Fiberglass Flat Washer, ANSI, #8, 0.188" ID, 0.5" OD, 0.04" Thick (Pack of 25)

Fiberglass Flat Washer, ANSI, #8, 0.188" ID, 0.5" OD, 0.04" Thick (Pack of 25) Reviews

Other Picture

Fiberglass Flat Washer, ANSI, #8, 0.188" ID, 0.5" OD, 0.04" Thick (Pack of 25) Feature

• Washers distribute load on a fastener
• Fiberglass is suitable for applications where tensile strength to weight, non-conductivity and corrosion resistance are all important considerations
• Size Name corresponds to matching screw or bolt size

Washers are generally round plates with a hole, designed to distribute the load on a threaded fastener. They can also be used as spacers or to reduce vibration.

Nonconductive and resistant to many corrosives, Fiberglass is a good choice for applications threatened by salt water, oils, mild solvents, and other harsh environments. G-10 is a glass reinforced fiberglass, utilizing a continuous woven glass fabric laminated with an epoxy resin. The glass reinforcing increases tensile strength over non-reinforced fiberglass, G-10 in particular is rated at 38,000 psi (pounds per square inch range). G-10 exhibits a high tensile strength to weight ratio, approximately twice that of Aluminum 2024, for example. G-10 is very non-porous, and will only absorb 0.1% of water if left to soak for 24 hours. G-10 is flame retardant and will operate at temperatures up to 280 degrees without degrading. This material is recommended for applications where superior strength and excellent electrical insulative properties are required over a wide range of temperatures.

Visit Store Now !!

Detail Products

• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.115" ID, 0.137" OD, 0.046" Thick, 0.240" Shoulder Diameter, 0.077" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #3-48, 1/4" Length (Pack of 100)
• Zinc Plated Steel Sheet Metal Screw, Pan Head, Phillips Drive, #6-20, 1/2" Length (Pack of 100)
• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, #4-40, 3/8" Length (Pack of 100)

Detail Reviews

Aug 12, 2011 03:06:08