Nylon Flat Washer, 5/16", 0.317" ID, 0.5" OD, 0.062" Thick (Pack of 100)

Nylon Flat Washer, 5/16", 0.317" ID, 0.5" OD, 0.062" Thick (Pack of 100) Reviews

Other Picture

Nylon Flat Washer, 5/16", 0.317" ID, 0.5" OD, 0.062" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• 5mm Metric Flat Washer (100 count)
• Nylon Hex Nut, #4-40 (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Stainless Steel Machine Screw, Black Oxide Finish, Pan Head, Phillips Drive, #6-32, 3/4" Length (Pack of 10)

Detail Reviews

Feb 28, 2011 23:08:03

PEEK Flat Washer, #6, 0.141" ID, 0.406" OD, 0.04" Thick (Pack of 5)

PEEK Flat Washer, #6, 0.141" ID, 0.406" OD, 0.04" Thick (Pack of 5) Reviews

Other Picture

PEEK Flat Washer, #6, 0.141" ID, 0.406" OD, 0.04" Thick (Pack of 5) Feature

• Washers distribute load on a fastener
• PEEK is suitable where high temperature, strength, and chemical resistance are desirable
• Size Name corresponds to matching screw or bolt size

Washers are generally round plates with a hole, designed to distribute the load on a threaded fastener. They can also be used as spacers or to reduce vibration.

Polyetheretherketone (PEEK) is a superpolymer, or high performance thermoplastic which has excellent chemical resistance and is rated for continuous service to 464 degrees Fahrenheit. It has the best fire safety rating of all thermoplastics. It can be radiation sterilized, tolerating radiation to 1100 M rads without undergoing significant change. The Peek used in these fasteners has been reinforced with 30% glass fibers which improves tensile strength to 22,600 psi (pounds per square inch.). Peek resists water absorption, absorbing 0.11% when exposed to water for 24 hours. Peek is extremely impact resistant, rated at 13.6 foot pounds (on the Izod Impact Scale), which compares favorably against Nylon 6/6 at 3 foot pounds. Peek is below average in terms of dielectric strength, for a plastic, with a rating of 175 volts/millimeter (compared to Nylon with a rating of 550 volts/millimeter).

Visit Store Now !!

Detail Products

• PEEK Machine Screw, Pan Head, Slotted Drive, #10-24, 5/8" Length (Pack of 1)

Detail Reviews

Feb 27, 2011 22:06:04

Felt Flat Washer, ANSI, 5/16", 0.344" ID, 0.875" OD, 0.187" Thick (Pack of 100)

Felt Flat Washer, ANSI, 5/16", 0.344" ID, 0.875" OD, 0.187" Thick (Pack of 100) Reviews

Other Picture

Felt Flat Washer, ANSI, 5/16", 0.344" ID, 0.875" OD, 0.187" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Felt is good for sound reduction, vibration deadening, thermal insulation
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Felt is recommended for applications requiring sound reduction or vibration deadening due to its absorption capacity. It also works well as a thermal insulator, to separate materials without marring, or it can be soaked with oil for use in applications requiring lubrication.

Visit Store Now !!

Detail Products

Detail Reviews

Feb 26, 2011 06:54:04

IMPERIAL 77621 EXTRA THICK ALLOY SAE FLAT WASHERS 1-1/8" GR #8(PACK OF 25)

IMPERIAL 77621 EXTRA THICK ALLOY SAE FLAT WASHERS 1-1/8" GR #8(PACK OF 25) Reviews

Other Picture

IMPERIAL 77621 EXTRA THICK ALLOY SAE FLAT WASHERS 1-1/8" GR #8(PACK OF 25) Feature

• Size: 1-1/8"
• Outside Diameter: 2-1/4
• Inside Diameter: 1-1/4
• Thickness: 0.235-.265
• Use with Grade 5 or 8 fasteners.

"IMPERIAL" DOUBLE THICK FLAT WASHERS Size: 1-1/8" Outside Diameter: 2-1/4 Inside Diameter: 1-1/4 Thickness: 0.235-.265 Use with Grade 5 or 8 fasteners. High tensile strength, won't dish out. ASTM F436 Rockwell hardness of C38-C45. ASTM A325 and A490 dimensional specifications. Zinc; yellow dichromate plating for corrosion resistance.

Visit Store Now !!

Detail Products

Detail Reviews

Feb 25, 2011 11:45:03

Nylon Flat Washer, #8, 0.177" ID, 0.408" OD, 0.062" Thick (Pack of 100)

Nylon Flat Washer, #8, 0.177" ID, 0.408" OD, 0.062" Thick (Pack of 100) Reviews

Other Picture

Nylon Flat Washer, #8, 0.177" ID, 0.408" OD, 0.062" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Visit Store Now !!

Detail Products

• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• 5mm Metric Flat Washer (100 count)
• Nylon Hex Nut, #4-40 (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Stainless Steel Machine Screw, Black Oxide Finish, Pan Head, Phillips Drive, #6-32, 3/4" Length (Pack of 10)

Detail Reviews

Feb 24, 2011 01:15:05

IMPERIAL 176008 304 STAINLESS STEEL FLAT WASHER 3/4

IMPERIAL 176008 304 STAINLESS STEEL FLAT WASHER 3/4 Reviews

More Picture

IMPERIAL 176008 304 STAINLESS STEEL FLAT WASHER 3/4 Feature

• "IMPERIAL SUPPLIES" FLAT WASHER
• 18/8 Stainless Steel Flat Washer.
• Excellent corrosion resistance.
• Industrial Standard.
• Size: 3/4

"IMPERIAL SUPPLIES" FLAT WASHER 18/8 Stainless Steel Flat Washer. Excellent corrosion resistance. Industrial Standard. Size: 3/4 Outside Diameter: 1.875 Inside Diameter: .812 Nominal Thickness: .109

Go tO Store Now !!

More Products

More Reviews

Feb 23, 2011 02:49:03

PEEK Flat Washer, 3/16", 0.188" ID, 0.375" OD, 0.04" Thick (Pack of 25)

PEEK Flat Washer, 3/16", 0.188" ID, 0.375" OD, 0.04" Thick (Pack of 25) Reviews

More Picture

PEEK Flat Washer, 3/16", 0.188" ID, 0.375" OD, 0.04" Thick (Pack of 25) Feature

• Washers distribute load on a fastener
• PEEK is suitable where high temperature, strength, and chemical resistance are desirable
• Size Name corresponds to matching screw or bolt size

Washers are generally round plates with a hole, designed to distribute the load on a threaded fastener. They can also be used as spacers or to reduce vibration.

Polyetheretherketone (PEEK) is a superpolymer, or high performance thermoplastic which has excellent chemical resistance and is rated for continuous service to 464 degrees Fahrenheit. It has the best fire safety rating of all thermoplastics. It can be radiation sterilized, tolerating radiation to 1100 M rads without undergoing significant change. The Peek used in these fasteners has been reinforced with 30% glass fibers which improves tensile strength to 22,600 psi (pounds per square inch.). Peek resists water absorption, absorbing 0.11% when exposed to water for 24 hours. Peek is extremely impact resistant, rated at 13.6 foot pounds (on the Izod Impact Scale), which compares favorably against Nylon 6/6 at 3 foot pounds. Peek is below average in terms of dielectric strength, for a plastic, with a rating of 175 volts/millimeter (compared to Nylon with a rating of 550 volts/millimeter).

Go tO Store Now !!

More Products

• PEEK Machine Screw, Pan Head, Slotted Drive, #10-24, 5/8" Length (Pack of 1)

More Reviews

Feb 22, 2011 07:42:03

24 Packs of Assorted Steel Washers

24 Packs of Assorted Steel Washers Reviews

More Picture

This is a new assorted steel washers

Go tO Store Now !!

More Products

More Reviews

Feb 21, 2011 07:44:05

3/4 SAE Grade 8 Flat Washer (25 count)

3/4 SAE Grade 8 Flat Washer (25 count) Reviews

More Picture

1-1/2" O.D.

Go tO Store Now !!

More Products

More Reviews

Feb 20, 2011 09:18:03

Nylon Flat Washer, #10, 0.2" ID, 0.437" OD, 0.062" Thick (Pack of 100)

Nylon Flat Washer, #10, 0.2" ID, 0.437" OD, 0.062" Thick (Pack of 100) Reviews

More Picture

Nylon Flat Washer, #10, 0.2" ID, 0.437" OD, 0.062" Thick (Pack of 100) Feature

• Flat Washers are an economical choice
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Size Name corresponds to matching screw or bolt size

Standard flat washers are an economical choice when your application calls for spacers, shims, or re-enforcements with nominal dimensions only.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Go tO Store Now !!

More Products

• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• 5mm Metric Flat Washer (100 count)
• Nylon Hex Nut, #4-40 (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M2.5-0.45, 5mm Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.124" ID, 0.219" OD, 0.031" Thick, 0.313" Shoulder Diameter, 0.062" Length (Pack of 100)

More Reviews

Feb 19, 2011 12:51:04