Nylon 6/6 Flat Washer, ANSI, #8, 0.188" ID, 0.625" OD, 0.062" Thick (Pack of 100)

Nylon 6/6 Flat Washer, ANSI, #8, 0.188" ID, 0.625" OD, 0.062" Thick (Pack of 100) Reviews

Other Picture

Nylon 6/6 Flat Washer, ANSI, #8, 0.188" ID, 0.625" OD, 0.062" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

• Nylon 6/6 Hex Nut, #4-40 (Pack of 100)
• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.256" ID, 0.290" OD, 0.031" Thick, 0.348" Shoulder Diameter, 0.093" Length (Pack of 100)
• Nylon 6/6 Hex Bolt, #10-32, 1/4" Length (Pack of 50)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 7/8" Length (Pack of 100)

Detail Reviews

Aug 30, 2011 04:41:04

Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 9/16" ID, 1-1/4" OD, 0.062" Thick (Pack of 50)

Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 9/16" ID, 1-1/4" OD, 0.062" Thick (Pack of 50) Reviews

Other Picture

Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 9/16" ID, 1-1/4" OD, 0.062" Thick (Pack of 50) Feature

• Commercial standard flat washer for general industrial or MRO applications where corrosion resistance is needed
• Standard washer for use where corrosion resistance is desired
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• Used for general MRO and industrial applications needing corrosion resistance
• Made In USA for excellent quality conformance

A standard general purpose flat washer manufactured in both 18-8 and Type 316 Stainless Steels, entirely in the USA of DFARS compoant steels. Available from stock in bolt sizes #4 all the way up to 1-1/2". Manufactured from standard gage thicknesses, these washers are good for general industrial, MRO, and anywhere extra strength is not needed.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 21, 2011 16:03:04

Non-Metallic Flat Washer, Fiberglass, Round Shape, USA Made, #10 Bolt Size, 0.203" ID, 0.443" OD, 0.062" Thick (Pack of 50)

Non-Metallic Flat Washer, Fiberglass, Round Shape, USA Made, #10 Bolt Size, 0.203" ID, 0.443" OD, 0.062" Thick (Pack of 50) Reviews

Other Picture

Non-Metallic Flat Washer, Fiberglass, Round Shape, USA Made, #10 Bolt Size, 0.203" ID, 0.443" OD, 0.062" Thick (Pack of 50) Feature

• Insulating Washers of Fiberglass protect components from heat and electricity, and are chemically resistant
• These washers are thicker compared to their outer diameter than usual, for greater strength and insulation
• Polyster Glass Laminates (Fiberglass) come in light tan and green colors
• This Fiberglass material meets General Purpose NEMA (National Electrical Manufacturers Association) GPO-1 Standards
• Made In USA for excellent quality conformance

Fiberglass washers are insulators of both thermal and electrical energy. They are chemically resistant, and have a high strength to weight ratio. This series is available from stock in sizes from numbe 2 thru 1" bolt sizes. Larger sizes have an oversized outside diameter, which protects and insulates.

Polyster Glass Laminates (Fiberglass) come in light tan and green colors, this material meets General Purpose NEMA (National Electrical Manufacturers Association) GPO-1 Standards.Temperatures up to aprox 200 degress are not a problem for this material

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 20, 2011 07:23:10

Non-Metallic Flat Washer, Fiberglass, Round Shape, USA Made, #8 Bolt Size, 0.178" ID, 0.562" OD, 0.062" Thick (Pack of 50)

Non-Metallic Flat Washer, Fiberglass, Round Shape, USA Made, #8 Bolt Size, 0.178" ID, 0.562" OD, 0.062" Thick (Pack of 50) Reviews

Other Picture

Non-Metallic Flat Washer, Fiberglass, Round Shape, USA Made, #8 Bolt Size, 0.178" ID, 0.562" OD, 0.062" Thick (Pack of 50) Feature

• Insulating Washers of Fiberglass protect components from heat and electricity, and are chemically resistant
• These washers are thicker compared to their outer diameter than usual, for greater strength and insulation
• Polyster Glass Laminates (Fiberglass) come in light tan and green colors
• This Fiberglass material meets General Purpose NEMA (National Electrical Manufacturers Association) GPO-1 Standards
• Made In USA for excellent quality conformance

Fiberglass washers are insulators of both thermal and electrical energy. They are chemically resistant, and have a high strength to weight ratio. This series is available from stock in sizes from numbe 2 thru 1" bolt sizes. Larger sizes have an oversized outside diameter, which protects and insulates.

Polyster Glass Laminates (Fiberglass) come in light tan and green colors, this material meets General Purpose NEMA (National Electrical Manufacturers Association) GPO-1 Standards.Temperatures up to aprox 200 degress are not a problem for this material

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 04, 2011 00:31:04

Non-Metallic Flat Washer, Fiberglass, Round Shape, USA Made, 1/2" Bolt Size, 0.515" ID, 0.880" OD, 0.062" Thick (Pack of 25)

Non-Metallic Flat Washer, Fiberglass, Round Shape, USA Made, 1/2" Bolt Size, 0.515" ID, 0.880" OD, 0.062" Thick (Pack of 25) Reviews

Other Picture

Non-Metallic Flat Washer, Fiberglass, Round Shape, USA Made, 1/2" Bolt Size, 0.515" ID, 0.880" OD, 0.062" Thick (Pack of 25) Feature

• Insulating Washers of Fiberglass protect components from heat and electricity, and are chemically resistant
• These washers are thicker compared to their outer diameter than usual, for greater strength and insulation
• Polyster Glass Laminates (Fiberglass) come in light tan and green colors
• This Fiberglass material meets General Purpose NEMA (National Electrical Manufacturers Association) GPO-1 Standards
• Made In USA for excellent quality conformance

Fiberglass washers are insulators of both thermal and electrical energy. They are chemically resistant, and have a high strength to weight ratio. This series is available from stock in sizes from numbe 2 thru 1" bolt sizes. Larger sizes have an oversized outside diameter, which protects and insulates.

Polyster Glass Laminates (Fiberglass) come in light tan and green colors, this material meets General Purpose NEMA (National Electrical Manufacturers Association) GPO-1 Standards.Temperatures up to aprox 200 degress are not a problem for this material

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 25, 2011 18:53:06

Non-Metallic Flat Washer, Fiberglass, Round Shape, USA Made, #3 Bolt Size, 0.105" ID, 0.255" OD, 0.062" Thick (Pack of 50)

Non-Metallic Flat Washer, Fiberglass, Round Shape, USA Made, #3 Bolt Size, 0.105" ID, 0.255" OD, 0.062" Thick (Pack of 50) Reviews

Other Picture

Non-Metallic Flat Washer, Fiberglass, Round Shape, USA Made, #3 Bolt Size, 0.105" ID, 0.255" OD, 0.062" Thick (Pack of 50) Feature

• Insulating Washers of Fiberglass protect components from heat and electricity, and are chemically resistant
• These washers are thicker compared to their outer diameter than usual, for greater strength and insulation
• Polyster Glass Laminates (Fiberglass) come in light tan and green colors
• This Fiberglass material meets General Purpose NEMA (National Electrical Manufacturers Association) GPO-1 Standards
• Made In USA for excellent quality conformance

Fiberglass washers are insulators of both thermal and electrical energy. They are chemically resistant, and have a high strength to weight ratio. This series is available from stock in sizes from numbe 2 thru 1" bolt sizes. Larger sizes have an oversized outside diameter, which protects and insulates.

Polyster Glass Laminates (Fiberglass) come in light tan and green colors, this material meets General Purpose NEMA (National Electrical Manufacturers Association) GPO-1 Standards.Temperatures up to aprox 200 degress are not a problem for this material

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 20, 2011 16:47:13

PEEK Flat Washer, 1/4", 0.281" ID, 0.734" OD, 0.062" Thick (Pack of 1)

PEEK Flat Washer, 1/4", 0.281" ID, 0.734" OD, 0.062" Thick (Pack of 1) Reviews

Other Picture

PEEK Flat Washer, 1/4", 0.281" ID, 0.734" OD, 0.062" Thick (Pack of 1) Feature

• Washers distribute load on a fastener
• PEEK is suitable where high temperature, strength, and chemical resistance are desirable
• Size Name corresponds to matching screw or bolt size

Washers are generally round plates with a hole, designed to distribute the load on a threaded fastener. They can also be used as spacers or to reduce vibration.

Polyetheretherketone (PEEK) is a superpolymer, or high performance thermoplastic which has excellent chemical resistance and is rated for continuous service to 464 degrees Fahrenheit. It has the best fire safety rating of all thermoplastics. It can be radiation sterilized, tolerating radiation to 1100 M rads without undergoing significant change. The Peek used in these fasteners has been reinforced with 30% glass fibers which improves tensile strength to 22,600 psi (pounds per square inch.). Peek resists water absorption, absorbing 0.11% when exposed to water for 24 hours. Peek is extremely impact resistant, rated at 13.6 foot pounds (on the Izod Impact Scale), which compares favorably against Nylon 6/6 at 3 foot pounds. Peek is below average in terms of dielectric strength, for a plastic, with a rating of 175 volts/millimeter (compared to Nylon with a rating of 550 volts/millimeter).

Visit Store Now !!

Detail Products

• PEEK Machine Screw, Pan Head, Slotted Drive, #4-40, 3/8" Length (Pack of 5)

Detail Reviews

Mar 21, 2011 02:24:06

PEEK Flat Washer, #10, 0.203" ID, 0.5" OD, 0.062" Thick (Pack of 5)

PEEK Flat Washer, #10, 0.203" ID, 0.5" OD, 0.062" Thick (Pack of 5) Reviews

Other Picture

PEEK Flat Washer, #10, 0.203" ID, 0.5" OD, 0.062" Thick (Pack of 5) Feature

• Washers distribute load on a fastener
• PEEK is suitable where high temperature, strength, and chemical resistance are desirable
• Size Name corresponds to matching screw or bolt size

Washers are generally round plates with a hole, designed to distribute the load on a threaded fastener. They can also be used as spacers or to reduce vibration.

Polyetheretherketone (PEEK) is a superpolymer, or high performance thermoplastic which has excellent chemical resistance and is rated for continuous service to 464 degrees Fahrenheit. It has the best fire safety rating of all thermoplastics. It can be radiation sterilized, tolerating radiation to 1100 M rads without undergoing significant change. The Peek used in these fasteners has been reinforced with 30% glass fibers which improves tensile strength to 22,600 psi (pounds per square inch.). Peek resists water absorption, absorbing 0.11% when exposed to water for 24 hours. Peek is extremely impact resistant, rated at 13.6 foot pounds (on the Izod Impact Scale), which compares favorably against Nylon 6/6 at 3 foot pounds. Peek is below average in terms of dielectric strength, for a plastic, with a rating of 175 volts/millimeter (compared to Nylon with a rating of 550 volts/millimeter).

Visit Store Now !!

Detail Products

• PEEK Machine Screw, Pan Head, Slotted Drive, #4-40, 3/8" Length (Pack of 5)

Detail Reviews

Mar 19, 2011 03:08:07

Nylon Flat Washer, 5/16", 0.317" ID, 0.5" OD, 0.062" Thick (Pack of 100)

Nylon Flat Washer, 5/16", 0.317" ID, 0.5" OD, 0.062" Thick (Pack of 100) Reviews

Other Picture

Nylon Flat Washer, 5/16", 0.317" ID, 0.5" OD, 0.062" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• 5mm Metric Flat Washer (100 count)
• Nylon Hex Nut, #4-40 (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Stainless Steel Machine Screw, Black Oxide Finish, Pan Head, Phillips Drive, #6-32, 3/4" Length (Pack of 10)

Detail Reviews

Feb 28, 2011 23:08:03

Nylon Flat Washer, #8, 0.177" ID, 0.408" OD, 0.062" Thick (Pack of 100)

Nylon Flat Washer, #8, 0.177" ID, 0.408" OD, 0.062" Thick (Pack of 100) Reviews

Other Picture

Nylon Flat Washer, #8, 0.177" ID, 0.408" OD, 0.062" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• 5mm Metric Flat Washer (100 count)
• Nylon Hex Nut, #4-40 (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Stainless Steel Machine Screw, Black Oxide Finish, Pan Head, Phillips Drive, #6-32, 3/4" Length (Pack of 10)

Detail Reviews

Feb 24, 2011 01:15:05

Nylon Flat Washer, #10, 0.2" ID, 0.437" OD, 0.062" Thick (Pack of 100)

Nylon Flat Washer, #10, 0.2" ID, 0.437" OD, 0.062" Thick (Pack of 100) Reviews

More Picture

Nylon Flat Washer, #10, 0.2" ID, 0.437" OD, 0.062" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Go tO Store Now !!

More Products

• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• 5mm Metric Flat Washer (100 count)
• Nylon Hex Nut, #4-40 (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M2.5-0.45, 5mm Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.124" ID, 0.219" OD, 0.031" Thick, 0.313" Shoulder Diameter, 0.062" Length (Pack of 100)

More Reviews

Feb 19, 2011 12:51:04