Nylon 6/6 Flat Washer, 1/2", 0.531" ID, 1.00" OD, 0.060" Thick (Pack of 100)

Nylon 6/6 Flat Washer, 1/2", 0.531" ID, 1.00" OD, 0.060" Thick (Pack of 100) Reviews

Other Picture

Nylon 6/6 Flat Washer, 1/2", 0.531" ID, 1.00" OD, 0.060" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Nylon 6/6 Hex Nut, #4-40 (Pack of 100)
• 5mm Metric Flat Washer (100 count)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M6-1, 16mm Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.140" ID, 0.186" OD, 0.031" Thick, 0.252" Shoulder Diameter, 0.062" Length (Pack of 100)

Detail Reviews

Apr 01, 2011 07:44:04

PEEK Flat Washer, #6, 0.156" ID, 0.312" OD, 0.031" Thick (Pack of 5)

PEEK Flat Washer, #6, 0.156" ID, 0.312" OD, 0.031" Thick (Pack of 5) Reviews

Other Picture

PEEK Flat Washer, #6, 0.156" ID, 0.312" OD, 0.031" Thick (Pack of 5) Feature

• Washers distribute load on a fastener
• PEEK is suitable where high temperature, strength, and chemical resistance are desirable
• Size Name corresponds to matching screw or bolt size

Washers are generally round plates with a hole, designed to distribute the load on a threaded fastener. They can also be used as spacers or to reduce vibration.

Polyetheretherketone (PEEK) is a superpolymer, or high performance thermoplastic which has excellent chemical resistance and is rated for continuous service to 464 degrees Fahrenheit. It has the best fire safety rating of all thermoplastics. It can be radiation sterilized, tolerating radiation to 1100 M rads without undergoing significant change. The Peek used in these fasteners has been reinforced with 30% glass fibers which improves tensile strength to 22,600 psi (pounds per square inch.). Peek resists water absorption, absorbing 0.11% when exposed to water for 24 hours. Peek is extremely impact resistant, rated at 13.6 foot pounds (on the Izod Impact Scale), which compares favorably against Nylon 6/6 at 3 foot pounds. Peek is below average in terms of dielectric strength, for a plastic, with a rating of 175 volts/millimeter (compared to Nylon with a rating of 550 volts/millimeter).

Visit Store Now !!

Detail Products

• PEEK Machine Screw, Pan Head, Slotted Drive, #2-56, 1/2" Length (Pack of 1)

Detail Reviews

Mar 31, 2011 09:58:03

IMPERIAL 76057 SAE ZINK PLATED FLATWASHER 13/32

IMPERIAL 76057 SAE ZINK PLATED FLATWASHER 13/32 Reviews

Other Picture

IMPERIAL 76057 SAE ZINK PLATED FLATWASHER 13/32 Feature

• "IMPERIAL" FLATWASHER
• SSAE Flat Washers.
• ASTM F844.
• SAE approved prime cold-rolled.
• Smooth, burr-free surfaces.

"IMPERIAL" FLATWASHER SSAE Flat Washers. ASTM F844. SAE approved prime cold-rolled. Smooth, burr-free surfaces. ANSI B18.22.1. Zinc plated. Low carbon. Bolt Size: 3/8 Inside Diameter: 13/32 Outside Diameter: 13/16 Quantity: 250/pkg

Visit Store Now !!

Detail Products

Detail Reviews

Mar 30, 2011 12:08:06

Nylon 6/6 Flat Washer, #8, 0.17" ID, 0.375" OD, 0.045" Thick (Pack of 100)

Nylon 6/6 Flat Washer, #8, 0.17" ID, 0.375" OD, 0.045" Thick (Pack of 100) Reviews

Other Picture

Nylon 6/6 Flat Washer, #8, 0.17" ID, 0.375" OD, 0.045" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Nylon 6/6 Hex Nut, #4-40 (Pack of 100)
• 5mm Metric Flat Washer (100 count)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M4-0.7, 40mm Length (Pack of 100)
• Nylon 6/6 Hex Nut, M3-0.5 (Pack of 100)

Detail Reviews

Mar 29, 2011 12:36:06

Phosphor Bronze Flat Washer, 1/2", 0.531" ID, 1.25" OD, 0.016" Thick (Pack of 10)

Phosphor Bronze Flat Washer, 1/2", 0.531" ID, 1.25" OD, 0.016" Thick (Pack of 10) Reviews

Other Picture

Phosphor Bronze Flat Washer, 1/2", 0.531" ID, 1.25" OD, 0.016" Thick (Pack of 10) Feature

• Flat Washers are an economical choice
• Phosphor Bronze resists wear, stress and marine corrosion
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Phosphor Bronze is an alloy of copper, containing 3.5 to 10% tin and a phosphorus content of up to 1%. It resists wear, stress and marine corrosion, and can be polished to a rich, golden shine.

Visit Store Now !!

Detail Products

• Brass Machine Screw, Pan Head, Phillips Drive, #2-56, 9/16" Length (Pack of 100)
• Silicon Bronze Flat Washer, 1/2", 0.562" ID, 1.25" OD, 0.091" Thick (Pack of 25)
• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #3-48, 1/2" Length (Pack of 25)
• Brass Machine Screw, Round Head, Slotted Drive, #8-32, 2-1/4" Length (Pack of 25)

Detail Reviews

Mar 28, 2011 09:00:05

Hillman Fastener Corp 280054 Flat Washer (SAE)

Hillman Fastener Corp 280054 Flat Washer (SAE) Reviews

Other Picture

Zinc plated. Packed 100 per box.Auxiliary retails reflect per each retail. No. 280050: Size: 6 (1 8"), hole: 5 32", O.D.: 3 8" No. 280052: Size: 8 (5 32"), hole: 3 16", O.D.: 7 16" No. 280054: Size: 10 (3 16"), hole: 7 32", O.D.: 1 2" No. 280055: Size: 12

Visit Store Now !!

Detail Products

Detail Reviews

Mar 27, 2011 13:44:08

IMPERIAL 76303 THICK FENDER WASHER 1/4x1-1/2 - ZINC

IMPERIAL 76303 THICK FENDER WASHER 1/4x1-1/2 - ZINC Reviews

Other Picture

IMPERIAL 76303 THICK FENDER WASHER 1/4x1-1/2 - ZINC Feature

• "IMPERIAL" FENDER WASHER
• Zinc plated.
• Low carbon.
• Outside Diameter: 1-1/2
• Box of 100.

"IMPERIAL" FENDER WASHER Thick Fender Washer. Low carbon. Zinc plated. Bolt Size: 1/4 Outside Diameter: 1-1/2 Minimum Thickness: .108 Maximum Thickness: .160 Box of 100.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 26, 2011 14:37:04

IMPERIAL 78615 EXTRA THICK ALLOY USS FLAT WASHERS GR #8 - 1/2"

IMPERIAL 78615 EXTRA THICK ALLOY USS FLAT WASHERS GR #8 - 1/2" Reviews

Other Picture

IMPERIAL 78615 EXTRA THICK ALLOY USS FLAT WASHERS GR #8 - 1/2" Feature

• Size: 1/2"
• Outside Diameter: 1-3/8"
• Inside Diameter: 9/16"
• Thickness: 0.170-.195
• Quantity: 50 Per Package.

"IMPERIAL" DOUBLE THICK USS FLAT WASHERS Size: 1/2" Outside Diameter: 1-3/8" Inside Diameter: 9/16" Thickness: 0.170-.195 Quantity: 50 Per Package. Use with Grade 5 or 8 fasteners. Extra thick alloy uss flat washers High tensile strength, won't dish out. ASTM F436 Rockwell hardness of C38-C45. ASTM A325 and A490 dimensional specifications. Plating: zinc; yellow dichromate plating for corrosion resistance.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 25, 2011 16:18:11

Nylon 6/6 Flat Washer, 3/4", 0.812" ID, 1-3/8" OD, 0.093" Thick (Pack of 100)

Nylon 6/6 Flat Washer, 3/4", 0.812" ID, 1-3/8" OD, 0.093" Thick (Pack of 100) Reviews

Other Picture

Nylon 6/6 Flat Washer, 3/4", 0.812" ID, 1-3/8" OD, 0.093" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• 5mm Metric Flat Washer (100 count)
• Nylon 6/6 Hex Nut, #4-40 (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M3.5-0.6, 10mm Length (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, 5/16"-18, 1" Length (Pack of 100)

Detail Reviews

Mar 24, 2011 08:00:03

#10 USS Flat Washer (100 count)

#10 USS Flat Washer (100 count) Reviews

Other Picture

9/16" O.D.

Visit Store Now !!

Detail Products

Detail Reviews

Mar 22, 2011 21:33:03

3/8 SAE Flat Washer-Chrome

3/8 SAE Flat Washer-Chrome Reviews

Other Picture

13/16" O.D.

Visit Store Now !!

Detail Products

• Chrome Plated Steel Socket Cap Screw, Button Head, Hex Socket Drive, 1/4"-20, 1" Length (Pack of 10)
• Chrome Plated Steel Hex Bolt, 5/16"-18, 4-1/2" Length (Pack of 10)
• 1/4 SAE Flat Washer-Chrome

Detail Reviews

Mar 21, 2011 22:43:05

PEEK Flat Washer, 1/4", 0.281" ID, 0.734" OD, 0.062" Thick (Pack of 1)

PEEK Flat Washer, 1/4", 0.281" ID, 0.734" OD, 0.062" Thick (Pack of 1) Reviews

Other Picture

PEEK Flat Washer, 1/4", 0.281" ID, 0.734" OD, 0.062" Thick (Pack of 1) Feature

• Washers distribute load on a fastener
• PEEK is suitable where high temperature, strength, and chemical resistance are desirable
• Size Name corresponds to matching screw or bolt size

Washers are generally round plates with a hole, designed to distribute the load on a threaded fastener. They can also be used as spacers or to reduce vibration.

Polyetheretherketone (PEEK) is a superpolymer, or high performance thermoplastic which has excellent chemical resistance and is rated for continuous service to 464 degrees Fahrenheit. It has the best fire safety rating of all thermoplastics. It can be radiation sterilized, tolerating radiation to 1100 M rads without undergoing significant change. The Peek used in these fasteners has been reinforced with 30% glass fibers which improves tensile strength to 22,600 psi (pounds per square inch.). Peek resists water absorption, absorbing 0.11% when exposed to water for 24 hours. Peek is extremely impact resistant, rated at 13.6 foot pounds (on the Izod Impact Scale), which compares favorably against Nylon 6/6 at 3 foot pounds. Peek is below average in terms of dielectric strength, for a plastic, with a rating of 175 volts/millimeter (compared to Nylon with a rating of 550 volts/millimeter).

Visit Store Now !!

Detail Products

• PEEK Machine Screw, Pan Head, Slotted Drive, #4-40, 3/8" Length (Pack of 5)

Detail Reviews

Mar 21, 2011 02:24:06

Phosphor Bronze Flat Washer, #10, 0.203" ID, 0.562" OD, 0.01" Thick (Pack of 100)

Phosphor Bronze Flat Washer, #10, 0.203" ID, 0.562" OD, 0.01" Thick (Pack of 100) Reviews

Other Picture

Phosphor Bronze Flat Washer, #10, 0.203" ID, 0.562" OD, 0.01" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Phosphor Bronze resists wear, stress and marine corrosion
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Phosphor Bronze is an alloy of copper, containing 3.5 to 10% tin and a phosphorus content of up to 1%. It resists wear, stress and marine corrosion, and can be polished to a rich, golden shine.

Visit Store Now !!

Detail Products

• Brass Machine Screw, Pan Head, Phillips Drive, #8-32, 5/8" Length (Pack of 100)
• Silicon Bronze Flat Washer, 1/4", 0.26" ID, 0.687" OD, 0.04" Thick (Pack of 100)
• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, 1/4"-20, 3/8" Length (Pack of 100)
• Brass Machine Screw, Round Head, Slotted Drive, #8-32, 2-1/4" Length (Pack of 25)

Detail Reviews

Mar 20, 2011 01:54:04