Stainless Steel 18-8 Flat Washer, ANSI, #6, 0.156" ID, 0.312" OD, 0.032" Thick (Pack of 25)

Stainless Steel 18-8 Flat Washer, ANSI, #6, 0.156" ID, 0.312" OD, 0.032" Thick (Pack of 25) Reviews

Other Picture

Stainless Steel 18-8 Flat Washer, ANSI, #6, 0.156" ID, 0.312" OD, 0.032" Thick (Pack of 25) Feature

• Flat Washers are an economical choice
• Stainless Steel is suitable where formability and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.

Visit Store Now !!

Detail Products

• Stainless Steel Hex Nut, #10-32 (Pack of 100)
• Stainless Steel 18-8 Split Lock Washer, DIN, M2, 2.1mm ID, 4.4mm OD, 0.5mm Thick (Pack of 100)
• Zinc Plated Steel Hex Nut, #2-56 (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #1-72, 5/16" Length (Pack of 100)
• Nylon 6/6 Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)

Detail Reviews

Oct 25, 2011 11:47:10

MIL-SPEC Flat Washer, Meets Spec MS15795, 18-8 Stainless Steel, Round Shape, USA Made, #4 Bolt Size , 0.125" ID, 0.250" OD, 0.017-0.028" Thick (Pack of 100)

MIL-SPEC Flat Washer, Meets Spec MS15795, 18-8 Stainless Steel, Round Shape, USA Made, #4 Bolt Size , 0.125" ID, 0.250" OD, 0.017-0.028" Thick (Pack of 100) Reviews

Other Picture

MIL-SPEC Flat Washer, Meets Spec MS15795, 18-8 Stainless Steel, Round Shape, USA Made, #4 Bolt Size , 0.125" ID, 0.250" OD, 0.017-0.028" Thick (Pack of 100) Feature

• Made in the USA to Military Specifications
• MS15795 series is one of the original general purpose flat washer military specification
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• The sizes listed in this specification cover most industrial and military uses
• Tight tolerances allow use in precision applications

The 3 most popular Military Specification Flat Washers that we offer are MS15795, AN960, NAS1149, and NAS620. These specifications were originally formulated by the Armed Forces of the USA to standardize fasteners being used on military equipment. Over time they have become a popular choice for designers in all industries and programs. All of these specs call out the same material - a 300 series Stainless with passivation. The differences are in the manufacturing tolerances, and the different dimension traits. the first choice should be the MS15795 series, which has the largest OD, and the largest hole diameters. Second choice should be the NAS1149 series. This has a smaller outer diameter, and a tight tolerance on the inner diameter as well as the thickness. AN960 offers an equal to the NAS1149 but with a larger tolerance on the thickness. NAS620 should be the last choice - this series has the smallest outer diameter, and the widest range of thickness tolerance.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Pan Head, Phillips Drive, MIL-SPEC, #8-32, 1-3/8" Length (Pack of 10)

Detail Reviews

Oct 24, 2011 15:21:04

5/16 Stainless Steel Flat Washer (100 count)

5/16 Stainless Steel Flat Washer (100 count) Reviews

Other Picture

5/16 Stainless Steel Flat Washer

Visit Store Now !!

Detail Products

Detail Reviews

Oct 10, 2011 14:29:13

Beveled FW Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1-1/8" Bolt Size, 1.156" ID, 2.250" OD, 0.313" Thick (Pack of 1)

Beveled FW Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1-1/8" Bolt Size, 1.156" ID, 2.250" OD, 0.313" Thick (Pack of 1) Reviews

Other Picture

Beveled FW Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1-1/8" Bolt Size, 1.156" ID, 2.250" OD, 0.313" Thick (Pack of 1) Feature

• Beveled Flat Washers are machined on Lathes, and feature a large bevel or chamfer on the top side
• The top bevel allows easier installation in tight spaces, and the part looks like a design feature of any product it is used on
• 18-8 Stainless Steel has a nice surface finish and is the most commonly used corrosion resistant material used
• Chemical, Marine, outdoor, power transmission are a few industries where these parts are used
• Made In USA for excellent quality conformance

Beveled Flat Washers (also known as "Williams Washers") are turned from solid bar, and feature a large bevel or chamfer on the top outside edge. Originally manufactured for the dual purpose of protecting assemblers from the sharp edges that are possible with a stamped washer, and also to allow them to orient the washer quickly, these washers have gained popularity for other purposes. Used in construction and architectural applications as an interesting visual part of the design, they offer the strength that is provided by their thickness. A small inner diameter provides a tight fit to bolts, rods, and studs, and eliminates most shifting and vibration of the washer. General industrial, marine, power transmission, and agricultural uses are popular.

Manufactured on Lathes from Type 303 Stainless Steel bar, this washer is 100% USA made. Available from #10 through 1-1/4" Bolt Size.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 24, 2011 03:10:05

Precision Shim Flat Washer for Bearing Outer Race Spacing, 18-8 Stainless Steel, Round Shape, USA Made, 0.088"-0.093" ID, 0.148"-0.153" OD, 0.010" Thick (Pack of 25)

Precision Shim Flat Washer for Bearing Outer Race Spacing, 18-8 Stainless Steel, Round Shape, USA Made, 0.088"-0.093" ID, 0.148"-0.153" OD, 0.010" Thick (Pack of 25) Reviews

Other Picture

Precision Shim Flat Washer for Bearing Outer Race Spacing, 18-8 Stainless Steel, Round Shape, USA Made, 0.088"-0.093" ID, 0.148"-0.153" OD, 0.010" Thick (Pack of 25) Feature

• Shim washers are manufactured with extremely tight thickness tolerances so they can be used to make up an exact dimension
• Designed to protect the outer race of a bearing, or for a special dimensioned flat washer
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• Precision machinery, technical instrumentation, prototypes, model makers, power transmission
• Made In USA for excellent quality conformance

These Shim Washers are also known as Bearing Outer Race Spacers, and Precision Shaft Spacing Shim Washers. A comprehensive line offering thicknesses from 0.003" up to 0.020" from stock. Sizes are keyed to industry standard bearings - 3/64 X 5/32", .055 X 3/16", 5/64 X 1/4", 1/8 X 1/4", 3/32 X 5/16", 1/8 X 5/16", 1/8 X 3/8", 3/16 X 3/8", 3/16 X 1/2", 1/4 X 1/2", 1/4 X 5/8", 3/8 X 7/8". Manufactured from full hard 300 series stainless for strength and corrosion resistance. 100% made in the USA of DFARS compliant steel.

Used originally to go between the outer race of a bearing and the component that it is attached to, they have evolved into a tight tolerance precision shim used in electronics, industrial, and power transmission applications. Precision stamped, and burr free.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 19, 2011 10:30:03

Precision Shim Flat Washer for Bearing Outer Race Spacing, 18-8 Stainless Steel, Round Shape, USA Made, 0.167"-0.172" ID, 0.243"-0.248" OD, 0.003" Thick (Pack of 25)

Precision Shim Flat Washer for Bearing Outer Race Spacing, 18-8 Stainless Steel, Round Shape, USA Made, 0.167"-0.172" ID, 0.243"-0.248" OD, 0.003" Thick (Pack of 25) Reviews

Other Picture

Precision Shim Flat Washer for Bearing Outer Race Spacing, 18-8 Stainless Steel, Round Shape, USA Made, 0.167"-0.172" ID, 0.243"-0.248" OD, 0.003" Thick (Pack of 25) Feature

• Shim washers are manufactured with extremely tight thickness tolerances so they can be used to make up an exact dimension
• Designed to protect the outer race of a bearing, or for a special dimensioned flat washer
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• Precision machinery, technical instrumentation, prototypes, model makers, power transmission
• Made In USA for excellent quality conformance

These Shim Washers are also known as Bearing Outer Race Spacers, and Precision Shaft Spacing Shim Washers. A comprehensive line offering thicknesses from 0.003" up to 0.020" from stock. Sizes are keyed to industry standard bearings - 3/64 X 5/32", .055 X 3/16", 5/64 X 1/4", 1/8 X 1/4", 3/32 X 5/16", 1/8 X 5/16", 1/8 X 3/8", 3/16 X 3/8", 3/16 X 1/2", 1/4 X 1/2", 1/4 X 5/8", 3/8 X 7/8". Manufactured from full hard 300 series stainless for strength and corrosion resistance. 100% made in the USA of DFARS compliant steel.

Used originally to go between the outer race of a bearing and the component that it is attached to, they have evolved into a tight tolerance precision shim used in electronics, industrial, and power transmission applications. Precision stamped, and burr free.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 15, 2011 18:50:03

Beveled FW Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1/2" Bolt Size, 0.531" ID, 1.000" OD, 0.188" Thick (Pack of 5)

Beveled FW Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1/2" Bolt Size, 0.531" ID, 1.000" OD, 0.188" Thick (Pack of 5) Reviews

Other Picture

Beveled FW Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1/2" Bolt Size, 0.531" ID, 1.000" OD, 0.188" Thick (Pack of 5) Feature

• Beveled Flat Washers are machined on Lathes, and feature a large bevel or chamfer on the top side
• The top bevel allows easier installation in tight spaces, and the part looks like a design feature of any product it is used on
• 18-8 Stainless Steel has a nice surface finish and is the most commonly used corrosion resistant material used
• Chemical, Marine, outdoor, power transmission are a few industries where these parts are used
• Made In USA for excellent quality conformance

Beveled Flat Washers (also known as "Williams Washers") are turned from solid bar, and feature a large bevel or chamfer on the top outside edge. Originally manufactured for the dual purpose of protecting assemblers from the sharp edges that are possible with a stamped washer, and also to allow them to orient the washer quickly, these washers have gained popularity for other purposes. Used in construction and architectural applications as an interesting visual part of the design, they offer the strength that is provided by their thickness. A small inner diameter provides a tight fit to bolts, rods, and studs, and eliminates most shifting and vibration of the washer. General industrial, marine, power transmission, and agricultural uses are popular.

Manufactured on Lathes from Type 303 Stainless Steel bar, this washer is 100% USA made. Available from #10 through 1-1/4" Bolt Size.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 12, 2011 00:43:04

MIL-SPEC Flat Washer, Meets Spec NAS620, 18-8 Stainless Steel, Round Shape, USA Made, #10 Bolt Size , 0.195" ID, 0.354" OD, 0.029-0.035" Thick (Pack of 100)

MIL-SPEC Flat Washer, Meets Spec NAS620, 18-8 Stainless Steel, Round Shape, USA Made, #10 Bolt Size , 0.195" ID, 0.354" OD, 0.029-0.035" Thick (Pack of 100) Reviews

Other Picture

MIL-SPEC Flat Washer, Meets Spec NAS620, 18-8 Stainless Steel, Round Shape, USA Made, #10 Bolt Size , 0.195" ID, 0.354" OD, 0.029-0.035" Thick (Pack of 100) Feature

• Made in the USA to Military Specifications
• NAS620 is one of the smaller pattern general use flat washers
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• The sizes listed in this specification cover most industrial and military uses
• Tight tolerances allow use in precision applications

The 3 most popular Military Specification Flat Washers that we offer are MS15795, AN960, NAS1149, and NAS620. These specifications were originally formulated by the Armed Forces of the USA to standardize fasteners being used on military equipment. Over time they have become a popular choice for designers in all industries and programs. All of these specs call out the same material - a 300 series Stainless with passivation. The differences are in the manufacturing tolerances, and the different dimension traits. the first choice should be the MS15795 series, which has the largest OD, and the largest hole diameters. Second choice should be the NAS1149 series. This has a smaller outer diameter, and a tight tolerance on the inner diameter as well as the thickness. AN960 offers an equal to the NAS1149 but with a larger tolerance on the thickness. NAS620 should be the last choice - this series has the smallest outer diameter, and the widest range of thickness tolerance.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 09, 2011 17:12:25

Component Flat Washer, 17-4PH Stainless Steel, Plain Finish, Round Shape, USA Made, 0.781" ID, 1.625" OD, 0.156" Thick (Pack of 1)

Component Flat Washer, 17-4PH Stainless Steel, Plain Finish, Round Shape, USA Made, 0.781" ID, 1.625" OD, 0.156" Thick (Pack of 1) Reviews

Other Picture

Component Flat Washer, 17-4PH Stainless Steel, Plain Finish, Round Shape, USA Made, 0.781" ID, 1.625" OD, 0.156" Thick (Pack of 1) Feature

• Component Flat Washers are manufactured with thicker materials for extra strength and load distribution properties
• The most popular sizes of extra strength steel washers in a corrosion resistant stainless steel, that is also Thru Hardened - parts are magnetic
• 17-4 Stainless Steel allows for Thru Hardening for extra strength - the carbon present in the stainless that allows for hardening does reduce the corrosion resistance
• Used anywhere a thick, strong, and corrosion resistant good looking washer is required
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. 17-4PH Stainless Steel material which is Thru Hardened offers excellent strength and hardness. They are magnetic, and are a dark mottled blue color.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 06, 2011 23:33:04

Component Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, #2 Bolt Size, 0.094" ID, 0.188" OD, 0.028" Thick (Pack of 25)

Component Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, #2 Bolt Size, 0.094" ID, 0.188" OD, 0.028" Thick (Pack of 25) Reviews

Other Picture

Component Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, #2 Bolt Size, 0.094" ID, 0.188" OD, 0.028" Thick (Pack of 25) Feature

• Component Flat Washers are manufactured with thicker materials for extra strength and load distribution properties
• The most popular sizes of extra strength steel washers in a corrosion resistant stainless steel
• 18-8 Stainless Steel is a good looking (bright and shiny) material with good surface finish and corrosion resistance
• Used anywhere a thick, strong, and corrosion resistant good looking washer is required
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. 18-8 Stainless Steel material offers excellent corrosion resistance, are harder than Brass, exhibit a slight magnetism, and are an attractive silver color.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Stainless Steel 316 Hex Bolt, 1/4"-20, 1-3/4" Length (Pack of 25)

Detail Reviews

Aug 28, 2011 00:28:04

Shoulder-Lengthening Shim Washer for Shoulder Screws, 18-8 Stainless Steel, Round Shape, USA Made, Fits 1/4" Shoulder and #10 Thread Diameter, 0.171" ID, 0.241" OD, 0.016" Thick (Pack of 50)

Shoulder-Lengthening Shim Washer for Shoulder Screws, 18-8 Stainless Steel, Round Shape, USA Made, Fits 1/4" Shoulder and #10 Thread Diameter, 0.171" ID, 0.241" OD, 0.016" Thick (Pack of 50) Reviews

Other Picture

Shoulder-Lengthening Shim Washer for Shoulder Screws, 18-8 Stainless Steel, Round Shape, USA Made, Fits 1/4" Shoulder and #10 Thread Diameter, 0.171" ID, 0.241" OD, 0.016" Thick (Pack of 50) Feature

• These Shim Washers are designed to be used on the threaded end of a Stripper or Shoulder Bolt to make the shoulder length extend further
• These Shims are manufactured in 3 different thicknesses to make up any dimension
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• Used to alter either shoulder or thread lengths on Stainless Steel Shoulder Bolts
• Made In USA for excellent quality conformance

These Shim Washers are designed to work with Socket Head Shoulder Bolts (also knowm as Stripper Bolts) to alter the length of the shoulder portion. Manufactured with the same outside diameter as the Shoulder Bolt shoulder, when added over the threads of the bolt, they serve to lengthen the shoulder portion of the bolt, while decreasing the threaded length. Available for Shoulder Bolts from 1/4" through 5/8" Shoulder diameters. For applications that require odd length shoulders to be used as pivot points or bearing surfaces, these Shim Lengthening Washers are great. Manufactured in the USA of 300 series stainless steel, Stamped and Burr Free.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 26, 2011 21:33:13

Stainless Steel 18-8 Flat Washer, ANSI, 1/2", 0.531" ID, 1.75" OD, 0.1" Thick (Pack of 100)

Stainless Steel 18-8 Flat Washer, ANSI, 1/2", 0.531" ID, 1.75" OD, 0.1" Thick (Pack of 100) Reviews

Other Picture

Stainless Steel 18-8 Flat Washer, ANSI, 1/2", 0.531" ID, 1.75" OD, 0.1" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Stainless Steel is suitable where formability and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.

Visit Store Now !!

Detail Products

• Stainless Steel Hex Nut, 1/4"-20 (Pack of 100)
• Stainless Steel 18-8 Split Lock Washer, ANSI, 5/16", 0.317" ID, 0.583" OD, 0.078" Thick (Pack of 100)
• Zinc Plated Steel Hex Nut, #2-56 (Pack of 100)
• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 5/8" Length (Pack of 100)

Detail Reviews

Aug 24, 2011 19:18:13

Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 9/16" ID, 1-1/4" OD, 0.062" Thick (Pack of 50)

Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 9/16" ID, 1-1/4" OD, 0.062" Thick (Pack of 50) Reviews

Other Picture

Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 9/16" ID, 1-1/4" OD, 0.062" Thick (Pack of 50) Feature

• Commercial standard flat washer for general industrial or MRO applications where corrosion resistance is needed
• Standard washer for use where corrosion resistance is desired
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• Used for general MRO and industrial applications needing corrosion resistance
• Made In USA for excellent quality conformance

A standard general purpose flat washer manufactured in both 18-8 and Type 316 Stainless Steels, entirely in the USA of DFARS compoant steels. Available from stock in bolt sizes #4 all the way up to 1-1/2". Manufactured from standard gage thicknesses, these washers are good for general industrial, MRO, and anywhere extra strength is not needed.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 21, 2011 16:03:04