Machined Flat Washer with Beveled Outside Edge, Case Hardened Steel, Plain Finish, Round Shape, USA Made, 1.156" ID, 2.250" OD, 0.313" Thick (Pack of 2)

Machined Flat Washer with Beveled Outside Edge, Case Hardened Steel, Plain Finish, Round Shape, USA Made, 1.156" ID, 2.250" OD, 0.313" Thick (Pack of 2) Reviews

Other Picture

Machined Flat Washer with Beveled Outside Edge, Case Hardened Steel, Plain Finish, Round Shape, USA Made, 1.156" ID, 2.250" OD, 0.313" Thick (Pack of 2) Feature

• Beveled Flat Washers are machined on Lathes, and feature a large bevel or chamfer on the top side
• Originally called "Williams Washers" the large beveled edge on the top of the washer assists operators in assembling products in mass quantities
• 12L14 Low Carbon Steel is machined, then case hardened, and left plain
• Used in many general industrial applications where corrosion resistance is not needed
• Made In USA for excellent quality conformance

Beveled Flat Washers (also known as "Williams Washers") are turned from solid bar, and feature a large bevel or chamfer on the top outside edge. Originally manufactured for the dual purpose of protecting assemblers from the sharp edges that are possible with a stamped washer, and also to allow them to orient the washer quickly, these washers have gained popularity for other purposes. Used in construction and architectural applications as an interesting visual part of the design, they offer the strength that is provided by their thickness. A small inner diameter provides a tight fit to bolts, rods, and studs, and eliminates most shifting and vibration of the washer. General industrial, marine, power transmission, and agricultural uses are popular.

Manufactured on Lathes from 12L14 Low Carbon Steel, and then case hardened for extra strength, then left plain. Useful for welding this washer to other components, or using it in another manufacturing process. 100% USA made. Available from #10 through 1-1/4" Bolt Size.

Visit Store Now !!

Detail Products

Detail Reviews

Oct 11, 2011 14:56:17

Component Flat Washer, 17-4PH Stainless Steel, Plain Finish, Round Shape, USA Made, 0.781" ID, 1.625" OD, 0.156" Thick (Pack of 1)

Component Flat Washer, 17-4PH Stainless Steel, Plain Finish, Round Shape, USA Made, 0.781" ID, 1.625" OD, 0.156" Thick (Pack of 1) Reviews

Other Picture

Component Flat Washer, 17-4PH Stainless Steel, Plain Finish, Round Shape, USA Made, 0.781" ID, 1.625" OD, 0.156" Thick (Pack of 1) Feature

• Component Flat Washers are manufactured with thicker materials for extra strength and load distribution properties
• The most popular sizes of extra strength steel washers in a corrosion resistant stainless steel, that is also Thru Hardened - parts are magnetic
• 17-4 Stainless Steel allows for Thru Hardening for extra strength - the carbon present in the stainless that allows for hardening does reduce the corrosion resistance
• Used anywhere a thick, strong, and corrosion resistant good looking washer is required
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. 17-4PH Stainless Steel material which is Thru Hardened offers excellent strength and hardness. They are magnetic, and are a dark mottled blue color.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 06, 2011 23:33:04

Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 9/16" ID, 1-1/4" OD, 0.062" Thick (Pack of 50)

Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 9/16" ID, 1-1/4" OD, 0.062" Thick (Pack of 50) Reviews

Other Picture

Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 9/16" ID, 1-1/4" OD, 0.062" Thick (Pack of 50) Feature

• Commercial standard flat washer for general industrial or MRO applications where corrosion resistance is needed
• Standard washer for use where corrosion resistance is desired
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• Used for general MRO and industrial applications needing corrosion resistance
• Made In USA for excellent quality conformance

A standard general purpose flat washer manufactured in both 18-8 and Type 316 Stainless Steels, entirely in the USA of DFARS compoant steels. Available from stock in bolt sizes #4 all the way up to 1-1/2". Manufactured from standard gage thicknesses, these washers are good for general industrial, MRO, and anywhere extra strength is not needed.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

Aug 21, 2011 16:03:04

Jumbo Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 1-1/2" Bolt Size, 1.625" ID, 3.000" OD, 0.125" Thick (Pack of 1)

Jumbo Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 1-1/2" Bolt Size, 1.625" ID, 3.000" OD, 0.125" Thick (Pack of 1) Reviews

Other Picture

Jumbo Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 1-1/2" Bolt Size, 1.625" ID, 3.000" OD, 0.125" Thick (Pack of 1) Feature

• Jumbo Washers are designed for extra large bolting up to 4" diameter
• A machined washer that is extra big, extra strong, and extra fine
• 303/304 Stainless Steel has excellent corrosion resistance
• Construction, Power generation, Machinery, Transportation
• Made In USA for excellent quality conformance

Jumbo Flat Washers are designed for large bolts - available from stock in both a 4140 Alloy Steel and 18-8 Stainless Steel from 1-3/8" Bolt Szie all the way up to 4" Bolts. Inner Diameter is manufactured 1/8" larger than the bolt to allow for slight alignment issues, and to accomodate a thicker hot dip galvanized bolt shank. Extra large outer diameters and thickness up to 5/16" provide extra bearing surface and extra strength. 4140 Alloy Steels are fully through hardened to Rockwell C40-C50, and finished with a Black Oxide plating. This provides a suitable washer for Grade 5 or Grade 8 bolts, and some Structural Bolting applications. 100% Made in USA, with DFARS compliant raw materials. (Certification available at extra cost, and on special order only). 300 Series Stainless Steels are also DFARS compliant (Certification also available at extra cost, and for special orders only).

Visit Store Now !!

Detail Products

Detail Reviews

Aug 20, 2011 20:56:07

Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 3/8" Bolt Size, 0.406" ID, 1.500" OD, 0.052-0.072" Thick (Pack of 5)

Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 3/8" Bolt Size, 0.406" ID, 1.500" OD, 0.052-0.072" Thick (Pack of 5) Reviews

Other Picture

Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 3/8" Bolt Size, 0.406" ID, 1.500" OD, 0.052-0.072" Thick (Pack of 5) Feature

• Fender Flat Washers have extra large outside diameters in relation to their bolt size
• Extra large Outside Diameter spreads the load over a wider area
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• Great for homeowner repairs, general MRO applications

Fender Flatwashers were named because of their original use in auto body repair. The large outer diameter covered up a lot of area, and also spread the load across a wide area of thin sheet metal. In todays world these washers are used in electrical, construction, HVAC, and general industrial applications. The purpose of a washer is to spread the load from the head of the bolt across a wider area than the bolt head, which increases the strength of the joint. Fender washers do this well because the outer diameter is so much larger than the diameter of a standard flat washer. These standard (thin) Fender washers are manufactured in Steel Zinc, 18-8 Stainless Steel, and Type 316 Stainless Steel.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Sanyo Eneloop 8 Pack AA NiMH Pre-Charged Rechargeable Batteries

Detail Reviews

Aug 13, 2011 06:29:04

Spacing Flat Washer, Steel, Plain Finish, Round Shape, USA Made, 0.656" ID, 1.250" OD, 0.250" Thick (Pack of 10)

Spacing Flat Washer, Steel, Plain Finish, Round Shape, USA Made, 0.656" ID, 1.250" OD, 0.250" Thick (Pack of 10) Reviews

Other Picture

Spacing Flat Washer, Steel, Plain Finish, Round Shape, USA Made, 0.656" ID, 1.250" OD, 0.250" Thick (Pack of 10) Feature

• Stamped Flat Washer made to the same dimensions as our Beveled machined washers
• A larger and stronger plain steel flat washer
• Low Carbon Steel, soft and plain
• Used in many general applications for industry, machinery, and mechanical
• Made In USA for excellent quality conformance

A general use thick spacing washer - running from 3/32 thru 5/16" thick, stamped from low carbon steel, soft and plain finish. Bolt sizes from #10 thru 1-1/4". Made in the USA.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 29, 2011 10:27:03

Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 3/8" Bolt Size, 0.406" ID, 1.625" OD, 0.056-0.070" Thick (Pack of 5)

Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 3/8" Bolt Size, 0.406" ID, 1.625" OD, 0.056-0.070" Thick (Pack of 5) Reviews

Other Picture

Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 3/8" Bolt Size, 0.406" ID, 1.625" OD, 0.056-0.070" Thick (Pack of 5) Feature

• Fender Flat Washers have extra large outside diameters in relation to their bolt size
• Extra large Outside Diameter spreads the load over a wider area
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• Great for homeowner repairs, general MRO applications

Fender Flatwashers were named because of their original use in auto body repair. The large outer diameter covered up a lot of area, and also spread the load across a wide area of thin sheet metal. In todays world these washers are used in electrical, construction, HVAC, and general industrial applications. The purpose of a washer is to spread the load from the head of the bolt across a wider area than the bolt head, which increases the strength of the joint. Fender washers do this well because the outer diameter is so much larger than the diameter of a standard flat washer. These standard (thin) Fender washers are manufactured in Steel Zinc, 18-8 Stainless Steel, and Type 316 Stainless Steel.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Sanyo Eneloop 8 Pack AA NiMH Pre-Charged Rechargeable Batteries

Detail Reviews

Jul 24, 2011 03:13:03

Extra-Thick Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 0.344" ID, 2.000" OD, 0.250" Thick (Pack of 1)

Extra-Thick Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 0.344" ID, 2.000" OD, 0.250" Thick (Pack of 1) Reviews

Other Picture

Extra-Thick Fender Flat Washer, 18-8 Stainless Steel, Plain Finish, Round Shape, USA Made, 0.344" ID, 2.000" OD, 0.250" Thick (Pack of 1) Feature

• Fender Flat Washers have extra large outside diameters in relation to their bolt size
• Extra large Outside Diameter spreads the load over a wider area, and the extra thickness of these washers provide extra strength as well
• A stamped product from low carbon steel, soft, and zinc plated for corrosion resistance
• A versatile washer used anywhere that a large bearing surface and thickness are needed
• Made In USA for excellent quality conformance

Fender Flatwashers were named because of their original use in auto body repair. The large outer diameter covered up a lot of area, and also spread the load across a wide area of thin sheet metal. In todays world these washers are used in electrical, construction, HVAC, and general industrial applications. The purpose of a washer is to spread the load from the head of the bolt across a wider area than the bolt head, which increases the strength of the joint. Fender washers do this well because the outer diameter is so much larger than the diameter of a standard flat washer. These extra thick Fender washers are manufactured in Steel Zinc, 18-8 Stainless Steel, and Type 316 Stainless Steel. The increased thickness provides superior strength, as the thicker the washer, the stronger it gets.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 18, 2011 17:29:04

Fender Flat Washer, 316 Stainless Steel, Round Shape, Plain Finish, USA Made, 1/4" Bolt Size, 0.266" ID, 0.563" OD, 0.056-0.070" Thick (Pack of 25)

Fender Flat Washer, 316 Stainless Steel, Round Shape, Plain Finish, USA Made, 1/4" Bolt Size, 0.266" ID, 0.563" OD, 0.056-0.070" Thick (Pack of 25) Reviews

Other Picture

Fender Flat Washer, 316 Stainless Steel, Round Shape, Plain Finish, USA Made, 1/4" Bolt Size, 0.266" ID, 0.563" OD, 0.056-0.070" Thick (Pack of 25) Feature

• Fender Flat Washers have extra large outside diameters in relation to their bolt size
• Extra large Outside Diameter spreads the load over a wider area
• 316 Stainless Steel offers more corrosion resistance over the standard 18-8 grades
• Great for exposure to salt water, chemical rich environments

Fender Flatwashers were named because of their original use in auto body repair. The large outer diameter covered up a lot of area, and also spread the load across a wide area of thin sheet metal. In todays world these washers are used in electrical, construction, HVAC, and general industrial applications. The purpose of a washer is to spread the load from the head of the bolt across a wider area than the bolt head, which increases the strength of the joint. Fender washers do this well because the outer diameter is so much larger than the diameter of a standard flat washer. These standard (thin) Fender washers are manufactured in Steel Zinc, 18-8 Stainless Steel, and Type 316 Stainless Steel.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Stainless Steel 316 Machine Screw, Flat Head, Phillips Drive, #6-32, 1-1/4" Length (Pack of 25)
• Stainless Steel 316 Machine Screw, Pan Head, Phillips Drive, #4-40, 1/4" Length (Pack of 25)
• Stainless Steel Sheet Metal Screw, Hex Head, Self-Drilling Point, #8-18, 3/4" Length (Pack of 100)
• 3 Pc. Power Extension Socket Adaptor for Drills

Detail Reviews

Jul 12, 2011 08:22:04

Fender Flat Washer, 316 Stainless Steel, Round Shape, Plain Finish, USA Made, 3/8" Bolt Size, 0.406" ID, 1.625" OD, 0.056-0.070" Thick (Pack of 10)

Fender Flat Washer, 316 Stainless Steel, Round Shape, Plain Finish, USA Made, 3/8" Bolt Size, 0.406" ID, 1.625" OD, 0.056-0.070" Thick (Pack of 10) Reviews

Other Picture

Fender Flat Washer, 316 Stainless Steel, Round Shape, Plain Finish, USA Made, 3/8" Bolt Size, 0.406" ID, 1.625" OD, 0.056-0.070" Thick (Pack of 10) Feature

• Fender Flat Washers have extra large outside diameters in relation to their bolt size
• Extra large Outside Diameter spreads the load over a wider area
• 316 Stainless Steel offers more corrosion resistance over the standard 18-8 grades
• Great for exposure to salt water, chemical rich environments

Fender Flatwashers were named because of their original use in auto body repair. The large outer diameter covered up a lot of area, and also spread the load across a wide area of thin sheet metal. In todays world these washers are used in electrical, construction, HVAC, and general industrial applications. The purpose of a washer is to spread the load from the head of the bolt across a wider area than the bolt head, which increases the strength of the joint. Fender washers do this well because the outer diameter is so much larger than the diameter of a standard flat washer. These standard (thin) Fender washers are manufactured in Steel Zinc, 18-8 Stainless Steel, and Type 316 Stainless Steel.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Stainless Steel 316 Machine Screw, Flat Head, Phillips Drive, #6-32, 1-1/4" Length (Pack of 25)
• Stainless Steel 316 Machine Screw, Pan Head, Phillips Drive, 1/4"-20, 3/4" Length (Pack of 25)
• Stainless Steel Sheet Metal Screw, Hex Head, Self-Drilling Point, #10-16, 3/4" Length (Pack of 100)
• 3 Pc. Power Extension Socket Adaptor for Drills

Detail Reviews

Jul 06, 2011 23:45:04

Machined Flat Washer with Beveled Outside Edge, Soft Steel, Plain Finish, Round Shape, USA Made, 0.781" ID, 1.500" OD, 0.250" Thick (Pack of 5)

Machined Flat Washer with Beveled Outside Edge, Soft Steel, Plain Finish, Round Shape, USA Made, 0.781" ID, 1.500" OD, 0.250" Thick (Pack of 5) Reviews

Other Picture

Machined Flat Washer with Beveled Outside Edge, Soft Steel, Plain Finish, Round Shape, USA Made, 0.781" ID, 1.500" OD, 0.250" Thick (Pack of 5) Feature

• Beveled Flat Washers are machined on Lathes, and feature a large bevel or chamfer on the top side
• Originally called "Williams Washers" the large beveled edge on the top of the washer assists operators in assembling products in mass quantities
• 12L14 Low Carbon Steel is machined, and then left soft and plain
• Used in many general industrial applications where corrosion resistance is not needed
• Made In USA for excellent quality conformance

Beveled Flat Washers (also known as "Williams Washers") are turned from solid bar, and feature a large bevel or chamfer on the top outside edge. Originally manufactured for the dual purpose of protecting assemblers from the sharp edges that are possible with a stamped washer, and also to allow them to orient the washer quickly, these washers have gained popularity for other purposes. Used in construction and architectural applications as an interesting visual part of the design, they offer the strength that is provided by their thickness. A small inner diameter provides a tight fit to bolts, rods, and studs, and eliminates most shifting and vibration of the washer. General industrial, marine, power transmission, and agricultural uses are popular.

Manufactured on Lathes from 12L14 Low Carbon Steel, this washer is left soft and plain. Useful for welding this washer to other components, or using it in another manufacturing process. 100% USA made. Available from #10 through 1-1/4" Bolt Size.

Visit Store Now !!

Detail Products

Detail Reviews

Jun 22, 2011 09:24:03

Machined Flat Washer with Beveled Outside Edge, Soft Steel, Plain Finish, Round Shape, USA Made, 0.906" ID, 1.750" OD, 0.250" Thick (Pack of 5)

Machined Flat Washer with Beveled Outside Edge, Soft Steel, Plain Finish, Round Shape, USA Made, 0.906" ID, 1.750" OD, 0.250" Thick (Pack of 5) Reviews

Other Picture

Machined Flat Washer with Beveled Outside Edge, Soft Steel, Plain Finish, Round Shape, USA Made, 0.906" ID, 1.750" OD, 0.250" Thick (Pack of 5) Feature

• Beveled Flat Washers are machined on Lathes, and feature a large bevel or chamfer on the top side
• Originally called "Williams Washers" the large beveled edge on the top of the washer assists operators in assembling products in mass quantities
• 12L14 Low Carbon Steel is machined, and then left soft and plain
• Used in many general industrial applications where corrosion resistance is not needed
• Made In USA for excellent quality conformance

Beveled Flat Washers (also known as "Williams Washers") are turned from solid bar, and feature a large bevel or chamfer on the top outside edge. Originally manufactured for the dual purpose of protecting assemblers from the sharp edges that are possible with a stamped washer, and also to allow them to orient the washer quickly, these washers have gained popularity for other purposes. Used in construction and architectural applications as an interesting visual part of the design, they offer the strength that is provided by their thickness. A small inner diameter provides a tight fit to bolts, rods, and studs, and eliminates most shifting and vibration of the washer. General industrial, marine, power transmission, and agricultural uses are popular.

Manufactured on Lathes from 12L14 Low Carbon Steel, this washer is left soft and plain. Useful for welding this washer to other components, or using it in another manufacturing process. 100% USA made. Available from #10 through 1-1/4" Bolt Size.

Visit Store Now !!

Detail Products

Detail Reviews

May 25, 2011 16:45:12

Machined Flat Washer with Beveled Outside Edge, Soft Steel, Plain Finish, Round Shape, USA Made, 0.203" ID, 0.500" OD, 0.094" Thick (Pack of 25)

Machined Flat Washer with Beveled Outside Edge, Soft Steel, Plain Finish, Round Shape, USA Made, 0.203" ID, 0.500" OD, 0.094" Thick (Pack of 25) Reviews

Other Picture

Machined Flat Washer with Beveled Outside Edge, Soft Steel, Plain Finish, Round Shape, USA Made, 0.203" ID, 0.500" OD, 0.094" Thick (Pack of 25) Feature

• Beveled Flat Washers are machined on Lathes, and feature a large bevel or chamfer on the top side
• Originally called "Williams Washers" the large beveled edge on the top of the washer assists operators in assembling products in mass quantities
• 12L14 Low Carbon Steel is machined, and then left soft and plain
• Used in many general industrial applications where corrosion resistance is not needed
• Made In USA for excellent quality conformance

Beveled Flat Washers (also known as "Williams Washers") are turned from solid bar, and feature a large bevel or chamfer on the top outside edge. Originally manufactured for the dual purpose of protecting assemblers from the sharp edges that are possible with a stamped washer, and also to allow them to orient the washer quickly, these washers have gained popularity for other purposes. Used in construction and architectural applications as an interesting visual part of the design, they offer the strength that is provided by their thickness. A small inner diameter provides a tight fit to bolts, rods, and studs, and eliminates most shifting and vibration of the washer. General industrial, marine, power transmission, and agricultural uses are popular.

Manufactured on Lathes from 12L14 Low Carbon Steel, this washer is left soft and plain. Useful for welding this washer to other components, or using it in another manufacturing process. 100% USA made. Available from #10 through 1-1/4" Bolt Size.

Visit Store Now !!

Detail Products

Detail Reviews

May 23, 2011 23:14:08