Component Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 3/8" Bolt Size, 0.406" ID, 0.750" OD, 0.094" Thick (Pack of 10)

Component Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 3/8" Bolt Size, 0.406" ID, 0.750" OD, 0.094" Thick (Pack of 10) Reviews

Other Picture

Component Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 3/8" Bolt Size, 0.406" ID, 0.750" OD, 0.094" Thick (Pack of 10) Feature

• Component Flat Washers are manufactured with thicker materials for extra strength and load distribution properties
• The most popular sizes of extra strength steel washers in a corrosion resistant stainless steel
• 18-8 Stainless Steel is a good looking (bright and shiny) material with good surface finish and corrosion resistance
• Used anywhere a thick, strong, and corrosion resistant good looking washer is required
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. 18-8 Stainless Steel material offers excellent corrosion resistance, are harder than Brass, exhibit a slight magnetism, and are an attractive silver color.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Stainless Steel 316 Hex Bolt, 3/8"-16, 2" Length (Pack of 5)

Detail Reviews

Aug 05, 2011 00:12:04

Dress Flat Washer, Countersunk, 18-8 Stainless Steel, Round Shape, USA Made, 0.188" ID, 0.750" OD, 0.125" Thick (Pack of 2)

Dress Flat Washer, Countersunk, 18-8 Stainless Steel, Round Shape, USA Made, 0.188" ID, 0.750" OD, 0.125" Thick (Pack of 2) Reviews

Other Picture

Dress Flat Washer, Countersunk, 18-8 Stainless Steel, Round Shape, USA Made, 0.188" ID, 0.750" OD, 0.125" Thick (Pack of 2) Feature

• Dress washers are machined with an 82 degree countersunk Inner Diameter to accept a flat head bolt completely, and present a finished appearance
• A machined component perfect for exposed applications that require strength and a smooth and flush dressed appearance
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• A machined component used on faceplates, handles, and anywhere you need flush mount
• Made In USA for excellent quality conformance

Dress Countersunk Washers are designed for standard 82 degree flat head bolts and screws. The countersunk Inner Diameter allows the screw to mount flush in the washer, presenting a safe and good looking joint. Designed for hand wheels, cranks, and any moving part that is on the outside of a product, the washer spreads the load from the joint across a wider area, and presents a safe and secure fastening. Manufactured on Lathes, these fully machined and finished parts are more industrial component than flat washer. The line accepts standard screws from number 8 through 1/4" bolts, with an extra thickness that looks good and provides extra holding power. Made in the USA from DFARS compliant 300 series Stainless Steel for strength, appearance, and corrosion resistance.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 23, 2011 20:17:04

MIL-SPEC Flat Washer, Meets Spec NAS1149, 18-8 Stainless Steel, Round Shape, USA Made, 7/16" Bolt Size , 0.453" ID, 0.750" OD, 0.063" Thick (Pack of 25)

MIL-SPEC Flat Washer, Meets Spec NAS1149, 18-8 Stainless Steel, Round Shape, USA Made, 7/16" Bolt Size , 0.453" ID, 0.750" OD, 0.063" Thick (Pack of 25) Reviews

Other Picture

MIL-SPEC Flat Washer, Meets Spec NAS1149, 18-8 Stainless Steel, Round Shape, USA Made, 7/16" Bolt Size , 0.453" ID, 0.750" OD, 0.063" Thick (Pack of 25) Feature

• Made in the USA to Military Specifications
• NAS1149 is an updated version of the general purpose Military Specification Flat Washer
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• The sizes listed in this specification cover most industrial and military uses
• Tight tolerances allow use in precision applications

The 3 most popular Military Specification Flat Washers that we offer are MS15795, AN960, NAS1149, and NAS620. These specifications were originally formulated by the Armed Forces of the USA to standardize fasteners being used on military equipment. Over time they have become a popular choice for designers in all industries and programs. All of these specs call out the same material - a 300 series Stainless with passivation. The differences are in the manufacturing tolerances, and the different dimension traits. the first choice should be the MS15795 series, which has the largest OD, and the largest hole diameters. Second choice should be the NAS1149 series. This has a smaller outer diameter, and a tight tolerance on the inner diameter as well as the thickness. AN960 offers an equal to the NAS1149 but with a larger tolerance on the thickness. NAS620 should be the last choice - this series has the smallest outer diameter, and the widest range of thickness tolerance.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

May 11, 2011 18:00:06