Hard Fiber Flat Washer, 5/16", 0.344" ID, 0.875" OD, 0.063" Thick (Pack of 100)

Hard Fiber Flat Washer, 5/16", 0.344" ID, 0.875" OD, 0.063" Thick (Pack of 100) Reviews

Other Picture

Hard Fiber Flat Washer, 5/16", 0.344" ID, 0.875" OD, 0.063" Thick (Pack of 100) Feature

• Flat Washers are an economical choice^Hard Vulcanized Fiber is suitable for insulation or light duty sealing jobs^Hard Fiber Washers resist compression and help maintain appropriate spacing between materials or parts^Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

This commercial grade vulcanized fiber material performs with continuous heat resistance to 212 degrees Fahrenheit under no load conditions.

Visit Store Now !!

Detail Products

• Nylon 6/6 Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #5-40, 1/4" Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.140" ID, 0.187" OD, 0.035" Thick, 0.312" Shoulder Diameter, 0.062" Length (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, MIL-SPEC, 1/4"-20, 2" Length (Pack of 100)

Detail Reviews

Sep 20, 2011 06:01:07

Nylon 6/6 Flat Washer, 5/16", 0.34" ID, 0.875" OD, 0.125" Thick (Pack of 100)

Nylon 6/6 Flat Washer, 5/16", 0.34" ID, 0.875" OD, 0.125" Thick (Pack of 100) Reviews

Other Picture

Nylon 6/6 Flat Washer, 5/16", 0.34" ID, 0.875" OD, 0.125" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Nylon 6/6 Hex Nut, #4-40 (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.200" ID, 0.281" OD, 0.050" Thick, 0.422" Shoulder Diameter, 0.21" Length (Pack of 100)
• Nylon 6/6 Hex Bolt, #10-32, 1/4" Length (Pack of 50)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 7/8" Length (Pack of 100)

Detail Reviews

Aug 23, 2011 20:36:04

Stainless Steel 18-8 Flat Washer, 5/16", 0.343" ID, 0.75" OD, 0.05" Thick (Pack of 100)

Stainless Steel 18-8 Flat Washer, 5/16", 0.343" ID, 0.75" OD, 0.05" Thick (Pack of 100) Reviews

Other Picture

Stainless Steel 18-8 Flat Washer, 5/16", 0.343" ID, 0.75" OD, 0.05" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Stainless Steel is suitable where formability and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.

Visit Store Now !!

Detail Products

• Stainless Steel Hex Nut, 1/4"-28 (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 1/2" Length (Pack of 100)
• Stainless Steel 18-8 Flat Washer, ANSI, #5, 0.141" ID, 0.5" OD, 0.04" Thick (Pack of 100)
• Stainless Steel 18-8 Split Lock Washer, DIN, M4, 4.1mm ID, 7.6mm OD, 0.9mm Thick (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, 1/4"-20, 1-3/8" Length (Pack of 100)

Detail Reviews

Jul 26, 2011 10:07:25

Nylon Flat Washer, 5/16", 0.317" ID, 0.5" OD, 0.062" Thick (Pack of 100)

Nylon Flat Washer, 5/16", 0.317" ID, 0.5" OD, 0.062" Thick (Pack of 100) Reviews

Other Picture

Nylon Flat Washer, 5/16", 0.317" ID, 0.5" OD, 0.062" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• 5mm Metric Flat Washer (100 count)
• Nylon Hex Nut, #4-40 (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Stainless Steel Machine Screw, Black Oxide Finish, Pan Head, Phillips Drive, #6-32, 3/4" Length (Pack of 10)

Detail Reviews

Feb 28, 2011 23:08:03

Felt Flat Washer, ANSI, 5/16", 0.344" ID, 0.875" OD, 0.187" Thick (Pack of 100)

Felt Flat Washer, ANSI, 5/16", 0.344" ID, 0.875" OD, 0.187" Thick (Pack of 100) Reviews

Other Picture

Felt Flat Washer, ANSI, 5/16", 0.344" ID, 0.875" OD, 0.187" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Felt is good for sound reduction, vibration deadening, thermal insulation
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Felt is recommended for applications requiring sound reduction or vibration deadening due to its absorption capacity. It also works well as a thermal insulator, to separate materials without marring, or it can be soaked with oil for use in applications requiring lubrication.

Visit Store Now !!

Detail Products

Detail Reviews

Feb 26, 2011 06:54:04