Component Flat Washer, Brass, Round Shape, USA Made, 1" Bolt Size, 1.031" ID, 2.000" OD, 0.188" Thick (Pack of 1)

Component Flat Washer, Brass, Round Shape, USA Made, 1" Bolt Size, 1.031" ID, 2.000" OD, 0.188" Thick (Pack of 1) Reviews

Other Picture

Component Flat Washer, Brass, Round Shape, USA Made, 1" Bolt Size, 1.031" ID, 2.000" OD, 0.188" Thick (Pack of 1) Feature

• An extra thick flat washer that comes in steel, 18-8 and 316 Stainless, and Brass
• A stamped flatwasher originally used in the tool and die industry, and now used for its' extra thick design which has superior load distribution properties
• Brass is a soft material that offers excellent corrosion resistance, especially in marine environments, and are not magnetic
• Used for general MRO and industrial applications - excellent for marine environments
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. Brass material offers excellent corrosion resistance, are non magnetic, soft, and are an attractive gold color.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Brass C260 Seamless Round Tubing, 3/8" OD,0.317"ID, 0.029" Wall, 12" Length
• Advanced Tool Design Model ATD-359 110 Piece Copper Washer Assortment
• Dremel 512E EZ Lock Fine Grit Finishing Abrasive Buffs, 2-Pack
• SE Pick Set, 12Pc
• SE Diamond Wheel Set 6PC DW13 1/8" Shank

Detail Reviews

Sep 28, 2011 12:25:04

3/8X7/8 Outer Diameter Brass Flat Washer (25 count)

3/8X7/8 Outer Diameter Brass Flat Washer (25 count) Reviews

Other Picture

3/8X7/8 Outer Diameter Brass Flat Washer

Visit Store Now !!

Detail Products

Detail Reviews

Sep 26, 2011 20:38:05

Component Flat Washer, Brass, Round Shape, USA Made, #4 Bolt Size, 0.125" ID, 0.250" OD, 0.063" Thick (Pack of 10)

Component Flat Washer, Brass, Round Shape, USA Made, #4 Bolt Size, 0.125" ID, 0.250" OD, 0.063" Thick (Pack of 10) Reviews

Other Picture

Component Flat Washer, Brass, Round Shape, USA Made, #4 Bolt Size, 0.125" ID, 0.250" OD, 0.063" Thick (Pack of 10) Feature

• An extra thick flat washer that comes in steel, 18-8 and 316 Stainless, and Brass
• A stamped flatwasher originally used in the tool and die industry, and now used for its' extra thick design which has superior load distribution properties
• Brass is a soft material that offers excellent corrosion resistance, especially in marine environments, and are not magnetic
• Used for general MRO and industrial applications - excellent for marine environments
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. Brass material offers excellent corrosion resistance, are non magnetic, soft, and are an attractive gold color.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

• Brass C260 Seamless Round Tubing, 3/8" OD,0.317"ID, 0.029" Wall, 12" Length
• Advanced Tool Design Model ATD-359 110 Piece Copper Washer Assortment
• Dremel 512E EZ Lock Fine Grit Finishing Abrasive Buffs, 2-Pack
• SE Pick Set, 12Pc
• SE Diamond Wheel Set 6PC DW13 1/8" Shank

Detail Reviews

Sep 24, 2011 23:50:03

Beveled FW Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1-1/8" Bolt Size, 1.156" ID, 2.250" OD, 0.313" Thick (Pack of 1)

Beveled FW Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1-1/8" Bolt Size, 1.156" ID, 2.250" OD, 0.313" Thick (Pack of 1) Reviews

Other Picture

Beveled FW Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1-1/8" Bolt Size, 1.156" ID, 2.250" OD, 0.313" Thick (Pack of 1) Feature

• Beveled Flat Washers are machined on Lathes, and feature a large bevel or chamfer on the top side
• The top bevel allows easier installation in tight spaces, and the part looks like a design feature of any product it is used on
• 18-8 Stainless Steel has a nice surface finish and is the most commonly used corrosion resistant material used
• Chemical, Marine, outdoor, power transmission are a few industries where these parts are used
• Made In USA for excellent quality conformance

Beveled Flat Washers (also known as "Williams Washers") are turned from solid bar, and feature a large bevel or chamfer on the top outside edge. Originally manufactured for the dual purpose of protecting assemblers from the sharp edges that are possible with a stamped washer, and also to allow them to orient the washer quickly, these washers have gained popularity for other purposes. Used in construction and architectural applications as an interesting visual part of the design, they offer the strength that is provided by their thickness. A small inner diameter provides a tight fit to bolts, rods, and studs, and eliminates most shifting and vibration of the washer. General industrial, marine, power transmission, and agricultural uses are popular.

Manufactured on Lathes from Type 303 Stainless Steel bar, this washer is 100% USA made. Available from #10 through 1-1/4" Bolt Size.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 24, 2011 03:10:05

Vespel Flat Washer, #10, 0.203" ID, 0.406" OD, 0.04" Thick (Pack of 1)

Vespel Flat Washer, #10, 0.203" ID, 0.406" OD, 0.04" Thick (Pack of 1) Reviews

Other Picture

Vespel Flat Washer, #10, 0.203" ID, 0.406" OD, 0.04" Thick (Pack of 1) Feature

• Flat Washers are an economical choice
• Vespel is suitable where high temperature, high strength, and low levels of outgassing are desirable
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Vespel is a high performance polyimide material, which can operate continuously from cryogenic temperatures to 550 degrees Fahrenheit, with excursions to 900 degrees Fahrenheit. Vespel parts exhibit superior performance in a variety of applications requiring low wear and long life in severe environments. Vespel, unlike most plastics, is non-flammable. Parts perform without melting or softening, and resist radiation sterilization more effectively than most other plastics. Vespel parts exhibit a very low level of outgassing, even in high vacuum environments, and are chemically compatible with most fuels, solvents, lubricants and hydraulic fluids. Vespel has above average tensile strength for a polymer, at 12,600 psi (pounds per square inch). Vespel will absorb 0.24% of its weight when exposed to water for 24 hours. Vespel is extremely impact resistant, rated at 14 foot pounds (on the Izod Impact Scale), which compares favorably against Nylon 6/6 at 3 foot pounds. Vespel also has excellent insulating properties, measured in terms of dielectric strength, with a rating of 260 volts/millimeter.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 22, 2011 08:38:04

1/4 SAE Flat Washer-Chrome

1/4 SAE Flat Washer-Chrome Reviews

Other Picture

5/8" O.D.

Visit Store Now !!

Detail Products

• 5/16 SAE Flat Washer-Chrome
• 3/8 SAE Flat Washer-Chrome

Detail Reviews

Sep 21, 2011 11:21:03

Hard Fiber Flat Washer, 5/16", 0.344" ID, 0.875" OD, 0.063" Thick (Pack of 100)

Hard Fiber Flat Washer, 5/16", 0.344" ID, 0.875" OD, 0.063" Thick (Pack of 100) Reviews

Other Picture

Hard Fiber Flat Washer, 5/16", 0.344" ID, 0.875" OD, 0.063" Thick (Pack of 100) Feature

• Flat Washers are an economical choice^Hard Vulcanized Fiber is suitable for insulation or light duty sealing jobs^Hard Fiber Washers resist compression and help maintain appropriate spacing between materials or parts^Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

This commercial grade vulcanized fiber material performs with continuous heat resistance to 212 degrees Fahrenheit under no load conditions.

Visit Store Now !!

Detail Products

• Nylon 6/6 Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #5-40, 1/4" Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.140" ID, 0.187" OD, 0.035" Thick, 0.312" Shoulder Diameter, 0.062" Length (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, MIL-SPEC, 1/4"-20, 2" Length (Pack of 100)

Detail Reviews

Sep 20, 2011 06:01:07

Precision Shim Flat Washer for Bearing Outer Race Spacing, 18-8 Stainless Steel, Round Shape, USA Made, 0.088"-0.093" ID, 0.148"-0.153" OD, 0.010" Thick (Pack of 25)

Precision Shim Flat Washer for Bearing Outer Race Spacing, 18-8 Stainless Steel, Round Shape, USA Made, 0.088"-0.093" ID, 0.148"-0.153" OD, 0.010" Thick (Pack of 25) Reviews

Other Picture

Precision Shim Flat Washer for Bearing Outer Race Spacing, 18-8 Stainless Steel, Round Shape, USA Made, 0.088"-0.093" ID, 0.148"-0.153" OD, 0.010" Thick (Pack of 25) Feature

• Shim washers are manufactured with extremely tight thickness tolerances so they can be used to make up an exact dimension
• Designed to protect the outer race of a bearing, or for a special dimensioned flat washer
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• Precision machinery, technical instrumentation, prototypes, model makers, power transmission
• Made In USA for excellent quality conformance

These Shim Washers are also known as Bearing Outer Race Spacers, and Precision Shaft Spacing Shim Washers. A comprehensive line offering thicknesses from 0.003" up to 0.020" from stock. Sizes are keyed to industry standard bearings - 3/64 X 5/32", .055 X 3/16", 5/64 X 1/4", 1/8 X 1/4", 3/32 X 5/16", 1/8 X 5/16", 1/8 X 3/8", 3/16 X 3/8", 3/16 X 1/2", 1/4 X 1/2", 1/4 X 5/8", 3/8 X 7/8". Manufactured from full hard 300 series stainless for strength and corrosion resistance. 100% made in the USA of DFARS compliant steel.

Used originally to go between the outer race of a bearing and the component that it is attached to, they have evolved into a tight tolerance precision shim used in electronics, industrial, and power transmission applications. Precision stamped, and burr free.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 19, 2011 10:30:03

Component Flat Washer, Steel, Black Oxide, Round Shape, USA Made, 0.188" ID, 0.438" OD, 0.078" Thick (Pack of 25)

Component Flat Washer, Steel, Black Oxide, Round Shape, USA Made, 0.188" ID, 0.438" OD, 0.078" Thick (Pack of 25) Reviews

Other Picture

Component Flat Washer, Steel, Black Oxide, Round Shape, USA Made, 0.188" ID, 0.438" OD, 0.078" Thick (Pack of 25) Feature

• Component Flat Washers are manufactured with thicker materials for extra strength and load distribution properties
• The tight fit of the inner diameter minimizes movement, and the thickness provides extra strength
• Low Carbon Steel is case hardened for extra wear resistance, and then black oxide plated for appearance
• Originally used in the tool and die industries, these washers have gained acceptance in MRO, Machinery, and Component industries
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. Low Carbon Steel is case hardened for extra surface hardness, while retaining the flexibility of a soft inner core, and then black oxide plated for an attractive finish.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 18, 2011 15:17:04

3/8X1 1/2 Fender Washer-Chrome

3/8X1 1/2 Fender Washer-Chrome Reviews

Other Picture

3/8X1 1/2 Fender Washer-Chrome

Visit Store Now !!

Detail Products

Detail Reviews

Sep 16, 2011 19:15:18

Precision Shim Flat Washer for Bearing Outer Race Spacing, 18-8 Stainless Steel, Round Shape, USA Made, 0.167"-0.172" ID, 0.243"-0.248" OD, 0.003" Thick (Pack of 25)

Precision Shim Flat Washer for Bearing Outer Race Spacing, 18-8 Stainless Steel, Round Shape, USA Made, 0.167"-0.172" ID, 0.243"-0.248" OD, 0.003" Thick (Pack of 25) Reviews

Other Picture

Precision Shim Flat Washer for Bearing Outer Race Spacing, 18-8 Stainless Steel, Round Shape, USA Made, 0.167"-0.172" ID, 0.243"-0.248" OD, 0.003" Thick (Pack of 25) Feature

• Shim washers are manufactured with extremely tight thickness tolerances so they can be used to make up an exact dimension
• Designed to protect the outer race of a bearing, or for a special dimensioned flat washer
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• Precision machinery, technical instrumentation, prototypes, model makers, power transmission
• Made In USA for excellent quality conformance

These Shim Washers are also known as Bearing Outer Race Spacers, and Precision Shaft Spacing Shim Washers. A comprehensive line offering thicknesses from 0.003" up to 0.020" from stock. Sizes are keyed to industry standard bearings - 3/64 X 5/32", .055 X 3/16", 5/64 X 1/4", 1/8 X 1/4", 3/32 X 5/16", 1/8 X 5/16", 1/8 X 3/8", 3/16 X 3/8", 3/16 X 1/2", 1/4 X 1/2", 1/4 X 5/8", 3/8 X 7/8". Manufactured from full hard 300 series stainless for strength and corrosion resistance. 100% made in the USA of DFARS compliant steel.

Used originally to go between the outer race of a bearing and the component that it is attached to, they have evolved into a tight tolerance precision shim used in electronics, industrial, and power transmission applications. Precision stamped, and burr free.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 15, 2011 18:50:03

Dress Flat Washer, Countersunk, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.281" ID, 1.750" OD, 0.281" Thick (Pack of 1)

Dress Flat Washer, Countersunk, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.281" ID, 1.750" OD, 0.281" Thick (Pack of 1) Reviews

Other Picture

Dress Flat Washer, Countersunk, Case Hardened Steel, Black Oxide, Round Shape, USA Made, 0.281" ID, 1.750" OD, 0.281" Thick (Pack of 1) Feature

• A component washer that has a 82 degree countersunk inner diameter that allows any standard flat head screw to seat flush with the top of the washer, presenting a completely finished and smooth appearance
• A machined component perfect for exposed applications that require strength and a smooth and flush dressed appearance
• Machined from 12L14 Low Carbon Steel, with a Black Oxide plating
• A machined component used on faceplates, handles, and anywhere you need flush mount
• Made In USA for excellent quality conformance

Dress Countersunk Washers are designed for standard 82 degree flat head bolts and screws. The countersunk Inner Diameter allows the screw to mount flush in the washer, presenting a safe and good looking joint. Designed for hand wheels, cranks, and any moving part that is on the outside of a product, the washer spreads the load from the joint across a wider area, and presents a safe and secure fastening. Manufactured on Lathes, these fully machined and finished parts are more industrial component than flat washer. The line accepts standard screws from number 8 through 1/4" bolts, with an extra thickness that looks good and provides extra holding power. Made in the USA from DFARS compliant 12L14 Low Carbon Steel, then case hardened and black oxide plated for strength, appearance, and a slight corrosion inhibitor.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 13, 2011 18:39:19

Jumbo Flat Washer, Alloy Steel, Black Oxide, Round Shape, USA Made, 1.625" ID, 3.000" OD, 0.250" Thick (Pack of 1)

Jumbo Flat Washer, Alloy Steel, Black Oxide, Round Shape, USA Made, 1.625" ID, 3.000" OD, 0.250" Thick (Pack of 1) Reviews

Other Picture

Jumbo Flat Washer, Alloy Steel, Black Oxide, Round Shape, USA Made, 1.625" ID, 3.000" OD, 0.250" Thick (Pack of 1) Feature

• Jumbo Washers are designed for extra large bolting from 1-1/2" up to 4" bolt or stud size - not s stamped product
• A machined washer that is extra big, extra strong, and extra fine
• 4140 Alloy Steel is Thru Hardened to Rockwell C40-C50 and then Black Oxide Plated
• Construction, Power generation, Machinery, Transportation
• Made In USA for excellent quality conformance

Jumbo Flat Washers are designed for large bolts - available from stock in both a 4140 Alloy Steel and 18-8 Stainless Steel from 1-3/8" Bolt Szie all the way up to 4" Bolts. Inner Diameter is manufactured 1/8" larger than the bolt to allow for slight alignment issues, and to accomodate a thicker hot dip galvanized bolt shank. Extra large outer diameters and thickness up to 5/16" provide extra bearing surface and extra strength. 4140 Alloy Steels are fully through hardened to Rockwell C40-C50, and finished with a Black Oxide plating. This provides a suitable washer for Grade 5 or Grade 8 bolts, and some Structural Bolting applications. 100% Made in USA, with DFARS compliant raw materials. (Certification available at extra cost, and on special order only). 300 Series Stainless Steels are also DFARS compliant (Certification also available at extra cost, and for special orders only).

Visit Store Now !!

Detail Products

Detail Reviews

Sep 12, 2011 20:31:04