3/8X1 1/2 Fender Washer-Chrome

3/8X1 1/2 Fender Washer-Chrome Reviews

Other Picture

3/8X1 1/2 Fender Washer-Chrome

Visit Store Now !!

Detail Products

Detail Reviews

Sep 16, 2011 19:15:18

Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.281" ID, 1.500" OD, 0.052-0.072" Thick (Pack of 50)

Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.281" ID, 1.500" OD, 0.052-0.072" Thick (Pack of 50) Reviews

Other Picture

Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.281" ID, 1.500" OD, 0.052-0.072" Thick (Pack of 50) Feature

• Fender Flat Washers have extra large outside diameters in relation to their bolt size
• Extra large Outside Diameter spreads the load over a wider area
• Low Carbon Steel has a protective Zinc Plating for corrosion resistance - RoHs compliant
• Excellent multi purpose washer for general applications
• Made In USA for excellent quality conformance

Fender Flatwashers were named because of their original use in auto body repair. The large outer diameter covered up a lot of area, and also spread the load across a wide area of thin sheet metal. In todays world these washers are used in electrical, construction, HVAC, and general industrial applications. The purpose of a washer is to spread the load from the head of the bolt across a wider area than the bolt head, which increases the strength of the joint. Fender washers do this well because the outer diameter is so much larger than the diameter of a standard flat washer. These extra thick Fender washers are manufactured in Steel Zinc, 18-8 Stainless Steel, and Type 316 Stainless Steel. The increased thickness provides superior strength, as the thicker the washer, the stronger it gets.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #10-24, 3/8" Length (Pack of 100)
• Zinc Plated Steel Sheet Metal Screw, Pan Head, Phillips Drive, #10-16, 1/2" Length (Pack of 100)
• Zinc Plated Steel Hex Nut, 5/16"-18 (Pack of 100)
• Mirka 23-615-AP 5-Inch 8-Hole Assorted Grits (10 Each Of 80/100/120/150/220) Dustless Hook-and-Loop Sanding Disks
• 3M 8210Plus Particulate Respirator N95, 20-Pack

Detail Reviews

Sep 04, 2011 21:17:04

Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 3/8" Bolt Size, 0.406" ID, 1.500" OD, 0.052-0.072" Thick (Pack of 5)

Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 3/8" Bolt Size, 0.406" ID, 1.500" OD, 0.052-0.072" Thick (Pack of 5) Reviews

Other Picture

Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 3/8" Bolt Size, 0.406" ID, 1.500" OD, 0.052-0.072" Thick (Pack of 5) Feature

• Fender Flat Washers have extra large outside diameters in relation to their bolt size
• Extra large Outside Diameter spreads the load over a wider area
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• Great for homeowner repairs, general MRO applications

Fender Flatwashers were named because of their original use in auto body repair. The large outer diameter covered up a lot of area, and also spread the load across a wide area of thin sheet metal. In todays world these washers are used in electrical, construction, HVAC, and general industrial applications. The purpose of a washer is to spread the load from the head of the bolt across a wider area than the bolt head, which increases the strength of the joint. Fender washers do this well because the outer diameter is so much larger than the diameter of a standard flat washer. These standard (thin) Fender washers are manufactured in Steel Zinc, 18-8 Stainless Steel, and Type 316 Stainless Steel.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Sanyo Eneloop 8 Pack AA NiMH Pre-Charged Rechargeable Batteries

Detail Reviews

Aug 13, 2011 06:29:04

Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.938" ID, 3.250" OD, 0.375" Thick (Pack of 1)

Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.938" ID, 3.250" OD, 0.375" Thick (Pack of 1) Reviews

Other Picture

Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.938" ID, 3.250" OD, 0.375" Thick (Pack of 1) Feature

• Fender Flat Washers have extra large outside diameters in relation to their bolt size
• Extra large Outside Diameter spreads the load over a wider area, and the extra thickness of these washers provide extra strength as well
• A stamped product from low carbon steel, soft, and zinc plated for corrosion resistance
• A versatile washer used anywhere that a large bearing surface and thickness are needed
• Made In USA for excellent quality conformance

Fender Flatwashers were named because of their original use in auto body repair. The large outer diameter covered up a lot of area, and also spread the load across a wide area of thin sheet metal. In todays world these washers are used in electrical, construction, HVAC, and general industrial applications. The purpose of a washer is to spread the load from the head of the bolt across a wider area than the bolt head, which increases the strength of the joint. Fender washers do this well because the outer diameter is so much larger than the diameter of a standard flat washer. These extra thick Fender washers are manufactured in Steel Zinc, 18-8 Stainless Steel, and Type 316 Stainless Steel. The increased thickness provides superior strength, as the thicker the washer, the stronger it gets.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 08, 2011 01:48:03

Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 3/8" Bolt Size, 0.406" ID, 1.625" OD, 0.056-0.070" Thick (Pack of 5)

Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 3/8" Bolt Size, 0.406" ID, 1.625" OD, 0.056-0.070" Thick (Pack of 5) Reviews

Other Picture

Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 3/8" Bolt Size, 0.406" ID, 1.625" OD, 0.056-0.070" Thick (Pack of 5) Feature

• Fender Flat Washers have extra large outside diameters in relation to their bolt size
• Extra large Outside Diameter spreads the load over a wider area
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• Great for homeowner repairs, general MRO applications

Fender Flatwashers were named because of their original use in auto body repair. The large outer diameter covered up a lot of area, and also spread the load across a wide area of thin sheet metal. In todays world these washers are used in electrical, construction, HVAC, and general industrial applications. The purpose of a washer is to spread the load from the head of the bolt across a wider area than the bolt head, which increases the strength of the joint. Fender washers do this well because the outer diameter is so much larger than the diameter of a standard flat washer. These standard (thin) Fender washers are manufactured in Steel Zinc, 18-8 Stainless Steel, and Type 316 Stainless Steel.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Sanyo Eneloop 8 Pack AA NiMH Pre-Charged Rechargeable Batteries

Detail Reviews

Jul 24, 2011 03:13:03

Extra-Thick Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 0.344" ID, 2.000" OD, 0.250" Thick (Pack of 1)

Extra-Thick Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 0.344" ID, 2.000" OD, 0.250" Thick (Pack of 1) Reviews

Other Picture

Extra-Thick Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 0.344" ID, 2.000" OD, 0.250" Thick (Pack of 1) Feature

• Fender Flat Washers have extra large outside diameters in relation to their bolt size
• Extra large Outside Diameter spreads the load over a wider area, and the extra thickness of these washers provide extra strength as well
• A stamped product from low carbon steel, soft, and zinc plated for corrosion resistance
• A versatile washer used anywhere that a large bearing surface and thickness are needed
• Made In USA for excellent quality conformance

Fender Flatwashers were named because of their original use in auto body repair. The large outer diameter covered up a lot of area, and also spread the load across a wide area of thin sheet metal. In todays world these washers are used in electrical, construction, HVAC, and general industrial applications. The purpose of a washer is to spread the load from the head of the bolt across a wider area than the bolt head, which increases the strength of the joint. Fender washers do this well because the outer diameter is so much larger than the diameter of a standard flat washer. These extra thick Fender washers are manufactured in Steel Zinc, 18-8 Stainless Steel, and Type 316 Stainless Steel. The increased thickness provides superior strength, as the thicker the washer, the stronger it gets.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 18, 2011 17:29:04

Fender Flat Washer, 316 Stainless Steel, Round Shape, Plain Finish, USA Made, 1/4" Bolt Size, 0.266" ID, 0.563" OD, 0.056-0.070" Thick (Pack of 25)

Fender Flat Washer, 316 Stainless Steel, Round Shape, Plain Finish, USA Made, 1/4" Bolt Size, 0.266" ID, 0.563" OD, 0.056-0.070" Thick (Pack of 25) Reviews

Other Picture

Fender Flat Washer, 316 Stainless Steel, Round Shape, Plain Finish, USA Made, 1/4" Bolt Size, 0.266" ID, 0.563" OD, 0.056-0.070" Thick (Pack of 25) Feature

• Fender Flat Washers have extra large outside diameters in relation to their bolt size
• Extra large Outside Diameter spreads the load over a wider area
• 316 Stainless Steel offers more corrosion resistance over the standard 18-8 grades
• Great for exposure to salt water, chemical rich environments

Fender Flatwashers were named because of their original use in auto body repair. The large outer diameter covered up a lot of area, and also spread the load across a wide area of thin sheet metal. In todays world these washers are used in electrical, construction, HVAC, and general industrial applications. The purpose of a washer is to spread the load from the head of the bolt across a wider area than the bolt head, which increases the strength of the joint. Fender washers do this well because the outer diameter is so much larger than the diameter of a standard flat washer. These standard (thin) Fender washers are manufactured in Steel Zinc, 18-8 Stainless Steel, and Type 316 Stainless Steel.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Stainless Steel 316 Machine Screw, Flat Head, Phillips Drive, #6-32, 1-1/4" Length (Pack of 25)
• Stainless Steel 316 Machine Screw, Pan Head, Phillips Drive, #4-40, 1/4" Length (Pack of 25)
• Stainless Steel Sheet Metal Screw, Hex Head, Self-Drilling Point, #8-18, 3/4" Length (Pack of 100)
• 3 Pc. Power Extension Socket Adaptor for Drills

Detail Reviews

Jul 12, 2011 08:22:04

Fender Flat Washer, 316 Stainless Steel, Round Shape, Plain Finish, USA Made, 3/8" Bolt Size, 0.406" ID, 1.625" OD, 0.056-0.070" Thick (Pack of 10)

Fender Flat Washer, 316 Stainless Steel, Round Shape, Plain Finish, USA Made, 3/8" Bolt Size, 0.406" ID, 1.625" OD, 0.056-0.070" Thick (Pack of 10) Reviews

Other Picture

Fender Flat Washer, 316 Stainless Steel, Round Shape, Plain Finish, USA Made, 3/8" Bolt Size, 0.406" ID, 1.625" OD, 0.056-0.070" Thick (Pack of 10) Feature

• Fender Flat Washers have extra large outside diameters in relation to their bolt size
• Extra large Outside Diameter spreads the load over a wider area
• 316 Stainless Steel offers more corrosion resistance over the standard 18-8 grades
• Great for exposure to salt water, chemical rich environments

Fender Flatwashers were named because of their original use in auto body repair. The large outer diameter covered up a lot of area, and also spread the load across a wide area of thin sheet metal. In todays world these washers are used in electrical, construction, HVAC, and general industrial applications. The purpose of a washer is to spread the load from the head of the bolt across a wider area than the bolt head, which increases the strength of the joint. Fender washers do this well because the outer diameter is so much larger than the diameter of a standard flat washer. These standard (thin) Fender washers are manufactured in Steel Zinc, 18-8 Stainless Steel, and Type 316 Stainless Steel.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Stainless Steel 316 Machine Screw, Flat Head, Phillips Drive, #6-32, 1-1/4" Length (Pack of 25)
• Stainless Steel 316 Machine Screw, Pan Head, Phillips Drive, 1/4"-20, 3/4" Length (Pack of 25)
• Stainless Steel Sheet Metal Screw, Hex Head, Self-Drilling Point, #10-16, 3/4" Length (Pack of 100)
• 3 Pc. Power Extension Socket Adaptor for Drills

Detail Reviews

Jul 06, 2011 23:45:04

Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.938" ID, 3.000" OD, 0.250" Thick (Pack of 1)

Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.938" ID, 3.000" OD, 0.250" Thick (Pack of 1) Reviews

Other Picture

Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.938" ID, 3.000" OD, 0.250" Thick (Pack of 1) Feature

• Fender Flat Washers have extra large outside diameters in relation to their bolt size
• Extra large Outside Diameter spreads the load over a wider area, and the extra thickness of these washers provide extra strength as well
• A stamped product from low carbon steel, soft, and zinc plated for corrosion resistance
• A versatile washer used anywhere that a large bearing surface and thickness are needed
• Made In USA for excellent quality conformance

Fender Flatwashers were named because of their original use in auto body repair. The large outer diameter covered up a lot of area, and also spread the load across a wide area of thin sheet metal. In todays world these washers are used in electrical, construction, HVAC, and general industrial applications. The purpose of a washer is to spread the load from the head of the bolt across a wider area than the bolt head, which increases the strength of the joint. Fender washers do this well because the outer diameter is so much larger than the diameter of a standard flat washer. These extra thick Fender washers are manufactured in Steel Zinc, 18-8 Stainless Steel, and Type 316 Stainless Steel. The increased thickness provides superior strength, as the thicker the washer, the stronger it gets.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 17, 2011 14:50:03

PFC 3/8" x 1-1/2" Fender Washers Zinc Plated - 100 per Box

PFC 3/8" x 1-1/2" Fender Washers Zinc Plated - 100 per Box Reviews

Other Picture

PFC 3/8" x 1-1/2" Fender Washers Zinc Plated - 100 per Box Feature

• Fender Washers for 3/8" Diameter Bolts
• 1-1/2" Outside Diameter
• Zinc Plated to meet ASTM F1941 FeZn3A
• 100 per Box

PFC 3/8" x 1-1/2" Fender Washers Zinc Plated - 100 per Box

Visit Store Now !!

Detail Products

Detail Reviews

Jun 16, 2011 15:14:03

PFC 1/2" x 1-1/2" Fender Washers Zinc Plated - 100 per Box

PFC 1/2" x 1-1/2" Fender Washers Zinc Plated - 100 per Box Reviews

Other Picture

PFC 1/2" x 1-1/2" Fender Washers Zinc Plated - 100 per Box Feature

• Fender Washers for 1/2" Diameter Bolts
• 1-1/2" Outside Diameter
• Zinc Plated to meet ASTM F1941 FeZn3A
• 100 per Box

PFC 1/2" x 1-1/2" Fender Washers Zinc Plated - 100 per Box

Visit Store Now !!

Detail Products

Detail Reviews

May 31, 2011 09:16:05

Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.219" ID, 1.000" OD, 0.125" Thick (Pack of 5)

Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.219" ID, 1.000" OD, 0.125" Thick (Pack of 5) Reviews

Other Picture

Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.219" ID, 1.000" OD, 0.125" Thick (Pack of 5) Feature

• Fender Flat Washers have extra large outside diameters in relation to their bolt size
• Extra large Outside Diameter spreads the load over a wider area, and the extra thickness of these washers provide extra strength as well
• A stamped product from low carbon steel, soft, and zinc plated for corrosion resistance
• A versatile washer used anywhere that a large bearing surface and thickness are needed
• Made In USA for excellent quality conformance

Fender Flatwashers were named because of their original use in auto body repair. The large outer diameter covered up a lot of area, and also spread the load across a wide area of thin sheet metal. In todays world these washers are used in electrical, construction, HVAC, and general industrial applications. The purpose of a washer is to spread the load from the head of the bolt across a wider area than the bolt head, which increases the strength of the joint. Fender washers do this well because the outer diameter is so much larger than the diameter of a standard flat washer. These extra thick Fender washers are manufactured in Steel Zinc, 18-8 Stainless Steel, and Type 316 Stainless Steel. The increased thickness provides superior strength, as the thicker the washer, the stronger it gets.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

May 30, 2011 11:34:05

Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.406" ID, 2.000" OD, 0.125" Thick (Pack of 5)

Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.406" ID, 2.000" OD, 0.125" Thick (Pack of 5) Reviews

Other Picture

Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.406" ID, 2.000" OD, 0.125" Thick (Pack of 5) Feature

• Fender Flat Washers have extra large outside diameters in relation to their bolt size
• Extra large Outside Diameter spreads the load over a wider area, and the extra thickness of these washers provide extra strength as well
• A stamped product from low carbon steel, soft, and zinc plated for corrosion resistance
• A versatile washer used anywhere that a large bearing surface and thickness are needed
• Made In USA for excellent quality conformance

Fender Flatwashers were named because of their original use in auto body repair. The large outer diameter covered up a lot of area, and also spread the load across a wide area of thin sheet metal. In todays world these washers are used in electrical, construction, HVAC, and general industrial applications. The purpose of a washer is to spread the load from the head of the bolt across a wider area than the bolt head, which increases the strength of the joint. Fender washers do this well because the outer diameter is so much larger than the diameter of a standard flat washer. These extra thick Fender washers are manufactured in Steel Zinc, 18-8 Stainless Steel, and Type 316 Stainless Steel. The increased thickness provides superior strength, as the thicker the washer, the stronger it gets.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

May 18, 2011 19:39:04