Machined Flat Washer with Beveled Outside Edge, Case Hardened Steel, Plain Finish, Round Shape, USA Made, 1.156" ID, 2.250" OD, 0.313" Thick (Pack of 2)

Machined Flat Washer with Beveled Outside Edge, Case Hardened Steel, Plain Finish, Round Shape, USA Made, 1.156" ID, 2.250" OD, 0.313" Thick (Pack of 2) Reviews

Other Picture

Machined Flat Washer with Beveled Outside Edge, Case Hardened Steel, Plain Finish, Round Shape, USA Made, 1.156" ID, 2.250" OD, 0.313" Thick (Pack of 2) Feature

• Beveled Flat Washers are machined on Lathes, and feature a large bevel or chamfer on the top side
• Originally called "Williams Washers" the large beveled edge on the top of the washer assists operators in assembling products in mass quantities
• 12L14 Low Carbon Steel is machined, then case hardened, and left plain
• Used in many general industrial applications where corrosion resistance is not needed
• Made In USA for excellent quality conformance

Beveled Flat Washers (also known as "Williams Washers") are turned from solid bar, and feature a large bevel or chamfer on the top outside edge. Originally manufactured for the dual purpose of protecting assemblers from the sharp edges that are possible with a stamped washer, and also to allow them to orient the washer quickly, these washers have gained popularity for other purposes. Used in construction and architectural applications as an interesting visual part of the design, they offer the strength that is provided by their thickness. A small inner diameter provides a tight fit to bolts, rods, and studs, and eliminates most shifting and vibration of the washer. General industrial, marine, power transmission, and agricultural uses are popular.

Manufactured on Lathes from 12L14 Low Carbon Steel, and then case hardened for extra strength, then left plain. Useful for welding this washer to other components, or using it in another manufacturing process. 100% USA made. Available from #10 through 1-1/4" Bolt Size.

Visit Store Now !!

Detail Products

Detail Reviews

Oct 11, 2011 14:56:17

Dress Flat Washer, Countersunk, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.281" ID, 1.750" OD, 0.281" Thick (Pack of 1)

Dress Flat Washer, Countersunk, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.281" ID, 1.750" OD, 0.281" Thick (Pack of 1) Reviews

Other Picture

Dress Flat Washer, Countersunk, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.281" ID, 1.750" OD, 0.281" Thick (Pack of 1) Feature

• A component washer that has a 82 degree countersunk inner diameter that allows any standard flat head screw to seat flush with the top of the washer, presenting a completely finished and smooth appearance
• A machined component perfect for exposed applications that require strength and a smooth and flush dressed appearance
• Machined from 12L14 Low Carbon Steel, with a Black Oxide plating
• A machined component used on faceplates, handles, and anywhere you need flush mount
• Made In USA for excellent quality conformance

Dress Countersunk Washers are designed for standard 82 degree flat head bolts and screws. The countersunk Inner Diameter allows the screw to mount flush in the washer, presenting a safe and good looking joint. Designed for hand wheels, cranks, and any moving part that is on the outside of a product, the washer spreads the load from the joint across a wider area, and presents a safe and secure fastening. Manufactured on Lathes, these fully machined and finished parts are more industrial component than flat washer. The line accepts standard screws from number 8 through 1/4" bolts, with an extra thickness that looks good and provides extra holding power. Made in the USA from DFARS compliant 12L14 Low Carbon Steel, then case hardened and black oxide plated for strength, appearance, and a slight corrosion inhibitor.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 13, 2011 18:39:19

Industry Semi-Standard Component Flat Washer, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.469" ID, 0.922" OD, 0.125" Thick (Pack of 10)

Industry Semi-Standard Component Flat Washer, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.469" ID, 0.922" OD, 0.125" Thick (Pack of 10) Reviews

Other Picture

Industry Semi-Standard Component Flat Washer, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.469" ID, 0.922" OD, 0.125" Thick (Pack of 10) Feature

• Component Flat Washers are manufactured with thicker materials for extra strength and load distribution properties
• Extra Thick for extra strength and load distribution properties
• Low Carbon Steel, Case Hardened, and Black Oxide Plated
• General industrial, mechanical, machinery, power transmission uses
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. Low Carbon Steel is case hardened for extra surface hardness, while retaining the flexibility of a soft inner core, and then black oxide plated for an attractive finish.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 10, 2011 17:49:20

Spherical Flat Washer, Complete Set, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 1.063" ID, 2.000" OD, 0.330" Thick (Pack of 1)

Spherical Flat Washer, Complete Set, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 1.063" ID, 2.000" OD, 0.330" Thick (Pack of 1) Reviews

Other Picture

Spherical Flat Washer, Complete Set, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 1.063" ID, 2.000" OD, 0.330" Thick (Pack of 1) Feature

• A male and female mating set that is self adjusting to align slightly mismatched components
• Male and Female halves are machined for a matched set
• Low Carbon Steel, Case Hardened, Black Oxide Plated
• Machinery, MRO, Power Generation, Transportation, Leveling
• Made In USA for excellent quality conformance

Spherical Washer Sets allow the top and bottom halves to adjust to compensate for uneven or mismatched surfaces, achieving a flat bolting surface. A set consists of a female half (concave) where the washer is hollowed out or curved inward, while the male portion is convex (bulging outwards). These two halves match for a perfect set. The thickness of the set is calculated by putting both halves together and measuring the overall thickness. Both halves are machined and turned on our machines from 12L14 Low Carbon Steel. Parts are then case hardened, which hardens only the top layer of steel, leaving the center soft - this imparts strength on the bearing surface, but allows the part itself to flex, and avoid cracking from being too brittle. A Black Oxide plating is then applied, for appearance and a corrosion inhibitor. Made in the USA.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 25, 2011 15:32:03

Dress Flat Washer, Straight Sides, Case Hardened Steel, Nickel Plated, Round Shape, USA Made, 0.656" ID, 1.375" OD, 0.125" Thick (Pack of 5)

Dress Flat Washer, Straight Sides, Case Hardened Steel, Nickel Plated, Round Shape, USA Made, 0.656" ID, 1.375" OD, 0.125" Thick (Pack of 5) Reviews

Other Picture

Dress Flat Washer, Straight Sides, Case Hardened Steel, Nickel Plated, Round Shape, USA Made, 0.656" ID, 1.375" OD, 0.125" Thick (Pack of 5) Feature

• Machined Flat Washers are produced on Lathes, so they have straight sides without any die break
• The tight fit of the inner diameter minimizes movement, and the thickness provides extra strength
• 12L14 Low Carbon Bar Stock is machined, then case hardened and nickel (silver color) plated for a finished appearance
• Used anywhere the washer is visible to the user, and you need a finished appearance that not only has the strength to work, but also conveys an image of quality and design consideration
• Made In USA for excellent quality conformance

Dress flat washers are named because they are used to dress up a product. Machined from round stock, they present a finished appearance from all sizes, and front and back. There is no die break on the sides of these washers, as they were produced in Lathes rather than stamped from a coil. Used on faceplates, excercise equipment, high quality architectural hardware, medical and optical instruments, and anywhere that a good looking strong product is required. Extra thick material is used to increase both the strength and the appearance. Machined from 12L14 Low Carbon Steel Bar, then case hardened. This hardens just the surface (top and bottom) of the washer, leaving the core soft to avoid cracking from being too brittle. Then Nickel Plated for a vibrant look, as well as corrosion inhibition. Made in the USA.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 23, 2011 00:43:03

Industry Semi-Standard Component Flat Washer, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.656" ID, 1.312" OD, 0.219" Thick (Pack of 5)

Industry Semi-Standard Component Flat Washer, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.656" ID, 1.312" OD, 0.219" Thick (Pack of 5) Reviews

Other Picture

Industry Semi-Standard Component Flat Washer, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.656" ID, 1.312" OD, 0.219" Thick (Pack of 5) Feature

• Component Flat Washers are manufactured with thicker materials for extra strength and load distribution properties
• Extra Thick for extra strength and load distribution properties
• Low Carbon Steel, Case Hardened, and Black Oxide Plated
• General industrial, mechanical, machinery, power transmission uses
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. Low Carbon Steel is case hardened for extra surface hardness, while retaining the flexibility of a soft inner core, and then black oxide plated for an attractive finish.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 17, 2011 10:58:33

Square Flat Washer, Case Hardened Steel, Black Oxide, Square Shape, USA Made, 0.313" ID, 2.000" OD, 0.250" Thick (Pack of 5)

Square Flat Washer, Case Hardened Steel, Black Oxide, Square Shape, USA Made, 0.313" ID, 2.000" OD, 0.250" Thick (Pack of 5) Reviews

Other Picture

Square Flat Washer, Case Hardened Steel, Black Oxide, Square Shape, USA Made, 0.313" ID, 2.000" OD, 0.250" Thick (Pack of 5) Feature

• Square Washers are manufactured with a generous Inner Diameter to allow for the rought tolerances usually found in the construction trades
• This series of Square Washes comes in a range of 2", 3", and 4" Square, and different materials
• Low Carbon Steel, Case Hardened and Black Oxide Plated
• Construction, Power generation, Machinery, Transportation
• Made In USA for excellent quality conformance

Square Washers are most often used in construction where building codes specify them as a structural component of framing and other subsystems, or in channels or square tubing. The square shape prvents them from rotating in the channel. Our square washers are manufactured with extra thick steel and stainless steel. Inner diameters are cut large to allow for hot dip galvanized bolts to fit through easily, and to also provide adjustment and alignment. 2, 2-1/4", 3" and 4" Square are all in stock, and manufactured in the USA. Plain Steel Square Washers are suitable for any use where corrosion resistance is not required, and these washers are soft steel. Case Hardened Steel Square Washers provide extra strength because they are hardened, and then Black Oxide Plated for both appearance and they do add a slight corrosion inhibition. Diamond Square Washers are manufactured from the diamond plate tread steel. By facing the diamondplate into the joint, they dig into soft materials and help anchor the washer in place. Soft Steel Hot Dip Galvanized offer the best corrosion resistance in our steel line. All Made in the USA.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 06, 2011 02:20:03

Spherical Flat Washer, Female (Concave), Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.688" ID, 1.375" OD, 0.219" Thick (Pack of 1)

Spherical Flat Washer, Female (Concave), Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.688" ID, 1.375" OD, 0.219" Thick (Pack of 1) Reviews

Other Picture

Spherical Flat Washer, Female (Concave), Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.688" ID, 1.375" OD, 0.219" Thick (Pack of 1) Feature

• The female half of the spherical washer set, this washer has a negative dish machined into the face that will accept the male positive feature
• Female dished washer is fully machined
• Low Carbon Steel, Case Hardened, Black Oxide Plated
• Machinery, MRO, Power Generation, Transportation, Leveling
• Made In USA for excellent quality conformance

Spherical Washer Sets allow the top and bottom halves to adjust to compensate for uneven or mismatched surfaces, achieving a flat bolting surface. A set consists of a female half (concave) where the washer is hollowed out or curved inward, while the male portion is convex (bulging outwards). These two halves match for a perfect set. The thickness of the set is calculated by putting both halves together and measuring the overall thickness. Both halves are machined and turned on our machines from 12L14 Low Carbon Steel. Parts are then case hardened, which hardens only the top layer of steel, leaving the center soft - this imparts strength on the bearing surface, but allows the part itself to flex, and avoid cracking from being too brittle. A Black Oxide plating is then applied, for appearance and a corrosion inhibitor. Made in the USA.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 30, 2011 06:23:06

Machined Flat Washer with Beveled Outside Edge, Case Hardened Steel, Zinc Plated, Round Shape, USA Made, 0.656" ID, 1.250" OD, 0.250" Thick (Pack of 5)

Machined Flat Washer with Beveled Outside Edge, Case Hardened Steel, Zinc Plated, Round Shape, USA Made, 0.656" ID, 1.250" OD, 0.250" Thick (Pack of 5) Reviews

Other Picture

Machined Flat Washer with Beveled Outside Edge, Case Hardened Steel, Zinc Plated, Round Shape, USA Made, 0.656" ID, 1.250" OD, 0.250" Thick (Pack of 5) Feature

• Beveled Flat Washers are machined on Lathes, and feature a large bevel or chamfer on the top side
• Originally called "Williams Washers" the large beveled edge on the top of the washer assists operators in assembling products in mass quantities
• 12L14 Low Carbon Steel is machined, then case hardened, and Zinc plated for corrosion resistance and appearance - RoHs compliant
• Used in many general industrial applications
• Made In USA for excellent quality conformance

Beveled Flat Washers (also known as "Williams Washers") are turned from solid bar, and feature a large bevel or chamfer on the top outside edge. Originally manufactured for the dual purpose of protecting assemblers from the sharp edges that are possible with a stamped washer, and also to allow them to orient the washer quickly, these washers have gained popularity for other purposes. Used in construction and architectural applications as an interesting visual part of the design, they offer the strength that is provided by their thickness. A small inner diameter provides a tight fit to bolts, rods, and studs, and eliminates most shifting and vibration of the washer. General industrial, marine, power transmission, and agricultural uses are popular.

Manufactured on Lathes from 12L14 Low Carbon Steel, and then case hardened for extra strength, then RoHs Trivalent Zinc Plated. 100% USA made. Available from #10 through 1-1/4" Bolt Size.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 15, 2011 12:23:04

Roughneck Flat Washer, Case Hardened Steel, Plain Finish, Round Shape, USA Made, 0.844" ID, 1.500" OD, 0.250" Thick (Pack of 10)

Roughneck Flat Washer, Case Hardened Steel, Plain Finish, Round Shape, USA Made, 0.844" ID, 1.500" OD, 0.250" Thick (Pack of 10) Reviews

Other Picture

Roughneck Flat Washer, Case Hardened Steel, Plain Finish, Round Shape, USA Made, 0.844" ID, 1.500" OD, 0.250" Thick (Pack of 10) Feature

• Roughneck flat washers are extra thick, strong washers. No finish gives these a rough appearance.
• Case Hardened Steel washers without a finish accept a weld
• Low Carbon Steel, Case Hardened and plain
• Used in applications that require a large, tough washer, where corrosion is not a problem
• Made In USA for excellent quality conformance

Roughneck washers are 4 sizes of extra thick flat washers, with a large tolerance inner diameter. Useful where an extra thick washer is needed, and corrosion resisistance is necessary. Offered in a limited range from 3/8" Bolt Size to 3/4" Bolt size. Stamped or Turned depending on our manufacturing loads, and 100% Made in the USA. Low Carbon Steel is case hardened, but left plain without any plating. Washers have a mottled brown appearance from the heat treat process, and are not corrosion resistant at all.

Visit Store Now !!

Detail Products

Detail Reviews

May 17, 2011 03:57:04

Machined Flat Washer with Beveled Outside Edge, Case Hardened Steel, Plain Finish, Round Shape, USA Made, 0.906" ID, 1.750" OD, 0.250" Thick (Pack of 5)

Machined Flat Washer with Beveled Outside Edge, Case Hardened Steel, Plain Finish, Round Shape, USA Made, 0.906" ID, 1.750" OD, 0.250" Thick (Pack of 5) Reviews

Other Picture

Machined Flat Washer with Beveled Outside Edge, Case Hardened Steel, Plain Finish, Round Shape, USA Made, 0.906" ID, 1.750" OD, 0.250" Thick (Pack of 5) Feature

• Beveled Flat Washers are machined on Lathes, and feature a large bevel or chamfer on the top side
• Originally called "Williams Washers" the large beveled edge on the top of the washer assists operators in assembling products in mass quantities
• 12L14 Low Carbon Steel is machined, then case hardened, and left plain
• Used in many general industrial applications where corrosion resistance is not needed
• Made In USA for excellent quality conformance

Beveled Flat Washers (also known as "Williams Washers") are turned from solid bar, and feature a large bevel or chamfer on the top outside edge. Originally manufactured for the dual purpose of protecting assemblers from the sharp edges that are possible with a stamped washer, and also to allow them to orient the washer quickly, these washers have gained popularity for other purposes. Used in construction and architectural applications as an interesting visual part of the design, they offer the strength that is provided by their thickness. A small inner diameter provides a tight fit to bolts, rods, and studs, and eliminates most shifting and vibration of the washer. General industrial, marine, power transmission, and agricultural uses are popular.

Manufactured on Lathes from 12L14 Low Carbon Steel, and then case hardened for extra strength, then left plain. Useful for welding this washer to other components, or using it in another manufacturing process. 100% USA made. Available from #10 through 1-1/4" Bolt Size.

Visit Store Now !!

Detail Products

Detail Reviews

May 12, 2011 19:08:06

Spherical Flat Washer, Complete Set, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.781" ID, 1.625" OD, 0.219" Thick (Pack of 1)

Spherical Flat Washer, Complete Set, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.781" ID, 1.625" OD, 0.219" Thick (Pack of 1) Reviews

Other Picture

Spherical Flat Washer, Complete Set, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.781" ID, 1.625" OD, 0.219" Thick (Pack of 1) Feature

• A male and female mating set that is self adjusting to align slightly mismatched components
• Male and Female halves are machined for a matched set
• Low Carbon Steel, Case Hardened, Black Oxide Plated
• Machinery, MRO, Power Generation, Transportation, Leveling
• Made In USA for excellent quality conformance

Spherical Washer Sets allow the top and bottom halves to adjust to compensate for uneven or mismatched surfaces, achieving a flat bolting surface. A set consists of a female half (concave) where the washer is hollowed out or curved inward, while the male portion is convex (bulging outwards). These two halves match for a perfect set. The thickness of the set is calculated by putting both halves together and measuring the overall thickness. Both halves are machined and turned on our machines from 12L14 Low Carbon Steel. Parts are then case hardened, which hardens only the top layer of steel, leaving the center soft - this imparts strength on the bearing surface, but allows the part itself to flex, and avoid cracking from being too brittle. A Black Oxide plating is then applied, for appearance and a corrosion inhibitor. Made in the USA.

Visit Store Now !!

Detail Products

Detail Reviews

May 10, 2011 16:09:04

Spacing Flat Washer, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 1.031" ID, 2.063" OD, 0.281" Thick (Pack of 1)

Spacing Flat Washer, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 1.031" ID, 2.063" OD, 0.281" Thick (Pack of 1) Reviews

Other Picture

Spacing Flat Washer, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 1.031" ID, 2.063" OD, 0.281" Thick (Pack of 1) Feature

• Component Flat Washers are manufactured with thicker materials for extra strength and load distribution properties
• Extra Thick for extra strength and load distribution properties
• Low Carbon Steel, Case Hardened, and Black Oxide Plated
• General industrial, mechanical, machinery, power transmission uses
• Made In USA for excellent quality conformance

An extra thick spacing washer based on our line of extra thick component washers, but larger by 1/16" on the outer diameter. Low Carbon Steel is case hardened, then black oxide plated. Made in the USA.

Visit Store Now !!

Detail Products

Detail Reviews

May 07, 2011 06:10:05