Hard Fiber Flat Washer, #8, 0.188" ID, 0.5" OD, 0.04" Thick (Pack of 5)

Hard Fiber Flat Washer, #8, 0.188" ID, 0.5" OD, 0.04" Thick (Pack of 5) Reviews

Other Picture

Hard Fiber Flat Washer, #8, 0.188" ID, 0.5" OD, 0.04" Thick (Pack of 5) Feature

• Flat Washers are an economical choice^Hard Vulcanized Fiber is suitable for insulation or light duty sealing jobs^Hard Fiber Washers resist compression and help maintain appropriate spacing between materials or parts^Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

This commercial grade vulcanized fiber material performs with continuous heat resistance to 212 degrees Fahrenheit under no load conditions.

Visit Store Now !!

Detail Products

• Nylon 6/6 Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #1-72, 3/8" Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.138" ID, 0.218" OD, 0.046" Thick, 0.293" Shoulder Diameter, 0.233" Length (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, 1/4"-20, 1-1/2" Length (Pack of 25)

Detail Reviews

Oct 17, 2011 02:28:03

Component Flat Washer, Brass, Round Shape, USA Made, 1" Bolt Size, 1.031" ID, 2.000" OD, 0.188" Thick (Pack of 1)

Component Flat Washer, Brass, Round Shape, USA Made, 1" Bolt Size, 1.031" ID, 2.000" OD, 0.188" Thick (Pack of 1) Reviews

Other Picture

Component Flat Washer, Brass, Round Shape, USA Made, 1" Bolt Size, 1.031" ID, 2.000" OD, 0.188" Thick (Pack of 1) Feature

• An extra thick flat washer that comes in steel, 18-8 and 316 Stainless, and Brass
• A stamped flatwasher originally used in the tool and die industry, and now used for its' extra thick design which has superior load distribution properties
• Brass is a soft material that offers excellent corrosion resistance, especially in marine environments, and are not magnetic
• Used for general MRO and industrial applications - excellent for marine environments
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. Brass material offers excellent corrosion resistance, are non magnetic, soft, and are an attractive gold color.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Brass C260 Seamless Round Tubing, 3/8" OD,0.317"ID, 0.029" Wall, 12" Length
• Advanced Tool Design Model ATD-359 110 Piece Copper Washer Assortment
• Dremel 512E EZ Lock Fine Grit Finishing Abrasive Buffs, 2-Pack
• SE Pick Set, 12Pc
• SE Diamond Wheel Set 6PC DW13 1/8" Shank

Detail Reviews

Sep 28, 2011 12:25:04

Component Flat Washer, Steel, Black Oxide, Round Shape, USA Made, 0.188" ID, 0.438" OD, 0.078" Thick (Pack of 25)

Component Flat Washer, Steel, Black Oxide, Round Shape, USA Made, 0.188" ID, 0.438" OD, 0.078" Thick (Pack of 25) Reviews

Other Picture

Component Flat Washer, Steel, Black Oxide, Round Shape, USA Made, 0.188" ID, 0.438" OD, 0.078" Thick (Pack of 25) Feature

• Component Flat Washers are manufactured with thicker materials for extra strength and load distribution properties
• The tight fit of the inner diameter minimizes movement, and the thickness provides extra strength
• Low Carbon Steel is case hardened for extra wear resistance, and then black oxide plated for appearance
• Originally used in the tool and die industries, these washers have gained acceptance in MRO, Machinery, and Component industries
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. Low Carbon Steel is case hardened for extra surface hardness, while retaining the flexibility of a soft inner core, and then black oxide plated for an attractive finish.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 18, 2011 15:17:04

Beveled FW Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1/2" Bolt Size, 0.531" ID, 1.000" OD, 0.188" Thick (Pack of 5)

Beveled FW Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1/2" Bolt Size, 0.531" ID, 1.000" OD, 0.188" Thick (Pack of 5) Reviews

Other Picture

Beveled FW Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1/2" Bolt Size, 0.531" ID, 1.000" OD, 0.188" Thick (Pack of 5) Feature

• Beveled Flat Washers are machined on Lathes, and feature a large bevel or chamfer on the top side
• The top bevel allows easier installation in tight spaces, and the part looks like a design feature of any product it is used on
• 18-8 Stainless Steel has a nice surface finish and is the most commonly used corrosion resistant material used
• Chemical, Marine, outdoor, power transmission are a few industries where these parts are used
• Made In USA for excellent quality conformance

Beveled Flat Washers (also known as "Williams Washers") are turned from solid bar, and feature a large bevel or chamfer on the top outside edge. Originally manufactured for the dual purpose of protecting assemblers from the sharp edges that are possible with a stamped washer, and also to allow them to orient the washer quickly, these washers have gained popularity for other purposes. Used in construction and architectural applications as an interesting visual part of the design, they offer the strength that is provided by their thickness. A small inner diameter provides a tight fit to bolts, rods, and studs, and eliminates most shifting and vibration of the washer. General industrial, marine, power transmission, and agricultural uses are popular.

Manufactured on Lathes from Type 303 Stainless Steel bar, this washer is 100% USA made. Available from #10 through 1-1/4" Bolt Size.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 12, 2011 00:43:04

Nylon 6/6 Flat Washer, ANSI, #8, 0.188" ID, 0.625" OD, 0.062" Thick (Pack of 100)

Nylon 6/6 Flat Washer, ANSI, #8, 0.188" ID, 0.625" OD, 0.062" Thick (Pack of 100) Reviews

Other Picture

Nylon 6/6 Flat Washer, ANSI, #8, 0.188" ID, 0.625" OD, 0.062" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

• Nylon 6/6 Hex Nut, #4-40 (Pack of 100)
• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.256" ID, 0.290" OD, 0.031" Thick, 0.348" Shoulder Diameter, 0.093" Length (Pack of 100)
• Nylon 6/6 Hex Bolt, #10-32, 1/4" Length (Pack of 50)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 7/8" Length (Pack of 100)

Detail Reviews

Aug 30, 2011 04:41:04

Component Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, #2 Bolt Size, 0.094" ID, 0.188" OD, 0.028" Thick (Pack of 25)

Component Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, #2 Bolt Size, 0.094" ID, 0.188" OD, 0.028" Thick (Pack of 25) Reviews

Other Picture

Component Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, #2 Bolt Size, 0.094" ID, 0.188" OD, 0.028" Thick (Pack of 25) Feature

• Component Flat Washers are manufactured with thicker materials for extra strength and load distribution properties
• The most popular sizes of extra strength steel washers in a corrosion resistant stainless steel
• 18-8 Stainless Steel is a good looking (bright and shiny) material with good surface finish and corrosion resistance
• Used anywhere a thick, strong, and corrosion resistant good looking washer is required
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. 18-8 Stainless Steel material offers excellent corrosion resistance, are harder than Brass, exhibit a slight magnetism, and are an attractive silver color.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Stainless Steel 316 Hex Bolt, 1/4"-20, 1-3/4" Length (Pack of 25)

Detail Reviews

Aug 28, 2011 00:28:04

Fiberglass Flat Washer, ANSI, #8, 0.188" ID, 0.5" OD, 0.04" Thick (Pack of 25)

Fiberglass Flat Washer, ANSI, #8, 0.188" ID, 0.5" OD, 0.04" Thick (Pack of 25) Reviews

Other Picture

Fiberglass Flat Washer, ANSI, #8, 0.188" ID, 0.5" OD, 0.04" Thick (Pack of 25) Feature

• Washers distribute load on a fastener
• Fiberglass is suitable for applications where tensile strength to weight, non-conductivity and corrosion resistance are all important considerations
• Size Name corresponds to matching screw or bolt size

Washers are generally round plates with a hole, designed to distribute the load on a threaded fastener. They can also be used as spacers or to reduce vibration.

Nonconductive and resistant to many corrosives, Fiberglass is a good choice for applications threatened by salt water, oils, mild solvents, and other harsh environments. G-10 is a glass reinforced fiberglass, utilizing a continuous woven glass fabric laminated with an epoxy resin. The glass reinforcing increases tensile strength over non-reinforced fiberglass, G-10 in particular is rated at 38,000 psi (pounds per square inch range). G-10 exhibits a high tensile strength to weight ratio, approximately twice that of Aluminum 2024, for example. G-10 is very non-porous, and will only absorb 0.1% of water if left to soak for 24 hours. G-10 is flame retardant and will operate at temperatures up to 280 degrees without degrading. This material is recommended for applications where superior strength and excellent electrical insulative properties are required over a wide range of temperatures.

Visit Store Now !!

Detail Products

• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.115" ID, 0.137" OD, 0.046" Thick, 0.240" Shoulder Diameter, 0.077" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #3-48, 1/4" Length (Pack of 100)
• Zinc Plated Steel Sheet Metal Screw, Pan Head, Phillips Drive, #6-20, 1/2" Length (Pack of 100)
• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #4-40, 3/8" Length (Pack of 100)

Detail Reviews

Aug 12, 2011 03:06:08

Stainless Steel 18-8 Flat Washer, ANSI, #8, 0.188" ID, 0.375" OD, 0.04" Thick (Pack of 25)

Stainless Steel 18-8 Flat Washer, ANSI, #8, 0.188" ID, 0.375" OD, 0.04" Thick (Pack of 25) Reviews

Other Picture

Stainless Steel 18-8 Flat Washer, ANSI, #8, 0.188" ID, 0.375" OD, 0.04" Thick (Pack of 25) Feature

• Flat Washers are an economical choice
• Stainless Steel is suitable where formability and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.

Visit Store Now !!

Detail Products

• Stainless Steel Hex Nut, 1/4"-20 (Pack of 100)
• Stainless Steel 18-8 Split Lock Washer, ANSI, #2, 0.088" ID, 0.172" OD, 0.02" Thick (Pack of 100)
• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Zinc Plated Steel Hex Nut, #2-56 (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #1-72, 5/16" Length (Pack of 100)

Detail Reviews

Aug 07, 2011 01:06:05

Extra-Thick Component Flat Washer, Steel, Black Oxide, Round Shape, USA Made, 0.406" ID, 1.000" OD, 0.188" Thick (Pack of 10)

Extra-Thick Component Flat Washer, Steel, Black Oxide, Round Shape, USA Made, 0.406" ID, 1.000" OD, 0.188" Thick (Pack of 10) Reviews

Other Picture

Extra-Thick Component Flat Washer, Steel, Black Oxide, Round Shape, USA Made, 0.406" ID, 1.000" OD, 0.188" Thick (Pack of 10) Feature

• Component Flat Washers are manufactured with thicker materials for extra strength and load distribution properties
• Extra Thick for extra strength and load distribution properties
• Low Carbon Steel, Case Hardened, and Black Oxide Plated
• General industrial, mechanical, machinery, power transmission uses
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. Low Carbon Steel is case hardened for extra surface hardness, while retaining the flexibility of a soft inner core, and then black oxide plated for an attractive finish.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 21, 2011 20:27:06

Nylon 6/6 Flat Washer, #2, 0.094" ID, 0.188" OD, 0.02" Thick (Pack of 100)

Nylon 6/6 Flat Washer, #2, 0.094" ID, 0.188" OD, 0.02" Thick (Pack of 100) Reviews

Other Picture

Nylon 6/6 Flat Washer, #2, 0.094" ID, 0.188" OD, 0.02" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

• Nylon 6/6 Hex Nut, #4-40 (Pack of 100)
• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 12mm Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.120" ID, 0.154" OD, 0.062" Thick, 0.291" Shoulder Diameter, 0.296" Length (Pack of 100)
• Nylon 6/6 Threaded Rod, 5/16"-18, 72" Overall Length (Pack of 1)
• Nylon 6/6 Hex Bolt, #4-40, 1/4" Length (Pack of 100)

Detail Reviews

Jun 28, 2011 20:03:03

Dress Flat Washer, Countersunk, 18-8 Stainless Steel, Round Shape, USA Made, 0.188" ID, 0.750" OD, 0.125" Thick (Pack of 2)

Dress Flat Washer, Countersunk, 18-8 Stainless Steel, Round Shape, USA Made, 0.188" ID, 0.750" OD, 0.125" Thick (Pack of 2) Reviews

Other Picture

Dress Flat Washer, Countersunk, 18-8 Stainless Steel, Round Shape, USA Made, 0.188" ID, 0.750" OD, 0.125" Thick (Pack of 2) Feature

• Dress washers are machined with an 82 degree countersunk Inner Diameter to accept a flat head bolt completely, and present a finished appearance
• A machined component perfect for exposed applications that require strength and a smooth and flush dressed appearance
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• A machined component used on faceplates, handles, and anywhere you need flush mount
• Made In USA for excellent quality conformance

Dress Countersunk Washers are designed for standard 82 degree flat head bolts and screws. The countersunk Inner Diameter allows the screw to mount flush in the washer, presenting a safe and good looking joint. Designed for hand wheels, cranks, and any moving part that is on the outside of a product, the washer spreads the load from the joint across a wider area, and presents a safe and secure fastening. Manufactured on Lathes, these fully machined and finished parts are more industrial component than flat washer. The line accepts standard screws from number 8 through 1/4" bolts, with an extra thickness that looks good and provides extra holding power. Made in the USA from DFARS compliant 300 series Stainless Steel for strength, appearance, and corrosion resistance.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 23, 2011 20:17:04

PTFE Flat Washer, ANSI, #0, 0.068" ID, 0.188" OD, 0.025" Thick (Pack of 100)

PTFE Flat Washer, ANSI, #0, 0.068" ID, 0.188" OD, 0.025" Thick (Pack of 100) Reviews

Other Picture

PTFE Flat Washer, ANSI, #0, 0.068" ID, 0.188" OD, 0.025" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• PTFE is suitable for high temperature environments and for applications that have the potential for surface wear and exposure to water and chemicals
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

PTFE (polytetrafluoroethylene) has similar properties to Teflon, including an extremely low coefficient of friction (it doesn't stick to other materials and it resists surface wear). PTFE also exhibits a useful service life from below -100 degrees Fahrenheit, to temperatures of over 500 degrees Fahrenheit. Its resistance to solvents is also excellent throughout a wide range of temperatures. PTFE has a high dielectric strength (600 volts/millimeter) which makes it a good insulator. PTFE is also very non-hydroscopic, or water resistant, absorbing less than 0.01% of its weight if exposed to water for a 24 hour period. PTFE has below average tensile strength, at 3000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Stainless Steel 18-8 Flat Washer, ANSI, #1, 0.084" ID, 0.219" OD, 0.025" Thick (Pack of 100)
• PTFE Sheet, White, 0.06" Thick, 6" Width, 6" Length
• Nylon 6/6 Hex Nut, 1/4"-20 (Pack of 100)
• Nylon 6/6 Threaded Rod, 5/16"-18, 72" Overall Length (Pack of 1)

Detail Reviews

May 27, 2011 14:04:03

Component Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1/4" Bolt Size, 0.281" ID, 0.625" OD, 0.188" Thick (Pack of 5)

Component Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1/4" Bolt Size, 0.281" ID, 0.625" OD, 0.188" Thick (Pack of 5) Reviews

Other Picture

Component Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1/4" Bolt Size, 0.281" ID, 0.625" OD, 0.188" Thick (Pack of 5) Feature

• Component Flat Washers are manufactured with thicker materials for extra strength and load distribution properties
• A stamped flatwasher originally used in the tool and die industry, and now used for its' extra thick design which has superior load distribution properties
• 18-8 Stainless Steel has a nice surface finish and is the most commonly used corrosion resistant material used
• Used for general MRO and industrial applications - excellent for marine environments
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. 18-8 Stainless Steel material offers excellent corrosion resistance, are harder than Brass, exhibit a slight magnetism, and are an attractive silver color.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

May 26, 2011 18:12:46