Hard Fiber Flat Washer, 5/16", 0.344" ID, 0.875" OD, 0.063" Thick (Pack of 100)

Hard Fiber Flat Washer, 5/16", 0.344" ID, 0.875" OD, 0.063" Thick (Pack of 100) Reviews

Other Picture

Hard Fiber Flat Washer, 5/16", 0.344" ID, 0.875" OD, 0.063" Thick (Pack of 100) Feature

• Flat Washers are an economical choice^Hard Vulcanized Fiber is suitable for insulation or light duty sealing jobs^Hard Fiber Washers resist compression and help maintain appropriate spacing between materials or parts^Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

This commercial grade vulcanized fiber material performs with continuous heat resistance to 212 degrees Fahrenheit under no load conditions.

Visit Store Now !!

Detail Products

• Nylon 6/6 Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #5-40, 1/4" Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.140" ID, 0.187" OD, 0.035" Thick, 0.312" Shoulder Diameter, 0.062" Length (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, MIL-SPEC, 1/4"-20, 2" Length (Pack of 100)

Detail Reviews

Sep 20, 2011 06:01:07

Nylon 6/6 Flat Washer, 5/16", 0.34" ID, 0.875" OD, 0.125" Thick (Pack of 100)

Nylon 6/6 Flat Washer, 5/16", 0.34" ID, 0.875" OD, 0.125" Thick (Pack of 100) Reviews

Other Picture

Nylon 6/6 Flat Washer, 5/16", 0.34" ID, 0.875" OD, 0.125" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Nylon 6/6 Hex Nut, #4-40 (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.200" ID, 0.281" OD, 0.050" Thick, 0.422" Shoulder Diameter, 0.21" Length (Pack of 100)
• Nylon 6/6 Hex Bolt, #10-32, 1/4" Length (Pack of 50)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 7/8" Length (Pack of 100)

Detail Reviews

Aug 23, 2011 20:36:04

Plain Flat Washer, IFI Type B, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.469" ID, 0.875" OD, 0.056-0.071" Thick (Pack of 10)

Plain Flat Washer, IFI Type B, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.469" ID, 0.875" OD, 0.056-0.071" Thick (Pack of 10) Reviews

Other Picture

Plain Flat Washer, IFI Type B, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.469" ID, 0.875" OD, 0.056-0.071" Thick (Pack of 10) Feature

• Type B Flat Washers are manufactured to the IFI Standards (Industrial Fastener Institute) and are used in general industrial applications
• Type B washers are specified in many industrial and appliance applications
• Stamped from low carbon steel, and commercial zinc plated - RoHs compliant
• Industrial, Appliance, MRO, general applications
• Made In USA for excellent quality conformance

Type B Flat Washers are manufactured to the Industrial Fastener Institute Type B specification. Originating in 1965 ASME B18.22.1 established a categoruy of Tyoe A and Type B Flat Washer dimensions. The Type B are available in narrow, regular, and wide series, with proportions designed for distributing load over larger areas of low strength materials. Available from stock in screw sizes from #0 through 1/2" bolt sizes. Manufactured of Low Carbon Steel, with a protective silver Zinc plating (RoHs compliant).

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 25, 2011 13:47:04

Component Flat Washer, Brass, Round Shape, USA Made, 3/8" Bolt Size, 0.406" ID, 0.875" OD, 0.125" Thick (Pack of 10)

Component Flat Washer, Brass, Round Shape, USA Made, 3/8" Bolt Size, 0.406" ID, 0.875" OD, 0.125" Thick (Pack of 10) Reviews

Other Picture

Component Flat Washer, Brass, Round Shape, USA Made, 3/8" Bolt Size, 0.406" ID, 0.875" OD, 0.125" Thick (Pack of 10) Feature

• An extra thick flat washer that comes in steel, 18-8 and 316 Stainless, and Brass
• A stamped flatwasher originally used in the tool and die industry, and now used for its' extra thick design which has superior load distribution properties
• Brass is a soft material that offers excellent corrosion resistance, especially in marine environments, and are not magnetic
• Used for general MRO and industrial applications - excellent for marine environments
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. Brass material offers excellent corrosion resistance, are non magnetic, soft, and are an attractive gold color.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Advanced Tool Design Model ATD-359 110 Piece Copper Washer Assortment
• Dremel 512E EZ Lock Fine Grit Finishing Abrasive Buffs, 2-Pack

Detail Reviews

Jun 27, 2011 20:26:04

Felt Flat Washer, ANSI, 5/16", 0.344" ID, 0.875" OD, 0.187" Thick (Pack of 100)

Felt Flat Washer, ANSI, 5/16", 0.344" ID, 0.875" OD, 0.187" Thick (Pack of 100) Reviews

Other Picture

Felt Flat Washer, ANSI, 5/16", 0.344" ID, 0.875" OD, 0.187" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Felt is good for sound reduction, vibration deadening, thermal insulation
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Felt is recommended for applications requiring sound reduction or vibration deadening due to its absorption capacity. It also works well as a thermal insulator, to separate materials without marring, or it can be soaked with oil for use in applications requiring lubrication.

Visit Store Now !!

Detail Products

Detail Reviews

Feb 26, 2011 06:54:04