PFC 1/2" x 1-1/2" Fender Washers Zinc Plated - 100 per Box

PFC 1/2" x 1-1/2" Fender Washers Zinc Plated - 100 per Box Reviews

Other Picture

PFC 1/2" x 1-1/2" Fender Washers Zinc Plated - 100 per Box Feature

• Fender Washers for 1/2" Diameter Bolts
• 1-1/2" Outside Diameter
• Zinc Plated to meet ASTM F1941 FeZn3A
• 100 per Box

PFC 1/2" x 1-1/2" Fender Washers Zinc Plated - 100 per Box

Visit Store Now !!

Detail Products

Detail Reviews

May 31, 2011 09:16:05

Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.219" ID, 1.000" OD, 0.125" Thick (Pack of 5)

Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.219" ID, 1.000" OD, 0.125" Thick (Pack of 5) Reviews

Other Picture

Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.219" ID, 1.000" OD, 0.125" Thick (Pack of 5) Feature

• Fender Flat Washers have extra large outside diameters in relation to their bolt size
• Extra large Outside Diameter spreads the load over a wider area, and the extra thickness of these washers provide extra strength as well
• A stamped product from low carbon steel, soft, and zinc plated for corrosion resistance
• A versatile washer used anywhere that a large bearing surface and thickness are needed
• Made In USA for excellent quality conformance

Fender Flatwashers were named because of their original use in auto body repair. The large outer diameter covered up a lot of area, and also spread the load across a wide area of thin sheet metal. In todays world these washers are used in electrical, construction, HVAC, and general industrial applications. The purpose of a washer is to spread the load from the head of the bolt across a wider area than the bolt head, which increases the strength of the joint. Fender washers do this well because the outer diameter is so much larger than the diameter of a standard flat washer. These extra thick Fender washers are manufactured in Steel Zinc, 18-8 Stainless Steel, and Type 316 Stainless Steel. The increased thickness provides superior strength, as the thicker the washer, the stronger it gets.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

May 30, 2011 11:34:05

Beveled FW Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 5/8" Bolt Size, 0.656" ID, 1.250" OD, 0.250" Thick (Pack of 1)

Beveled FW Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 5/8" Bolt Size, 0.656" ID, 1.250" OD, 0.250" Thick (Pack of 1) Reviews

Other Picture

Beveled FW Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 5/8" Bolt Size, 0.656" ID, 1.250" OD, 0.250" Thick (Pack of 1) Feature

• Beveled Flat Washers are machined on Lathes, and feature a large bevel or chamfer on the top side
• The top bevel allows easier installation in tight spaces, and the part looks like a design feature of any product it is used on
• 18-8 Stainless Steel has a nice surface finish and is the most commonly used corrosion resistant material used
• Chemical, Marine, outdoor, power transmission are a few industries where these parts are used
• Made In USA for excellent quality conformance

Beveled Flat Washers (also known as "Williams Washers") are turned from solid bar, and feature a large bevel or chamfer on the top outside edge. Originally manufactured for the dual purpose of protecting assemblers from the sharp edges that are possible with a stamped washer, and also to allow them to orient the washer quickly, these washers have gained popularity for other purposes. Used in construction and architectural applications as an interesting visual part of the design, they offer the strength that is provided by their thickness. A small inner diameter provides a tight fit to bolts, rods, and studs, and eliminates most shifting and vibration of the washer. General industrial, marine, power transmission, and agricultural uses are popular.

Manufactured on Lathes from Type 303 Stainless Steel bar, this washer is 100% USA made. Available from #10 through 1-1/4" Bolt Size.

Visit Store Now !!

Detail Products

Detail Reviews

May 29, 2011 13:17:04

Nylon 6/6 Flat Washer, #10, 0.195" ID, 0.437" OD, 0.040" Thick (Pack of 100)

Nylon 6/6 Flat Washer, #10, 0.195" ID, 0.437" OD, 0.040" Thick (Pack of 100) Reviews

Other Picture

Nylon 6/6 Flat Washer, #10, 0.195" ID, 0.437" OD, 0.040" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M3-0.5, 10mm Length (Pack of 100)
• Nylon 6/6 Hex Nut, 1/4"-20 (Pack of 100)
• Nylon 6/6 Threaded Rod, 5/16"-18, 72" Overall Length (Pack of 1)
• 5mm Metric Flat Washer (100 count)
• Nylon 6/6 Shoulder Washer, 0.120" ID, 0.248" OD, 0.062" Thick, 0.625" Shoulder Diameter, 0.089" Length (Pack of 100)

Detail Reviews

May 28, 2011 10:36:04

PTFE Flat Washer, ANSI, #0, 0.068" ID, 0.188" OD, 0.025" Thick (Pack of 100)

PTFE Flat Washer, ANSI, #0, 0.068" ID, 0.188" OD, 0.025" Thick (Pack of 100) Reviews

Other Picture

PTFE Flat Washer, ANSI, #0, 0.068" ID, 0.188" OD, 0.025" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• PTFE is suitable for high temperature environments and for applications that have the potential for surface wear and exposure to water and chemicals
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

PTFE (polytetrafluoroethylene) has similar properties to Teflon, including an extremely low coefficient of friction (it doesn't stick to other materials and it resists surface wear). PTFE also exhibits a useful service life from below -100 degrees Fahrenheit, to temperatures of over 500 degrees Fahrenheit. Its resistance to solvents is also excellent throughout a wide range of temperatures. PTFE has a high dielectric strength (600 volts/millimeter) which makes it a good insulator. PTFE is also very non-hydroscopic, or water resistant, absorbing less than 0.01% of its weight if exposed to water for a 24 hour period. PTFE has below average tensile strength, at 3000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Stainless Steel 18-8 Flat Washer, ANSI, #1, 0.084" ID, 0.219" OD, 0.025" Thick (Pack of 100)
• PTFE Sheet, White, 0.06" Thick, 6" Width, 6" Length
• Nylon 6/6 Hex Nut, 1/4"-20 (Pack of 100)
• Nylon 6/6 Threaded Rod, 5/16"-18, 72" Overall Length (Pack of 1)

Detail Reviews

May 27, 2011 14:04:03

Component Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1/4" Bolt Size, 0.281" ID, 0.625" OD, 0.188" Thick (Pack of 5)

Component Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1/4" Bolt Size, 0.281" ID, 0.625" OD, 0.188" Thick (Pack of 5) Reviews

Other Picture

Component Flat Washer, 18-8 Stainless Steel, Round Shape, USA Made, 1/4" Bolt Size, 0.281" ID, 0.625" OD, 0.188" Thick (Pack of 5) Feature

• Component Flat Washers are manufactured with thicker materials for extra strength and load distribution properties
• A stamped flatwasher originally used in the tool and die industry, and now used for its' extra thick design which has superior load distribution properties
• 18-8 Stainless Steel has a nice surface finish and is the most commonly used corrosion resistant material used
• Used for general MRO and industrial applications - excellent for marine environments
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. 18-8 Stainless Steel material offers excellent corrosion resistance, are harder than Brass, exhibit a slight magnetism, and are an attractive silver color.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

May 26, 2011 18:12:46

Machined Flat Washer with Beveled Outside Edge, Soft Steel, Plain Finish, Round Shape, USA Made, 0.906" ID, 1.750" OD, 0.250" Thick (Pack of 5)

Machined Flat Washer with Beveled Outside Edge, Soft Steel, Plain Finish, Round Shape, USA Made, 0.906" ID, 1.750" OD, 0.250" Thick (Pack of 5) Reviews

Other Picture

Machined Flat Washer with Beveled Outside Edge, Soft Steel, Plain Finish, Round Shape, USA Made, 0.906" ID, 1.750" OD, 0.250" Thick (Pack of 5) Feature

• Beveled Flat Washers are machined on Lathes, and feature a large bevel or chamfer on the top side
• Originally called "Williams Washers" the large beveled edge on the top of the washer assists operators in assembling products in mass quantities
• 12L14 Low Carbon Steel is machined, and then left soft and plain
• Used in many general industrial applications where corrosion resistance is not needed
• Made In USA for excellent quality conformance

Beveled Flat Washers (also known as "Williams Washers") are turned from solid bar, and feature a large bevel or chamfer on the top outside edge. Originally manufactured for the dual purpose of protecting assemblers from the sharp edges that are possible with a stamped washer, and also to allow them to orient the washer quickly, these washers have gained popularity for other purposes. Used in construction and architectural applications as an interesting visual part of the design, they offer the strength that is provided by their thickness. A small inner diameter provides a tight fit to bolts, rods, and studs, and eliminates most shifting and vibration of the washer. General industrial, marine, power transmission, and agricultural uses are popular.

Manufactured on Lathes from 12L14 Low Carbon Steel, this washer is left soft and plain. Useful for welding this washer to other components, or using it in another manufacturing process. 100% USA made. Available from #10 through 1-1/4" Bolt Size.

Visit Store Now !!

Detail Products

Detail Reviews

May 25, 2011 16:45:12

MIL-SPEC Flat Washer, Meets Spec MS15795, 18-8 Stainless Steel, Round Shape, USA Made, #4 Bolt Size , 0.125" ID, 0.312" OD, 0.032-0.040" Thick (Pack of 100)

MIL-SPEC Flat Washer, Meets Spec MS15795, 18-8 Stainless Steel, Round Shape, USA Made, #4 Bolt Size , 0.125" ID, 0.312" OD, 0.032-0.040" Thick (Pack of 100) Reviews

Other Picture

MIL-SPEC Flat Washer, Meets Spec MS15795, 18-8 Stainless Steel, Round Shape, USA Made, #4 Bolt Size , 0.125" ID, 0.312" OD, 0.032-0.040" Thick (Pack of 100) Feature

• Made in the USA to Military Specifications
• MS15795 series is one of the original general purpose flat washer military specification
• 18-8 Stainless Steel is the most common corrosion resistant Stainless Steel used in Flat Washers
• The sizes listed in this specification cover most industrial and military uses
• Tight tolerances allow use in precision applications

The 3 most popular Military Specification Flat Washers that we offer are MS15795, AN960, NAS1149, and NAS620. These specifications were originally formulated by the Armed Forces of the USA to standardize fasteners being used on military equipment. Over time they have become a popular choice for designers in all industries and programs. All of these specs call out the same material - a 300 series Stainless with passivation. The differences are in the manufacturing tolerances, and the different dimension traits. the first choice should be the MS15795 series, which has the largest OD, and the largest hole diameters. Second choice should be the NAS1149 series. This has a smaller outer diameter, and a tight tolerance on the inner diameter as well as the thickness. AN960 offers an equal to the NAS1149 but with a larger tolerance on the thickness. NAS620 should be the last choice - this series has the smallest outer diameter, and the widest range of thickness tolerance.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

May 24, 2011 21:20:06

Machined Flat Washer with Beveled Outside Edge, Soft Steel, Plain Finish, Round Shape, USA Made, 0.203" ID, 0.500" OD, 0.094" Thick (Pack of 25)

Machined Flat Washer with Beveled Outside Edge, Soft Steel, Plain Finish, Round Shape, USA Made, 0.203" ID, 0.500" OD, 0.094" Thick (Pack of 25) Reviews

Other Picture

Machined Flat Washer with Beveled Outside Edge, Soft Steel, Plain Finish, Round Shape, USA Made, 0.203" ID, 0.500" OD, 0.094" Thick (Pack of 25) Feature

• Beveled Flat Washers are machined on Lathes, and feature a large bevel or chamfer on the top side
• Originally called "Williams Washers" the large beveled edge on the top of the washer assists operators in assembling products in mass quantities
• 12L14 Low Carbon Steel is machined, and then left soft and plain
• Used in many general industrial applications where corrosion resistance is not needed
• Made In USA for excellent quality conformance

Beveled Flat Washers (also known as "Williams Washers") are turned from solid bar, and feature a large bevel or chamfer on the top outside edge. Originally manufactured for the dual purpose of protecting assemblers from the sharp edges that are possible with a stamped washer, and also to allow them to orient the washer quickly, these washers have gained popularity for other purposes. Used in construction and architectural applications as an interesting visual part of the design, they offer the strength that is provided by their thickness. A small inner diameter provides a tight fit to bolts, rods, and studs, and eliminates most shifting and vibration of the washer. General industrial, marine, power transmission, and agricultural uses are popular.

Manufactured on Lathes from 12L14 Low Carbon Steel, this washer is left soft and plain. Useful for welding this washer to other components, or using it in another manufacturing process. 100% USA made. Available from #10 through 1-1/4" Bolt Size.

Visit Store Now !!

Detail Products

Detail Reviews

May 23, 2011 23:14:08

Extra-Thick Component Flat Washer, Steel, Black Oxide, Round Shape, USA Made, 0.281" ID, 0.625" OD, 0.188" Thick (Pack of 10)

Extra-Thick Component Flat Washer, Steel, Black Oxide, Round Shape, USA Made, 0.281" ID, 0.625" OD, 0.188" Thick (Pack of 10) Reviews

Other Picture

Extra-Thick Component Flat Washer, Steel, Black Oxide, Round Shape, USA Made, 0.281" ID, 0.625" OD, 0.188" Thick (Pack of 10) Feature

• Component Flat Washers are manufactured with thicker materials for extra strength and load distribution properties
• Extra Thick for extra strength and load distribution properties
• Low Carbon Steel, Case Hardened, and Black Oxide Plated
• General industrial, mechanical, machinery, power transmission uses
• Made In USA for excellent quality conformance

Component Flat Washers are named for their original popularity as a component of a jig or fixture, where a thicker washer was needed for the extra strength and load distribution properties that accompany the extra thickness. Our Component Washers are available from #4 screw size all the way thru 1-1/2" Bolt sizes. All Component Washers are thicker than any standard washer in general use. We provide two lines from stock - Thick and Extra Thick. Smaller diameters have a 5/64" thickness, going all the way up to 3/8" thickness, with the 1/8" thick line being the most popular. These washers are either stamped on power presses or turned on our lathes depending on the quantities we manufacture, and the wall thickness of the washer, which is the relationship between the thickness and the Inner Diameter dimension. All of these are suitable for use anywhere extra strength is needed. Low Carbon Steel is case hardened for extra surface hardness, while retaining the flexibility of a soft inner core, and then black oxide plated for an attractive finish.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

May 22, 2011 21:20:04

Non-Metallic Flat Washer, Fiberglass, Round Shape, USA Made, #4 Bolt Size, 0.122" ID, 0.310" OD, 0.031" Thick (Pack of 50)

Non-Metallic Flat Washer, Fiberglass, Round Shape, USA Made, #4 Bolt Size, 0.122" ID, 0.310" OD, 0.031" Thick (Pack of 50) Reviews

Other Picture

Non-Metallic Flat Washer, Fiberglass, Round Shape, USA Made, #4 Bolt Size, 0.122" ID, 0.310" OD, 0.031" Thick (Pack of 50) Feature

• Insulating Washers of Fiberglass protect components from heat and electricity, and are chemically resistant
• These washers are thicker compared to their outer diameter than usual, for greater strength and insulation
• Polyster Glass Laminates (Fiberglass) come in light tan and green colors
• This Fiberglass material meets General Purpose NEMA (National Electrical Manufacturers Association) GPO-1 Standards
• Made In USA for excellent quality conformance

Fiberglass washers are insulators of both thermal and electrical energy. They are chemically resistant, and have a high strength to weight ratio. This series is available from stock in sizes from numbe 2 thru 1" bolt sizes. Larger sizes have an oversized outside diameter, which protects and insulates.

Polyster Glass Laminates (Fiberglass) come in light tan and green colors, this material meets General Purpose NEMA (National Electrical Manufacturers Association) GPO-1 Standards.Temperatures up to aprox 200 degress are not a problem for this material

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

May 21, 2011 13:17:04

Nylon Flat Washer, DIN, M2, 2.15mm ID, 5mm OD, 0.8mm Thick (Pack of 100)

Nylon Flat Washer, DIN, M2, 2.15mm ID, 5mm OD, 0.8mm Thick (Pack of 100) Reviews

Other Picture

Nylon Flat Washer, DIN, M2, 2.15mm ID, 5mm OD, 0.8mm Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Frequently used as a material for bearings and other wear surfaces, Nylon 6/6 offers low friction and good fatigue resistance. Nylon has been used in temperatures as low as -40F (-40C). Under flexural load of 264 PSI it endures temperatures as high as 158 to 212F (70 to 100C). Plus it stands up to a wide spectrum of fuels, oils and other chemicals.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Nylon 6/6 Hex Nut, 1/4"-20 (Pack of 100)
• 5mm Metric Flat Washer (100 count)
• Nylon 6/6 Threaded Rod, 1/4"-20, 72" Overall Length (Pack of 1)
• Nylon 6/6 Shoulder Washer, 1/4", 0.260" ID, 0.562" OD, 0.06" Thick (Pack of 100)

Detail Reviews

May 19, 2011 20:15:03

Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.406" ID, 2.000" OD, 0.125" Thick (Pack of 5)

Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.406" ID, 2.000" OD, 0.125" Thick (Pack of 5) Reviews

Other Picture

Extra-Thick Fender Flat Washer, Low Carbon Steel, Zinc Plated, Round Shape, USA Made, 0.406" ID, 2.000" OD, 0.125" Thick (Pack of 5) Feature

• Fender Flat Washers have extra large outside diameters in relation to their bolt size
• Extra large Outside Diameter spreads the load over a wider area, and the extra thickness of these washers provide extra strength as well
• A stamped product from low carbon steel, soft, and zinc plated for corrosion resistance
• A versatile washer used anywhere that a large bearing surface and thickness are needed
• Made In USA for excellent quality conformance

Fender Flatwashers were named because of their original use in auto body repair. The large outer diameter covered up a lot of area, and also spread the load across a wide area of thin sheet metal. In todays world these washers are used in electrical, construction, HVAC, and general industrial applications. The purpose of a washer is to spread the load from the head of the bolt across a wider area than the bolt head, which increases the strength of the joint. Fender washers do this well because the outer diameter is so much larger than the diameter of a standard flat washer. These extra thick Fender washers are manufactured in Steel Zinc, 18-8 Stainless Steel, and Type 316 Stainless Steel. The increased thickness provides superior strength, as the thicker the washer, the stronger it gets.

Made in the USA. These flat washers are produced in the USA for excellent quality conformance. One of the significant differences between less expensive imported products and ours are the way we stamp. Many cheap imports are produced on gang dies that produce 10 or more washers per stroke of the press. Using such a large die means that the individual washer sets are not adjustable - when the punch wears, the dimensions change and there is no way to fix this as the press produces washers, leading to a large variation in the finished part.

Materials available in many other countries are not as consistent as the domestic steels we use, which gives the imports a cheaper cost, but can lead to failures and inconsistencies when the products are used. The Defense Federal Acquisition Regulation Supplement (DFARS) was created to address this problem. Our materials are DFARS compliant although we do not supply the certification except on special order.

Visit Store Now !!

Detail Products

Detail Reviews

May 18, 2011 19:39:04