Component Flat Washer, Brass, Round Shape, USA Made, 1" Bolt Size, 1.031" ID, 2.000" OD, 0.188" Thick (Pack of 1)

Component Flat Washer, Brass, Round Shape, USA Made, 1" Bolt Size, 1.031" ID, 2.000" OD, 0.188" Thick (Pack of 1) Reviews

Other Picture

Component Flat Washer, Brass, Round Shape, USA Made, 1" Bolt Size, 1.031" ID, 2.000" OD, 0.188" Thick (Pack of 1) Feature

• An extra thick flat washer that comes in steel, 18-8 and 316 Stainless, and Brass
• A stamped flatwasher originally used in the tool and die industry, and now used for its' extra thick design which has superior load distribution properties
• Brass is a soft material that offers excellent corrosion resistance, especially in marine environments, and are not magnetic
• Used for general MRO and industrial applications - excellent for marine environments
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. Brass material offers excellent corrosion resistance, are non magnetic, soft, and are an attractive gold color.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Brass C260 Seamless Round Tubing, 3/8" OD,0.317"ID, 0.029" Wall, 12" Length
• Advanced Tool Design Model ATD-359 110 Piece Copper Washer Assortment
• Dremel 512E EZ Lock Fine Grit Finishing Abrasive Buffs, 2-Pack
• SE Pick Set, 12Pc
• SE Diamond Wheel Set 6PC DW13 1/8" Shank

Detail Reviews

Sep 28, 2011 12:25:04

Spherical Flat Washer, Complete Set, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 1.063" ID, 2.000" OD, 0.330" Thick (Pack of 1)

Spherical Flat Washer, Complete Set, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 1.063" ID, 2.000" OD, 0.330" Thick (Pack of 1) Reviews

Other Picture

Spherical Flat Washer, Complete Set, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 1.063" ID, 2.000" OD, 0.330" Thick (Pack of 1) Feature

• A male and female mating set that is self adjusting to align slightly mismatched components
• Male and Female halves are machined for a matched set
• Low Carbon Steel, Case Hardened, Black Oxide Plated
• Machinery, MRO, Power Generation, Transportation, Leveling
• Made In USA for excellent quality conformance

Spherical Washer Sets allow the top and bottom halves to adjust to compensate for uneven or mismatched surfaces, achieving a flat bolting surface. A set consists of a female half (concave) where the washer is hollowed out or curved inward, while the male portion is convex (bulging outwards). These two halves match for a perfect set. The thickness of the set is calculated by putting both halves together and measuring the overall thickness. Both halves are machined and turned on our machines from 12L14 Low Carbon Steel. Parts are then case hardened, which hardens only the top layer of steel, leaving the center soft - this imparts strength on the bearing surface, but allows the part itself to flex, and avoid cracking from being too brittle. A Black Oxide plating is then applied, for appearance and a corrosion inhibitor. Made in the USA.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 25, 2011 15:32:03

Extra-Thick Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 0.344" ID, 2.000" OD, 0.250" Thick (Pack of 1)

Extra-Thick Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 0.344" ID, 2.000" OD, 0.250" Thick (Pack of 1) Reviews

Other Picture

Extra-Thick Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 0.344" ID, 2.000" OD, 0.250" Thick (Pack of 1) Feature

• Fender Flat Washers have extra large outside diameters in relation to their bolt size
• Extra large Outside Diameter spreads the load over a wider area, and the extra thickness of these washers provide extra strength as well
• A stamped product from low carbon steel, soft, and zinc plated for corrosion resistance
• A versatile washer used anywhere that a large bearing surface and thickness are needed
• Made In USA for excellent quality conformance

Fender Flatwashers were named because of their original use in auto body repair. The large outer diameter covered up a lot of area, and also spread the load across a wide area of thin sheet metal. In todays world these washers are used in electrical, construction, HVAC, and general industrial applications. The purpose of a washer is to spread the load from the head of the bolt across a wider area than the bolt head, which increases the strength of the joint. Fender washers do this well because the outer diameter is so much larger than the diameter of a standard flat washer. These extra thick Fender washers are manufactured in Steel Zinc, 18-8 Stainless Steel, and Type 316 Stainless Steel. The increased thickness provides superior strength, as the thicker the washer, the stronger it gets.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 18, 2011 17:29:04

Structural Flat Washer, Steel, Yellow Zinc Plated, Round Shape, USA Made, 1.063" ID, 2.000" OD, 0.250" Thick (Pack of 10)

Structural Flat Washer, Steel, Yellow Zinc Plated, Round Shape, USA Made, 1.063" ID, 2.000" OD, 0.250" Thick (Pack of 10) Reviews

Other Picture

Structural Flat Washer, Steel, Yellow Zinc Plated, Round Shape, USA Made, 1.063" ID, 2.000" OD, 0.250" Thick (Pack of 10) Feature

• SAE Pattern washers, but twice as thick for extra strength
• Each stamped washer has the bolt size on the top side of the washer for easy identification in the field
• Stamped from Medium Carbon Steel, Thru Hard to Rockwell C43-C49, and then Zinc Yellow Plated for corrosion resistance
• Construction, Power generation, Machinery, Transportation
• Made In USA for excellent quality conformance

Structural Washers are our extra thick and extra thick washer designed for use with Grade 5, Grade 8, Structural bolting, and Socket products. Based on the standard SAE Pattern flatwasher, but extra thick, and stamped from Medium Carbon Steel, thru hardened to Rockwell Rc C43-C49, and Zinc Yellow Plated (RoHs compliant) for strength and corrosion resistance. Each washer has the bolt size on the top of the washer, and "USA" to signify that we manufacture this 100% in the USA from DFARS compliant material. Used in transportation industries, construction and MRO, power generation, mining, and general industrial applications. The perfect washer for a joint requiring extra strength and dependability. These washers are even thicker than the structural F436 specification that is generally used for structural bolting applications.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 10, 2011 02:18:04

Square Flat Washer, Case Hardened Steel, Black Oxide, Square Shape, USA Made, 0.313" ID, 2.000" OD, 0.250" Thick (Pack of 5)

Square Flat Washer, Case Hardened Steel, Black Oxide, Square Shape, USA Made, 0.313" ID, 2.000" OD, 0.250" Thick (Pack of 5) Reviews

Other Picture

Square Flat Washer, Case Hardened Steel, Black Oxide, Square Shape, USA Made, 0.313" ID, 2.000" OD, 0.250" Thick (Pack of 5) Feature

• Square Washers are manufactured with a generous Inner Diameter to allow for the rought tolerances usually found in the construction trades
• This series of Square Washes comes in a range of 2", 3", and 4" Square, and different materials
• Low Carbon Steel, Case Hardened and Black Oxide Plated
• Construction, Power generation, Machinery, Transportation
• Made In USA for excellent quality conformance

Square Washers are most often used in construction where building codes specify them as a structural component of framing and other subsystems, or in channels or square tubing. The square shape prvents them from rotating in the channel. Our square washers are manufactured with extra thick steel and stainless steel. Inner diameters are cut large to allow for hot dip galvanized bolts to fit through easily, and to also provide adjustment and alignment. 2, 2-1/4", 3" and 4" Square are all in stock, and manufactured in the USA. Plain Steel Square Washers are suitable for any use where corrosion resistance is not required, and these washers are soft steel. Case Hardened Steel Square Washers provide extra strength because they are hardened, and then Black Oxide Plated for both appearance and they do add a slight corrosion inhibition. Diamond Square Washers are manufactured from the diamond plate tread steel. By facing the diamondplate into the joint, they dig into soft materials and help anchor the washer in place. Soft Steel Hot Dip Galvanized offer the best corrosion resistance in our steel line. All Made in the USA.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 06, 2011 02:20:03

Square Flat Washer, 18-8 Stainless Steel, Square Shape, USA Made, 7/8" Bolt Size, 0.938" ID, 2.000" OD, 0.250" Thick (Pack of 1)

Square Flat Washer, 18-8 Stainless Steel, Square Shape, USA Made, 7/8" Bolt Size, 0.938" ID, 2.000" OD, 0.250" Thick (Pack of 1) Reviews

Other Picture

Square Flat Washer, 18-8 Stainless Steel, Square Shape, USA Made, 7/8" Bolt Size, 0.938" ID, 2.000" OD, 0.250" Thick (Pack of 1) Feature

• Square Flat Washers are used as shims in construction applications, as well as in industrial and commercial products
• Inner diameter is oversized by 1/16" to allow for maximum flexibility
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• Construction, Power Transmission, Power Generation, Mining, and MRO applications are all covered with these Square Washers
• Made In USA for excellent quality conformance

Square Washers are most often used in construction where building codes specify them as a structural component of framing and other subsystems, or in channels or square tubing. The square shape prvents them from rotating in the channel. Our square washers are manufactured with extra thick steel and stainless steel. Inner diameters are cut large to allow for hot dip galvanized bolts to fit through easily, and to also provide adjustment and alignment. 2" Square is the most popular size, and our .250" thick Stainless Steel provides extra strength and load carrying capability, with outstanding corrosion resistance. Made in the USA.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 01, 2011 21:35:06

Square Flat Washer, Steel Diamond Tread Plate, Galvanized, Square Shape, USA Made, 0.313" ID, 2.000" OD, 0.250" Thick (Pack of 5)

Square Flat Washer, Steel Diamond Tread Plate, Galvanized, Square Shape, USA Made, 0.313" ID, 2.000" OD, 0.250" Thick (Pack of 5) Reviews

Other Picture

Square Flat Washer, Steel Diamond Tread Plate, Galvanized, Square Shape, USA Made, 0.313" ID, 2.000" OD, 0.250" Thick (Pack of 5) Feature

• Square Washers are manufactured with a generous Inner Diameter to allow for the rought tolerances usually found in the construction trades
• This series of Square Washes comes in a range of 2", 3", and 4" Square, and different materials
• Diamondplate Low Carbon Steel and Galvanized for extra corrosion resistance
• Construction, Power generation, Machinery, Transportation
• Made In USA for excellent quality conformance

Square Washers are most often used in construction where building codes specify them as a structural component of framing and other subsystems, or in channels or square tubing. The square shape prvents them from rotating in the channel. Our square washers are manufactured with extra thick steel and stainless steel. Inner diameters are cut large to allow for hot dip galvanized bolts to fit through easily, and to also provide adjustment and alignment. 2, 2-1/4", 3" and 4" Square are all in stock, and manufactured in the USA. Plain Steel Square Washers are suitable for any use where corrosion resistance is not required, and these washers are soft steel. Case Hardened Steel Square Washers provide extra strength because they are hardened, and then Black Oxide Plated for both appearance and they do add a slight corrosion inhibition. Diamond Square Washers are manufactured from the diamond plate tread steel. By facing the diamondplate into the joint, they dig into soft materials and help anchor the washer in place. Soft Steel Hot Dip Galvanized offer the best corrosion resistance in our steel line. All Made in the USA.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 18, 2011 21:03:04

Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.406" ID, 2.000" OD, 0.125" Thick (Pack of 5)

Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.406" ID, 2.000" OD, 0.125" Thick (Pack of 5) Reviews

Other Picture

Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.406" ID, 2.000" OD, 0.125" Thick (Pack of 5) Feature

• Fender Flat Washers have extra large outside diameters in relation to their bolt size
• Extra large Outside Diameter spreads the load over a wider area, and the extra thickness of these washers provide extra strength as well
• A stamped product from low carbon steel, soft, and zinc plated for corrosion resistance
• A versatile washer used anywhere that a large bearing surface and thickness are needed
• Made In USA for excellent quality conformance

Fender Flatwashers were named because of their original use in auto body repair. The large outer diameter covered up a lot of area, and also spread the load across a wide area of thin sheet metal. In todays world these washers are used in electrical, construction, HVAC, and general industrial applications. The purpose of a washer is to spread the load from the head of the bolt across a wider area than the bolt head, which increases the strength of the joint. Fender washers do this well because the outer diameter is so much larger than the diameter of a standard flat washer. These extra thick Fender washers are manufactured in Steel Zinc, 18-8 Stainless Steel, and Type 316 Stainless Steel. The increased thickness provides superior strength, as the thicker the washer, the stronger it gets.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

May 18, 2011 19:39:04

Extra-Thick Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 0.344" ID, 2.000" OD, 0.125" Thick (Pack of 1)

Extra-Thick Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 0.344" ID, 2.000" OD, 0.125" Thick (Pack of 1) Reviews

Other Picture

Extra-Thick Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 0.344" ID, 2.000" OD, 0.125" Thick (Pack of 1) Feature

• Fender Flat Washers have extra large outside diameters in relation to their bolt size
• Extra large Outside Diameter spreads the load over a wider area, and the extra thickness of these washers provide extra strength as well
• A stamped product from low carbon steel, soft, and zinc plated for corrosion resistance
• A versatile washer used anywhere that a large bearing surface and thickness are needed
• Made In USA for excellent quality conformance

Fender Flatwashers were named because of their original use in auto body repair. The large outer diameter covered up a lot of area, and also spread the load across a wide area of thin sheet metal. In todays world these washers are used in electrical, construction, HVAC, and general industrial applications. The purpose of a washer is to spread the load from the head of the bolt across a wider area than the bolt head, which increases the strength of the joint. Fender washers do this well because the outer diameter is so much larger than the diameter of a standard flat washer. These extra thick Fender washers are manufactured in Steel Zinc, 18-8 Stainless Steel, and Type 316 Stainless Steel. The increased thickness provides superior strength, as the thicker the washer, the stronger it gets.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

May 09, 2011 00:29:04

Non-Metallic Flat Washer, Fiberglass, Square Shape, USA Made, 3/8" Bolt Size, 0.390" ID, 2.000" OD, 0.125" Thick (Pack of 20)

Non-Metallic Flat Washer, Fiberglass, Square Shape, USA Made, 3/8" Bolt Size, 0.390" ID, 2.000" OD, 0.125" Thick (Pack of 20) Reviews

Other Picture

Non-Metallic Flat Washer, Fiberglass, Square Shape, USA Made, 3/8" Bolt Size, 0.390" ID, 2.000" OD, 0.125" Thick (Pack of 20) Feature

• Insulating Washers of Fiberglass protect components from heat and electricity, and are chemically resistant
• These washers are thicker compared to their outer diameter than usual, for greater strength and insulation
• Polyster Glass Laminates (Fiberglass) come in light tan and green colors
• This Fiberglass material meets General Purpose NEMA (National Electrical Manufacturers Association) GPO-1 Standards
• Made In USA for excellent quality conformance

Fiberglass washers are insulators of both thermal and electrical energy. They are chemically resistant, and have a high strength to weight ratio. This series of Square Washers is available from stock in bolt sizes 1/4" thru 1". Square shaped washers are often used in channel applications.

Polyster Glass Laminates (Fiberglass) come in light tan and green colors, this material meets General Purpose NEMA (National Electrical Manufacturers Association) GPO-1 Standards. Can withstand temperatures up to aprox 200 degrees and still function.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

May 04, 2011 10:38:04

Square Flat Washer, 18-8 Stainless Steel, Square Shape, USA Made, 1/4" Bolt Size, 0.313" ID, 2.000" OD, 0.250" Thick (Pack of 5)

Square Flat Washer, 18-8 Stainless Steel, Square Shape, USA Made, 1/4" Bolt Size, 0.313" ID, 2.000" OD, 0.250" Thick (Pack of 5) Reviews

Other Picture

Square Flat Washer, 18-8 Stainless Steel, Square Shape, USA Made, 1/4" Bolt Size, 0.313" ID, 2.000" OD, 0.250" Thick (Pack of 5) Feature

• Square Flat Washers are used as shims in construction applications, as well as in industrial and commercial products
• Inner diameter is oversized by 1/16" to allow for maximum flexibility
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• Construction, Power Transmission, Power Generation, Mining, and MRO applications are all covered with these Square Washers
• Made In USA for excellent quality conformance

Square Washers are most often used in construction where building codes specify them as a structural component of framing and other subsystems, or in channels or square tubing. The square shape prvents them from rotating in the channel. Our square washers are manufactured with extra thick steel and stainless steel. Inner diameters are cut large to allow for hot dip galvanized bolts to fit through easily, and to also provide adjustment and alignment. 2" Square is the most popular size, and our .250" thick Stainless Steel provides extra strength and load carrying capability, with outstanding corrosion resistance. Made in the USA.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 12, 2011 18:52:04