Hard Fiber Flat Washer, #5, 0.141" ID, 0.281" OD, 0.031" Thick (Pack of 25)

Hard Fiber Flat Washer, #5, 0.141" ID, 0.281" OD, 0.031" Thick (Pack of 25) Reviews

Other Picture

Hard Fiber Flat Washer, #5, 0.141" ID, 0.281" OD, 0.031" Thick (Pack of 25) Feature

• Flat Washers are an economical choice^Hard Vulcanized Fiber is suitable for insulation or light duty sealing jobs^Hard Fiber Washers resist compression and help maintain appropriate spacing between materials or parts^Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

This commercial grade vulcanized fiber material performs with continuous heat resistance to 212 degrees Fahrenheit under no load conditions.

Visit Store Now !!

Detail Products

• Nylon 6/6 Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #5-40, 3/4" Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.138" ID, 0.218" OD, 0.046" Thick, 0.293" Shoulder Diameter, 0.233" Length (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, 1/4"-20, 1-1/2" Length (Pack of 25)

Detail Reviews

Oct 15, 2011 21:03:03

Vespel Flat Washer, #5, 0.141" ID, 0.281" OD, 0.031" Thick (Pack of 5)

Vespel Flat Washer, #5, 0.141" ID, 0.281" OD, 0.031" Thick (Pack of 5) Reviews

Other Picture

Vespel Flat Washer, #5, 0.141" ID, 0.281" OD, 0.031" Thick (Pack of 5) Feature

• Flat Washers are an economical choice
• Vespel is suitable where high temperature, high strength, and low levels of outgassing are desirable
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Vespel is a high performance polyimide material, which can operate continuously from cryogenic temperatures to 550 degrees Fahrenheit, with excursions to 900 degrees Fahrenheit. Vespel parts exhibit superior performance in a variety of applications requiring low wear and long life in severe environments. Vespel, unlike most plastics, is non-flammable. Parts perform without melting or softening, and resist radiation sterilization more effectively than most other plastics. Vespel parts exhibit a very low level of outgassing, even in high vacuum environments, and are chemically compatible with most fuels, solvents, lubricants and hydraulic fluids. Vespel has above average tensile strength for a polymer, at 12,600 psi (pounds per square inch). Vespel will absorb 0.24% of its weight when exposed to water for 24 hours. Vespel is extremely impact resistant, rated at 14 foot pounds (on the Izod Impact Scale), which compares favorably against Nylon 6/6 at 3 foot pounds. Vespel also has excellent insulating properties, measured in terms of dielectric strength, with a rating of 260 volts/millimeter.

Visit Store Now !!

Detail Products

Detail Reviews

Oct 01, 2011 18:37:03

Dress Flat Washer, Countersunk, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.281" ID, 1.750" OD, 0.281" Thick (Pack of 1)

Dress Flat Washer, Countersunk, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.281" ID, 1.750" OD, 0.281" Thick (Pack of 1) Reviews

Other Picture

Dress Flat Washer, Countersunk, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.281" ID, 1.750" OD, 0.281" Thick (Pack of 1) Feature

• A component washer that has a 82 degree countersunk inner diameter that allows any standard flat head screw to seat flush with the top of the washer, presenting a completely finished and smooth appearance
• A machined component perfect for exposed applications that require strength and a smooth and flush dressed appearance
• Machined from 12L14 Low Carbon Steel, with a Black Oxide plating
• A machined component used on faceplates, handles, and anywhere you need flush mount
• Made In USA for excellent quality conformance

Dress Countersunk Washers are designed for standard 82 degree flat head bolts and screws. The countersunk Inner Diameter allows the screw to mount flush in the washer, presenting a safe and good looking joint. Designed for hand wheels, cranks, and any moving part that is on the outside of a product, the washer spreads the load from the joint across a wider area, and presents a safe and secure fastening. Manufactured on Lathes, these fully machined and finished parts are more industrial component than flat washer. The line accepts standard screws from number 8 through 1/4" bolts, with an extra thickness that looks good and provides extra holding power. Made in the USA from DFARS compliant 12L14 Low Carbon Steel, then case hardened and black oxide plated for strength, appearance, and a slight corrosion inhibitor.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 13, 2011 18:39:19

Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.281" ID, 1.500" OD, 0.052-0.072" Thick (Pack of 50)

Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.281" ID, 1.500" OD, 0.052-0.072" Thick (Pack of 50) Reviews

Other Picture

Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.281" ID, 1.500" OD, 0.052-0.072" Thick (Pack of 50) Feature

• Fender Flat Washers have extra large outside diameters in relation to their bolt size
• Extra large Outside Diameter spreads the load over a wider area
• Low Carbon Steel has a protective Zinc Plating for corrosion resistance - RoHs compliant
• Excellent multi purpose washer for general applications
• Made In USA for excellent quality conformance

Fender Flatwashers were named because of their original use in auto body repair. The large outer diameter covered up a lot of area, and also spread the load across a wide area of thin sheet metal. In todays world these washers are used in electrical, construction, HVAC, and general industrial applications. The purpose of a washer is to spread the load from the head of the bolt across a wider area than the bolt head, which increases the strength of the joint. Fender washers do this well because the outer diameter is so much larger than the diameter of a standard flat washer. These extra thick Fender washers are manufactured in Steel Zinc, 18-8 Stainless Steel, and Type 316 Stainless Steel. The increased thickness provides superior strength, as the thicker the washer, the stronger it gets.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #10-24, 3/8" Length (Pack of 100)
• Zinc Plated Steel Sheet Metal Screw, Pan Head, Phillips Drive, #10-16, 1/2" Length (Pack of 100)
• Zinc Plated Steel Hex Nut, 5/16"-18 (Pack of 100)
• Mirka 23-615-AP 5-Inch 8-Hole Assorted Grits (10 Each Of 80/100/120/150/220) Dustless Hook-and-Loop Sanding Disks
• 3M 8210Plus Particulate Respirator N95, 20-Pack

Detail Reviews

Sep 04, 2011 21:17:04

PVDF Flat Washer, #6, 0.141" ID, 0.281" OD, 0.031" Thick (Pack of 5)

PVDF Flat Washer, #6, 0.141" ID, 0.281" OD, 0.031" Thick (Pack of 5) Reviews

Other Picture

PVDF Flat Washer, #6, 0.141" ID, 0.281" OD, 0.031" Thick (Pack of 5) Feature

• Flat Washers are an economical choice
• PVDF is suitable for applications that require high purity and low water absorption, along with greater strength than PTFE
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Polyvinylidene Fluoride, or PVDF, has a useful temperature range of -148 to 300 degrees Fahrenheit. PVDF exhibits similar properties to Kynar, a trade name of the Arkema Corporation. PVDF is generally used in applications requiring high purity, strength, and resistance to solvents, acids, bases and heat. It also generates little smoke during a fire event. PVDF exhibits below average strength as compared to Nylon 6/6, with tensile strength ranging from 5000 to 7000 psi (pounds per square inch) and impact strength of 1.2 foot pounds (on the Izod Impact Scale) as compared to 9000 psi, and 3 foot pounds, respectively. PVDF is stronger than PTFE and could be desirable where PTFE is not strong enough for the application. PVDF will absorb little or no water after 24 hours of exposure (less than 0.05% of weight impact). PVDF also has below average dielectric strength of 260 volts per millimeter (compared to 500 volts/mm for Nylon).

Visit Store Now !!

Detail Products

Detail Reviews

Aug 31, 2011 00:01:05

Component Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1-1/4" Bolt Size, 1.281" ID, 2.500" OD, 0.281" Thick (Pack of 1)

Component Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1-1/4" Bolt Size, 1.281" ID, 2.500" OD, 0.281" Thick (Pack of 1) Reviews

Other Picture

Component Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1-1/4" Bolt Size, 1.281" ID, 2.500" OD, 0.281" Thick (Pack of 1) Feature

• Component Flat Washers are manufactured with thicker materials for extra strength and load distribution properties
• The most popular sizes of extra strength steel washers in a corrosion resistant stainless steel
• 18-8 Stainless Steel is a good looking (bright and shiny) material with good surface finish and corrosion resistance
• Used anywhere a thick, strong, and corrosion resistant good looking washer is required
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. 18-8 Stainless Steel material offers excellent corrosion resistance, are harder than Brass, exhibit a slight magnetism, and are an attractive silver color.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Stainless Steel 316 Hex Bolt, 5/16"-18, 2-1/4" Length (Pack of 5)

Detail Reviews

Jul 30, 2011 09:03:03

Hard Fiber Flat Washer, 1/4", 0.281" ID, 0.734" OD, 0.063" Thick (Pack of 100)

Hard Fiber Flat Washer, 1/4", 0.281" ID, 0.734" OD, 0.063" Thick (Pack of 100) Reviews

Other Picture

Hard Fiber Flat Washer, 1/4", 0.281" ID, 0.734" OD, 0.063" Thick (Pack of 100) Feature

• Flat Washers are an economical choice^Hard Vulcanized Fiber is suitable for insulation or light duty sealing jobs^Hard Fiber Washers resist compression and help maintain appropriate spacing between materials or parts^Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

This commercial grade vulcanized fiber material performs with continuous heat resistance to 212 degrees Fahrenheit under no load conditions.

Visit Store Now !!

Detail Products

• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #6-32, 2" Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.120" ID, 0.154" OD, 0.062" Thick, 0.291" Shoulder Diameter, 0.296" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #1-72, 5/16" Length (Pack of 100)

Detail Reviews

Jun 11, 2011 08:33:03

Beveled FW Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1/4" Bolt Size, 0.281" ID, 0.625" OD, 0.125" Thick (Pack of 5)

Beveled FW Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1/4" Bolt Size, 0.281" ID, 0.625" OD, 0.125" Thick (Pack of 5) Reviews

Other Picture

Beveled FW Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1/4" Bolt Size, 0.281" ID, 0.625" OD, 0.125" Thick (Pack of 5) Feature

• Beveled Flat Washers are machined on Lathes, and feature a large bevel or chamfer on the top side
• The top bevel allows easier installation in tight spaces, and the part looks like a design feature of any product it is used on
• 18-8 Stainless Steel has a nice surface finish and is the most commonly used corrosion resistant material used
• Chemical, Marine, outdoor, power transmission are a few industries where these parts are used
• Made In USA for excellent quality conformance

Beveled Flat Washers (also known as "Williams Washers") are turned from solid bar, and feature a large bevel or chamfer on the top outside edge. Originally manufactured for the dual purpose of protecting assemblers from the sharp edges that are possible with a stamped washer, and also to allow them to orient the washer quickly, these washers have gained popularity for other purposes. Used in construction and architectural applications as an interesting visual part of the design, they offer the strength that is provided by their thickness. A small inner diameter provides a tight fit to bolts, rods, and studs, and eliminates most shifting and vibration of the washer. General industrial, marine, power transmission, and agricultural uses are popular.

Manufactured on Lathes from Type 303 Stainless Steel bar, this washer is 100% USA made. Available from #10 through 1-1/4" Bolt Size.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 07, 2011 02:26:03

Component Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1/4" Bolt Size, 0.281" ID, 0.625" OD, 0.188" Thick (Pack of 5)

Component Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1/4" Bolt Size, 0.281" ID, 0.625" OD, 0.188" Thick (Pack of 5) Reviews

Other Picture

Component Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1/4" Bolt Size, 0.281" ID, 0.625" OD, 0.188" Thick (Pack of 5) Feature

• Component Flat Washers are manufactured with thicker materials for extra strength and load distribution properties
• A stamped flatwasher originally used in the tool and die industry, and now used for its' extra thick design which has superior load distribution properties
• 18-8 Stainless Steel has a nice surface finish and is the most commonly used corrosion resistant material used
• Used for general MRO and industrial applications - excellent for marine environments
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. 18-8 Stainless Steel material offers excellent corrosion resistance, are harder than Brass, exhibit a slight magnetism, and are an attractive silver color.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

May 26, 2011 18:12:46

Extra-Thick Component Flat Washer, Steel, Black Oxide, Round Shape, USA Made, 0.281" ID, 0.625" OD, 0.188" Thick (Pack of 10)

Extra-Thick Component Flat Washer, Steel, Black Oxide, Round Shape, USA Made, 0.281" ID, 0.625" OD, 0.188" Thick (Pack of 10) Reviews

Other Picture

Extra-Thick Component Flat Washer, Steel, Black Oxide, Round Shape, USA Made, 0.281" ID, 0.625" OD, 0.188" Thick (Pack of 10) Feature

• Component Flat Washers are manufactured with thicker materials for extra strength and load distribution properties
• Extra Thick for extra strength and load distribution properties
• Low Carbon Steel, Case Hardened, and Black Oxide Plated
• General industrial, mechanical, machinery, power transmission uses
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. Low Carbon Steel is case hardened for extra surface hardness, while retaining the flexibility of a soft inner core, and then black oxide plated for an attractive finish.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

May 22, 2011 21:20:04

Dress Flat Washer, Countersunk, 18-8 Stainless Steel, Round Shape, USA Made, 0.281" ID, 1.375" OD, 0.281" Thick (Pack of 1)

Dress Flat Washer, Countersunk, 18-8 Stainless Steel, Round Shape, USA Made, 0.281" ID, 1.375" OD, 0.281" Thick (Pack of 1) Reviews

Other Picture

Dress Flat Washer, Countersunk, 18-8 Stainless Steel, Round Shape, USA Made, 0.281" ID, 1.375" OD, 0.281" Thick (Pack of 1) Feature

• Dress washers are machined with an 82 degree countersunk Inner Diameter to accept a flat head bolt completely, and present a finished appearance
• A machined component perfect for exposed applications that require strength and a smooth and flush dressed appearance
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• A machined component used on faceplates, handles, and anywhere you need flush mount
• Made In USA for excellent quality conformance

Dress Countersunk Washers are designed for standard 82 degree flat head bolts and screws. The countersunk Inner Diameter allows the screw to mount flush in the washer, presenting a safe and good looking joint. Designed for hand wheels, cranks, and any moving part that is on the outside of a product, the washer spreads the load from the joint across a wider area, and presents a safe and secure fastening. Manufactured on Lathes, these fully machined and finished parts are more industrial component than flat washer. The line accepts standard screws from number 8 through 1/4" bolts, with an extra thickness that looks good and provides extra holding power. Made in the USA from DFARS compliant 300 series Stainless Steel for strength, appearance, and corrosion resistance.

Visit Store Now !!

Detail Products

Detail Reviews

May 16, 2011 08:56:04

Spacing Flat Washer, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 1.031" ID, 2.063" OD, 0.281" Thick (Pack of 1)

Spacing Flat Washer, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 1.031" ID, 2.063" OD, 0.281" Thick (Pack of 1) Reviews

Other Picture

Spacing Flat Washer, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 1.031" ID, 2.063" OD, 0.281" Thick (Pack of 1) Feature

• Component Flat Washers are manufactured with thicker materials for extra strength and load distribution properties
• Extra Thick for extra strength and load distribution properties
• Low Carbon Steel, Case Hardened, and Black Oxide Plated
• General industrial, mechanical, machinery, power transmission uses
• Made In USA for excellent quality conformance

An extra thick spacing washer based on our line of extra thick component washers, but larger by 1/16" on the outer diameter. Low Carbon Steel is case hardened, then black oxide plated. Made in the USA.

Visit Store Now !!

Detail Products

Detail Reviews

May 07, 2011 06:10:05

PEEK Flat Washer, 1/4", 0.281" ID, 0.734" OD, 0.062" Thick (Pack of 1)

PEEK Flat Washer, 1/4", 0.281" ID, 0.734" OD, 0.062" Thick (Pack of 1) Reviews

Other Picture

PEEK Flat Washer, 1/4", 0.281" ID, 0.734" OD, 0.062" Thick (Pack of 1) Feature

• Washers distribute load on a fastener
• PEEK is suitable where high temperature, strength, and chemical resistance are desirable
• Size Name corresponds to matching screw or bolt size

Washers are generally round plates with a hole, designed to distribute the load on a threaded fastener. They can also be used as spacers or to reduce vibration.

Polyetheretherketone (PEEK) is a superpolymer, or high performance thermoplastic which has excellent chemical resistance and is rated for continuous service to 464 degrees Fahrenheit. It has the best fire safety rating of all thermoplastics. It can be radiation sterilized, tolerating radiation to 1100 M rads without undergoing significant change. The Peek used in these fasteners has been reinforced with 30% glass fibers which improves tensile strength to 22,600 psi (pounds per square inch.). Peek resists water absorption, absorbing 0.11% when exposed to water for 24 hours. Peek is extremely impact resistant, rated at 13.6 foot pounds (on the Izod Impact Scale), which compares favorably against Nylon 6/6 at 3 foot pounds. Peek is below average in terms of dielectric strength, for a plastic, with a rating of 175 volts/millimeter (compared to Nylon with a rating of 550 volts/millimeter).

Visit Store Now !!

Detail Products

• PEEK Machine Screw, Pan Head, Slotted Drive, #4-40, 3/8" Length (Pack of 5)

Detail Reviews

Mar 21, 2011 02:24:06