Fiberglass Flat Washer, ANSI, 3/8", 0.406" ID, 1" OD, 0.063" Thick (Pack of 10) Reviews
Fiberglass Flat Washer, ANSI, 3/8", 0.406" ID, 1" OD, 0.063" Thick (Pack of 10) Feature
- Washers distribute load on a fastener
- Fiberglass is suitable for applications where tensile strength to weight, non-conductivity and corrosion resistance are all important considerations
- Size Name corresponds to matching screw or bolt size
Nonconductive and resistant to many corrosives, Fiberglass is a good choice for applications threatened by salt water, oils, mild solvents, and other harsh environments. G-10 is a glass reinforced fiberglass, utilizing a continuous woven glass fabric laminated with an epoxy resin. The glass reinforcing increases tensile strength over non-reinforced fiberglass, G-10 in particular is rated at 38,000 psi (pounds per square inch range). G-10 exhibits a high tensile strength to weight ratio, approximately twice that of Aluminum 2024, for example. G-10 is very non-porous, and will only absorb 0.1% of water if left to soak for 24 hours. G-10 is flame retardant and will operate at temperatures up to 280 degrees without degrading. This material is recommended for applications where superior strength and excellent electrical insulative properties are required over a wide range of temperatures.
Detail Products
- Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
- Nylon 6/6 Shoulder Washer, #10, 0.201" ID, 0.437" OD, 0.06" Thick (Pack of 100)
- Stainless Steel Machine Screw, Flat Head, Slotted Drive, #0-80, 1/4" Length (Pack of 100)
- Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #6-32, 1/2" Length (Pack of 100)
- Stainless Steel Machine Screw, Binding Head, Slotted Drive, #12-24, 1/2" Length (Pack of 100)
Detail Reviews
Jun 05, 2011 04:25:06
0 comments:
Post a Comment