offer the strength that is provided by their thickness. A small inner diameter provides a tight fit to bolts, rods, and studs, and eliminates most shifting and vibration of the washer. General industrial, marine, power transmission, and agricultural uses are popular.

Manufactured on Lathes from 12L14 Low Carbon Steel, this washer is left soft and plain. Useful for welding this washer to other components, or using it in another manufacturing process. 100% USA made. Available from #10 through 1-1/4" Bolt Size.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 22, 2011 09:24:03

Spherical Flat Washer, Complete Set, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.781" ID, 1.625" OD, 0.219" Thick (Pack of 1)

Spherical Flat Washer, Complete Set, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.781" ID, 1.625" OD, 0.219" Thick (Pack of 1) Reviews

Other Picture

Spherical Flat Washer, Complete Set, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.781" ID, 1.625" OD, 0.219" Thick (Pack of 1) Feature

• A male and female mating set that is self adjusting to align slightly mismatched components
• Male and Female halves are machined for a matched set
• Low Carbon Steel, Case Hardened, Black Oxide Plated
• Machinery, MRO, Power Generation, Transportation, Leveling
• Made In USA for excellent quality conformance

Spherical Washer Sets allow the top and bottom halves to adjust to compensate for uneven or mismatched surfaces, achieving a flat bolting surface. A set consists of a female half (concave) where the washer is hollowed out or curved inward, while the male portion is convex (bulging outwards). These two halves match for a perfect set. The thickness of the set is calculated by putting both halves together and measuring the overall thickness. Both halves are machined and turned on our machines from 12L14 Low Carbon Steel. Parts are then case hardened, which hardens only the top layer of steel, leaving the center soft - this imparts strength on the bearing surface, but allows the part itself to flex, and avoid cracking from being too brittle. A Black Oxide plating is then applied, for appearance and a corrosion inhibitor. Made in the USA.

Visit Store Now !!

Detail Products

Detail Reviews

May 10, 2011 16:09:04

Dress Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 3/4" Bolt Size, 0.781" ID, 1.625" OD, 0.156" Thick (Pack of 1)

Dress Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 3/4" Bolt Size, 0.781" ID, 1.625" OD, 0.156" Thick (Pack of 1) Reviews

Other Picture

Dress Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 3/4" Bolt Size, 0.781" ID, 1.625" OD, 0.156" Thick (Pack of 1) Feature

• Dress Washers are turned on Lathes so the sides are completely straight, and are used in exposed applications for a finished or dress appearance.
• Used in any application where the washers are part of the product design, and are visible to the user of the device
• 18-8 Stainless Steel is a good looking (bright and shiny) material with good surface finish and corrosion resistance
• Used on medical equipment, exercise equipment, instrument panels, etc.
• Made In USA for excellent quality conformance

Dress flat washers are named because they are used to dress up a product. Machined from round stock, they present a finished appearance from all sizes, and front and back. There is no die break on the sides of these washers, as they were produced in Lathes rather than stamped from a coil. Used on faceplates, excercise equipment, high quality architectural hardware, medical and optical instruments, and anywhere that a good looking strong product is required. Extra thick material is used to increase both the strength and the appearance. 303 Series Stainless Steel provides both strength and corrosion resistance. Washers are slightly magnetic from the machining process. Made in the USA.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 18, 2011 18:41:07